Kawasaki KRR150 Riders

[Snoek]

$200 ar? Malaysia $70RM (Labour fee), you think lei? keke...

Max aroud $250RM.. Singapore around $120 if plus makan and ciga and EXTRA services, just nice SG$200 bah.. lolx..

 

 

 

relax.. just ride up next and rev high and go off..

 

 

 

esimated $50? Malaysia around RM$60-$70 bah.. can't remember liaoz..

 

But reliable anot to service at JB ? Scared got many problems later.

 

today saw a pure white 28 outside cdc lols

 

So far no body ordered 28 from our forums.

 

Singapore have to find lei.. Why? You need to buy one ar? Go in JB to buy lor.. We "should" have a outing soon to JB bah.. I MIGHT be going in around March.. C how first..

 

 

 

How to adjust? Have to ask those more pros de.. I dun never adjust myself b4 YET..

 

2T intake More = More smoke = More prone to getting fine for excess smoke = Piston Better

2T intake less = Less Smoke = as above lesser = Dun rev too high else piston jammed..

 

Just my 2 cents...

 

I wana get a Volt meter from JB. lol.

 

according to my friend its best to go in the day coz u can see what they are doing.. at nite it gets difficult to see and sometimes might be unable to finish the job..

 

Aftnoon can do bike all e way till nite ma, somemore we so many ppl go must wait for everyone. Heard the new road nt nice liao leh.

[papermk]

they ish change new one for you wor....

 

change new one 35rm only ah, i see i see. ps ah i abit noob ahaha havnt do any servicing before since 4 mth bk. only valves. oso havnt ride into jb yet, just renew my passport today, monday can tk alr hahaha.

[chocolatejay]

yes i need to service my valves too..they will do it for us in the full servicing right??

[east76]

first time frenz bring me in jb. after that i normally i go jb alone in early afternoon for full servicing and it will take to 5-6hrs (depends bikes shop full house or not) if less i think by 3-4hrs can fininsh.it's true go afternoon is better coz we can see very clear wat they do to our bike.

[Kyrul]

why some people like to remove air box on their bike ? Meaning no air goes into the carburator ?? Bike will more powerful ?

 

 

 

bro remove air box means more air goes into carb n so does water n dirt..

normally ppl only do this for race pursoses.. betta use emptied air box

[Snoek]

bro remove air box means more air goes into carb n so does water n dirt..

normally ppl only do this for race pursoses.. betta use emptied air box

 

Yup, Im using a emptied air box also. But its still quite dirty leh.

 

By the way bro black_rockerz , your bubble very nice. I got think of doing this also.

[Snoek]

yes i need to service my valves too..they will do it for us in the full servicing right??

 

I tink so, since its full servicing le. But ask you all ar, you all won't scared Jb's quality of worksmanship nt gd enough ar?

[Xenox]

why scare? it's cheap.... sg same as here de la... see the motorbike shop in sg... half of them also from malaysia de.... u dun think too much ba...

[YEN96]

I tink so, since its full servicing le. But ask you all ar, you all won't scared Jb's quality of worksmanship nt gd enough ar?

 

bro, 1st of all, its your choice. Nobody force you to service your bike at any shop. Take a read of the review of JB shops / workmanship or ask any of the kr riders who service across the causeway. U decide for yourself after reviews u have gathered. Afterall, its your money. you can choose to dump your cash at a reputable local workshop or try at JB. Its through visiting the workshop ( local or JB ) , observe and ask the mechanic when he attends to your bike, then u decide if you trust the person.

 

And there is no such thing as JB having lousy workmanship or wat. Comparing singapore and JB/malaysia and thailand, in terms of modification and skills is in this order of 1st Thailand 2nd malaysia 3rd Singapore. For kr is a Thailand bike, no doubts about thailand. Malaysia has many Kr also even the old models, they close eye also can open your engine. Also, in local work shops, there are tonnes super many malaysian mechanic.

 

You decide for yourself !

 

Unless your kr is Ducati kr or R1-kr or GSXR1000K8-kr or MV agusta kr THEN I TELL U to be a bit scared @!

[sneezeoutsnot]

I tink so, since its full servicing le. But ask you all ar, you all won't scared Jb's quality of worksmanship nt gd enough ar?

 

hi nexon, is that white bike yours?

[atrophy]

eh u all goin in jb? let me know i also wanna go in do some stuff and yea do at kok seng. afternoon better, night might have to wait damn long..

[fireshamie]

eh u all goin in jb? let me know i also wanna go in do some stuff and yea do at kok seng. afternoon better, night might have to wait damn long..

 

helo guys! been busy w work n things tat i dun have time to log in..hehe..

 

anyways..when u guys going? go this weekend ah? afternoon weekday i work liao..i also wanna go..but was thinking i wait for my pay early next month then can go with u all to kok seng..

