[Group] Singapore BAJAJ Team (SBT)

[urabummer]

Thank you alvin, mj and oren! Thank you! Thank you! Haha

[Strawberrydonut]

strawberriesdonut .. yum yum but i don eat strawberries hihihh

 

don go to far extent thinking all the unnecessary things ...

 

first ... check ur idling rpm and adjust to 1.4 - 1.5k

2nd .. check ur spark plug if it loose .. tighten the plugs

3rd .. make sure the plug cap is tight on the cable .. just turn clockwise to tighten it

4th ... spray wd40 inside the plug cap before putting on teh cap back on the plug

5th .. check ur AF is not too dirty.. clean and dont cover anything on the mouth area ..

6th .. check the tank lid if got water traces on the drainage

 

btw wats spark plug u used n wat is the heat range .. see the number on the plug to know ..

 

let us know aafter all these done ... cheers

 

step 1 to 3 can be done,can i just check step no. 4 why must spray wd40? btw no worries i will tow it to UM once i get my pay which is still far i guess. just hope it won't cost a bomb i dunno how to check Air Filter so once again shall wait till pay comes hehe

[Strawberrydonut]

i just pondered upon this question could it be a dirty carb? coz previous owner ask me to wash carb as its dirty

[farhanians]

 

step 1 to 3 can be done,can i just check step no. 4 why must spray wd40? btw no worries i will tow it to UM once i get my pay which is still far i guess. just hope it won't cost a bomb i dunno how to check Air Filter so once again shall wait till pay comes hehe

there you go for the air filter how to locate. Remove. And clean if necessary (:

[StrongBow]

aiyoh .. ur post sound like blaming the front pad lah .. front got sound if ur rotor disc dirty or worn .. rotor easily to wear if using sinter (metal coated) pads .. organic worn faster but save tthe rotor ..

 

rear shoes normal easpecially using stock .. but even u used good shoes in due time it will make the sound too ..

 

hmmm like i posted long time ago .. just try to control ur braking and make the sound nice to hear same like violin lah .. you dunnow how to play the sound screeching also mah .. so just play the brake pedal and hopefully u can do a classical sound than all ears will be very pleaseeeeeeee .. kekekeke

 

Ooo iccc. Yeala. I've been trying to play beethoven symphony number 5 in c minor. But no luck. Sound more like dubstep. Hahahaha. Thanksss anyway

[mjbs64]

Ooo iccc. Yeala. I've been trying to play beethoven symphony number 5 in c minor. But no luck. Sound more like dubstep. Hahahaha. Thanksss anyway

 

if yngwie malmsteen can do it .. u can do ... kekekeke

[HVC]

FUTSAL EVENT - FRIDAY 25TH MAY

9-11PM

Kallang Cage

 

 

Come join us to have some fun !

Of course ALL are welcome ! Ex, pre, past, current, post, and even prospect Pulsarians are welcome to play !

If you play, it's $15 per player to cover field booking and super nice isotonic drinks.

If you don't want to play but want to support or make fun of the players and their poor stamina, then it's free !

 

Come join us, we'll go makan after that together and I'm sure we will have fun watching the games

This is a good opportunity for those who usually can't make it on BTWO to join us and meet other Pulsarians and fellow FZ16 riders

 

Al De Moto is an accessories and parts shop that sponsors the event : http://www.facebook.com/alde.moto

Pay them a visit and check out what they have on their shelves - they are 2 brothers who take good care of their customers and are supporting our 2B clubs.

 

So, who's game ????

(Only the Pulsarians are listed here, Fazerians are joining us but we gather their participation on Facebook)

 

Players:

01. Speedaddict

02. Alvin

03. Fredd

04. Fircyber

o5. Fiddy

06. Charlton

07. HVC

08.

09.

10.

 

 

Supporters:

01. O'Ren

02. Atipo

03.

04.

05.

06.

07.

.....

 

 

 

UPDATED..applied leave..80% chance i can go...On the 24th i can confirmed my 100%...I wanna play...its been a long time...i will give my best..although long time no play..super rusty...

 

How do i go about registering myself as a playaaaaa? Can i pay on 25th or need to pay in advance?

 

Btw, this wednesday got BTWO? if have MAYBE i can attend n Mamam(cute malay slang for makan=malay slang for eat= )....and i miss you guys!!!!! LOL

[HVC]

Mannnn...y'all can be Bajaj consultant already...so detailed in explanations of such simple things...im impressed and im proud of u guys...acquiring so much knowledge and given sweat and tears to get to know this bike in and out when many other people don't even mention its name when thinking of buying a bike...respect and salute...keep on going....i know i lack behind..i try to catch up as i said it before...hehehe....i treat u all teh tarik la one day!!!!! but u guys come out the money...hehehehe ...

[HVC]

Bike getting worst...now cone bearing gone...handle not only unstable but i can corner and really feel that my bike is dropping and i'm falling off....SINNOB hurryyyyyy!

