[Group] Singapore BAJAJ Team (SBT)

[Seif]

haiz....

checked my eo level this morning and found it very very low...

slight leak at the bottom of my bike...

saw a very small puddle

heading to fix later....

 

when it leaks drop by drop its hard to know that its going low.. unless we check every other day..

 

oh yeh wonder what happened to speeds leaking issue..

[m0bIlEnErD]

The left case gasket leak is pretty common I think.

Need to replace the gasket and tighten it up.

[ORen]

Decided not to fix the Hang Guard: don't want to part with my Rizoma weights. If someone wants it, it's yours for the same price i got it from MJ. Otherwise I'll sell it on the Garage Sale section.

I installed the handle bar riser. Definitely a change in the riding position. More upward. I have to try it for a few days and also with pillion to see how it feels, will report in a week or so. But the quality is good and it's easy to fix.

[speedaddict]

Is there a switch for the handle guard or something for the Led?

[ORen]

No, it only comes with the wires, if you want a switch, you have to bring it when they install it so they can add it.

But I don't think you need it, if you tap into the ignition it's good enough, you want that ON all the time anyway don't you ?

[ORen]

Anyone knows where I can go to get custom made racks for my saddle bags ? Like a welder who has either experience with bikes, or not but is ok to make something out of photos/explainations.

I wonder if it would be cheaper to get them custom made, rather than use Givi ones for example. Also my bags have a sizing of their own, and I'm thinking of maye adding a small "L" bracket at the bottom of the rack to serve as a "step" for the bags to sit on...

 

So if you know where in Singapore I can go to find shop that can make stainless steel or aluminum stuff, please share

[Brandonwang]

Anyone knows where I can go to get custom made racks for my saddle bags ? Like a welder who has either experience with bikes, or not but is ok to make something out of photos/explainations.

I wonder if it would be cheaper to get them custom made, rather than use Givi ones for example. Also my bags have a sizing of their own, and I'm thinking of maye adding a small "L" bracket at the bottom of the rack to serve as a "step" for the bags to sit on...

 

So if you know where in Singapore I can go to find shop that can make stainless steel or aluminum stuff, please share

 

U can get customize rack from Seng Kwang located at amk industrial park 2A level 5. He is expensive but the workmanship is solid. When u going to consult him let me know i'm oso planning to custom a rack for my saddle bag as well :):):)

[Fredd]

yep..in sg so far sk is e best..u can also go to ban hock hin at defu..pricing wise no idea..but can always call to enquire

[ORen]

Thanks a lot guys, will check them out this afternoon

[Fredd]

sk? wad tyme u goin?

 

Thanks a lot guys' date=' will check them out this afternoon [/quote']

[alvinyansg]

contact gaban...his pulsar has it...

[fircyber]

Maybe Heading sim lim tower to get switch, crimp , flexi led, swicth n connectors n heat shrink.

[Seif]

how to change the username in SBF? i've done it before but cant seem to find it

[revhappy]

Thanks a lot guys' date=' will check them out this afternoon [/quote']

 

Wow! All you guys seem to be very free going to UM etc on weekdays duing the daytime. I wish my job allowed me to go like that and do stuffs during the day

[Fredd]

its whether u wan or u dun wan onli..hehehe..can always take off, leave or juz take mc

 

Wow! All you guys seem to be very free going to UM etc on weekdays duing the daytime. I wish my job allowed me to go like that and do stuffs during the day

[ORen]

@revhappy, I don't work anymore, that's why. When I was working, there was no way I could even get the groceries shopping done, let alone go to UM.. Don't worry, everyone who works a demanding job can only find free time on the WE ..

Edited May 6, 2011 by O'Ren

[fizhlmocca]

guys add me on fb http://www.facebook.com/fizhlmocca

[ORen]

Went to SK to query on the frame/brackets for the saddle bags. Sorry Fredd, didn't check back to forum, had a few things to do this afternoon and went to SK after that.

 

Met William, one of the two bothers who own the shop. Very friendly and nice guy, we chatted a while about the different options available. Like I read on SBF, they are a bit expensive, but seem to do life lasting work with excellent steel quality.