[ORen]

@strawberry, wd40 is To waterproof the plug, avoid humidity to create rust or impact the ignition process.

 

The carburettor once cleaned will improve the overall performance of the bike especially on rpm above 5, and will help a more fluid and easy pick up. But that is not what causes the bike to stall unless its state is so bad it impacts the fuel travel or fuel/mixture.

 

If Tuesday evening you are free I can drop by to help you troubleshoot a few things. Let me know, even if it's late I can come as the next day I start work late in the morning so no problem.

[speedaddict]

HVC how do still u use your single seater?

Edited May 14, 2012 by speedaddict

[SC Gaban]

geli maaaaat! Geli mat! mat!mat!mat!mat!mat!

Edited May 14, 2012 by SC Gaban

[ORen]

Bike getting worst...now cone bearing gone...handle not only unstable but i can corner and really feel that my bike is dropping and i'm falling off....SINNOB hurryyyyyy!

 

For the Futsal can pay the day itself, glad you'll join us!

 

I can't remember when the cone bearing must be changed - haven't changed mine yet. How old is your bike in age and mileage ?

[HVC]

HVC how do still u use your single seater?

 

never use and i don't know where i put it...lol...

[HVC]

For the Futsal can pay the day itself, glad you'll join us!

 

I can't remember when the cone bearing must be changed - haven't changed mine yet. How old is your bike in age and mileage ?

 

....mine coming 25K...coming 2 years and a half...

[ORen]

....mine coming 25K...coming 2 years and a half...

 

Ok so almost like Shadow, 25k km, 2 years 2 months

Probably should change the cone bearing yep ! Haven't changed mine yet, mechs keep telling me I don't need to but I think next time I go for fork oil change and breake bleeding I'll change the cone as well.

Anyone knows how much the latter costs ?

[urabummer]

Sorry i'm not a pro on bikes and parts and so on. But i do remember asking UM on cone bearings because i was following the manual guidelines. Similarly ah tek turned the handlebars and said dont have to change. I asked what the price to change was, considering if it was cheap. The bearing itself is cheap. But if im not wrong he said there were a few in total and if i do want to change all of them including labor would make me $70+ poorer. In their own words, "this one ok la. You use the money can change other things". Haha. This was in january so i might recall wrongly.

[ORen]

Sorry i'm not a pro on bikes and parts and so on. But i do remember asking UM on cone bearings because i was following the manual guidelines. Similarly ah tek turned the handlebars and said dont have to change. I asked what the price to change was, considering if it was cheap. The bearing itself is cheap. But if im not wrong he said there were a few in total and if i do want to change all of them including labor would make me $70+ poorer. In their own words, "this one ok la. You use the money can change other things". Haha. This was in january so i might recall wrongly.

 

Thanks ! Seems pricey.. @mjbs64 you still have the receipt from when you changed yours, by any chance ?

@revhappy, how much would it cost if you could bring it from India ? Do you think you could organize an MO for the cone bearings seeing that we'd all need to change ours sooner or later, what say you ?

[revhappy]

Ok so almost like Shadow, 25k km, 2 years 2 months

Probably should change the cone bearing yep ! Haven't changed mine yet, mechs keep telling me I don't need to but I think next time I go for fork oil change and breake bleeding I'll change the cone as well.

Anyone knows how much the latter costs ?

 

Steering cone and bearings change cost about 75$ total(includes ~40$ labour)

[revhappy]

Thanks ! Seems pricey.. @mjbs64 you still have the receipt from when you changed yours, by any chance ?

@revhappy, how much would it cost if you could bring it from India ? Do you think you could organize an MO for the cone bearings seeing that we'd all need to change ours sooner or later, what say you ?

 

In India the steering cone bearings cost about 10$, i.e about 1/3rd SG price. So you save only about 20-25$. Its the labour that is killing 40$.

 

I am waiting to see when one of my colleagues is going to India next and is kind enough to bring parts with him

[mjbs64]

Thanks ! Seems pricey.. @mjbs64 you still have the receipt from when you changed yours, by any chance ?

@revhappy, how much would it cost if you could bring it from India ? Do you think you could organize an MO for the cone bearings seeing that we'd all need to change ours sooner or later, what say you ?

 

 

u can google : mjbs64 singapore bajaj team dot dot .. i learn this from rev happy jeng jeng jeng

[mjbs64]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

[mjbs64]

Steering cone and bearings change cost about 75$ total(includes ~40$ labour)

 

 

did you stalk again ??? .. jeng jeng jeng

[revhappy]

did you stalk again ??? .. jeng jeng jeng

 

Haha no la bro. Last time when I went to um, I got the quote from chris. In fact steering cone bearing servicing is a very common thing at um, everytime I go there I see a pulsar getting beheaded there

[m0bIlEnErD]

Steering cone can do outside also. No need to do at UM.