Roughly to give others an idea of the cost, a frame for saddle bags is about $120-140 per side. Depending on the type of frame (rod or flat). This includes all the fixations of course, and also any holes or small tweaks you want to add to help attach your bags.

If you want to add a lower plate to the frame so the bag "sits" on it, count another $30 per side. But by doing that, you weight on the frame and on the bike more, so careful how much you load the bags.

 

For brackets for bigger bikes, or for boxes, prices start at $150 to $180-200 per side, and go up as you add fixation points and brackets/layers to the rack to make it stronger. Diameter of the rod used also plays a part in the price.

 

Overall, definitely more expensive than a factory made rack, but I believe with SK you can get exactly what you are looking for, and the quality is undeniable.

They can also move your signal lights if needed and fix them the way you want them, if they are in the way of your bags/boxes.

 

They can pretty much do any type of bracket, fixation bar, tail fixation, back plate for your bike's seat , racks or engine guard you can imagine !

 

Hope this helps Brandon and others who might be interested. I asked him tons of questions so ask me and maybe I have the answer. He's also happy to let you watch him do your rack and ask him questions as he works if you want to learn more or are curious to see the process.

You must count approx 1 day to leave the bike at his shop. Usually 1 day is what he asks for, but he says if not busy maybe in a few hours it can be done, depends on the other jobs he has that day. He can't take a job on the spot, usually he will give you an appointment for a few days later, when he has a slot free.

Edited May 6, 2011 by O'Ren

[speedaddict]

Anyone going sim lim help me get a switch and red pole lights with glass cover....

[arthur_chan]

this sun 8may 3pm opp lab coffee shop.

meeting 2 others to buy helmet, any other still want to buy can join.

[alvinyansg]

just came back from UM

was there since 1pm+

fix my leaking problem

is oil seal and changed mineral EO

fixed up my hand guards also

wired it to the ignition switch

the light on the guards are not bright as expected

you can easily swap with those LED strips from sim lim

for those who intend to fix up using the original bolts,not recommended as the bolts are too thin

might not be able to hold the weight of the guards...

[alvinyansg]

message from ah teck to all sinnob users,

when you head down to UM for your next servicing, do ask the mech to thighten the 4 securing bolts of your sinnob...

when you first install the sinnob,it is tighten to the max but due to the paint on the sinnob and bolts starting to wear off,your bolts will be slightly loose

[alvinyansg]

another shop for those interested in metal works

 

Ah Ann

5 kaki bukit road 1 #01-07 TechnoLink

its opps motorworld building(instead of its on the right side, its on the left side, along the big canal)

[haktek]

Death of my bike... ;(

Misrah Balqis (27/4/2011)

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/226944_2043867814412_1175854753_4241505_5025047_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227798_2043868454428_1175854753_4241506_4030697_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/222165_2043869214447_1175854753_4241507_4031712_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/227703_2043869694459_1175854753_4241508_4695792_n.jpg

It hurts to see but let bygones br gone...

This shows that pulsar bike is not a normal bike... its a bike that bound with the rider.... but remeber that our faith is control by our individual god.... pls take care u guys!!! Ride Safe!!!

Edited May 18, 2011 by haktek

[alvinyansg]

Those interested to order protec products from me please list your names below with the items.

There will be NO shipping fees as it will be COD

Price is in USD$

When you pay me,pay me in USD$ then will pass the cash to my supplier in USD$

Easier for everyone.

If you guys prefer to pay in SGD$, do inform me here...I will do the conversion on the 12 May 2011(Thurs) using paypal's conversion rates(will be slightly higher than outside,to make it simple for all)

 

*Once order is made,NO cancellations allowed*

 

Prices:

Protec Ultimate V3 Ground $28.75/coil

Protec Ultimate V3 Ground (Pulsar 1 set coil,2 coils) $52.50

Protec Carspeed Edition Coil $56.25

Protec Air Filter $18.50

TDK Stabiliser $6

 

 

Closing Date: 11 May 2011(Wed)

 

 

Names:

1)

2)

3)

4)

5)

Edited May 6, 2011 by alvinyansg