[chocolatejay]

yea lets go in early next month...ok ar..so on ar...i believe quite a number here noe how to get to kok seng so yea lets go in early march!!

[Jundeang]

yeah yeah yeah lets all go jam the causeway together xD piss everyone else off with a bunch of kr queueing up @ custom haha

[chocolatejay]

aight!!haha!!!they will be cursing and swearing alrite...haha..

[Jundeang]

yaya muz rmb 2t open bigger =x every 5 sec blow abit.. make causeway become genting!

[chocolatejay]

wah!!genting but so hot!!!lol!!! btw what engine oil u guys use???anyone got any good eo to recomend???

[adesmond2]

i also have to wait for march coz thats when money comes in and exams are over...btw how much does it cost to do a full service at kok seng and also decarbonise??

 

yeah.. same as me.. wait for march den go in because of Goverment $$$

 

ermm...u all goin at afternoon or at nite??? i'm onli free on sunday due to off day..

 

Weekdays Afternoon...

 

if at ah boy shop full servicing $120RM Carbornize $50RM piston ring $35RM...

 

ah Boy? to each shop when we arrived... so that we would not make the shop filled up...

 

eh march go jb i wan go too! rmb jio me go also haha

 

need someone to start up with a gathering plan...

 

if go in jb spray bike which shop good ah? if affordable maybe i spray rims also.

 

all shop alright, prices for rim is around $80RM, waiting time 6-8 hours..

 

oh nice info bro. piston ring is how they service?

 

take out your block and piston, wash finish, change your piston ring and fixed it back..

 

ya ya i wana spray rims and swing arm, whats the price ah.. shud be night go better right haha.

 

Rim $80RM swing Arm, quite ex.. forget the price liaoz.. estimate $80 as well?? Can't remember, sorry.. but expected to wait for 6-8 hours...

 

according to my friend its best to go in the day coz u can see what they are doing.. at nite it gets difficult to see and sometimes might be unable to finish the job..

 

that's wat I did EVERYTIME... I cannot trust my beloved bike to someone's else hands when I'm not around..

 

But reliable anot to service at JB ? Scared got many problems later.

 

I wana get a Volt meter from JB. lol.

 

Aftnoon can do bike all e way till nite ma, somemore we so many ppl go must wait for everyone. Heard the new road nt nice liao leh.

 

I tink so, since its full servicing le. But ask you all ar, you all won't scared Jb's quality of worksmanship nt gd enough ar?

 

depends on each of us here bah.. because of the BIG price diff, I would rather full service in JB.. So far so good.. Full service twice and my bike is running well for the past 1 year ++

 

Volt meter? They only have analog.. No digital ones..

 

haha.. Not very nice to ride.. turn left and right til ALMOST accident.. ask atrophy, I lead him in that time.. lolx..

 

change new one 35rm only ah, i see i see. ps ah i abit noob ahaha havnt do any servicing before since 4 mth bk. only valves. oso havnt ride into jb yet, just renew my passport today, monday can tk alr hahaha.

 

lolx.. den be prepared to go in with a bunch of us.. But i guess only 4-5 will turn up as some might not be able to make it due to some reasons de.. Cuz I that time tried alot of times.. Meet up, in the end, I went in alone.. lolx.. tell you wat, I race ALL THE WAY IN to AGL and ALL THE WAY BACK TO SINGAPORE, EVEN NO TIME TO PUMP PETROL, reason?

 

Those Malaysian travel in groups of 5-30 people... I only can Zooommm past them hoping they wun chase me.. simple as that..

 

yes i need to service my valves too..they will do it for us in the full servicing right??

 

yeah.. Full service ($80) consist of

 

1) Clean Block

2) Clean Piston

3) Clean valves

 

anything else you wan to change, have to add in the cost of the money itself... example:

 

4) EO - $20

5) Spark Plug - $5

6) Coolant - $5

 

About there bah.. Go and calculate yourself den..

 

why scare? it's cheap.... sg same as here de la... see the motorbike shop in sg... half of them also from malaysia de.... u dun think too much ba...

 

lolx.. that's how you should think...

 

eh u all goin in jb? let me know i also wanna go in do some stuff and yea do at kok seng. afternoon better, night might have to wait damn long..

 

sure... Will confirm inform you.. BUT if you in a rush.. better dun come..

*you get wat i meant...

 

helo guys! been busy w work n things tat i dun have time to log in..hehe..

 

anyways..when u guys going? go this weekend ah? afternoon weekday i work liao..i also wanna go..but was thinking i wait for my pay early next month then can go with u all to kok seng..

 

Sure bo?? Kok Seng is JB lei.. You can go in with your Passport??

 

yea lets go in early next month...ok ar..so on ar...i believe quite a number here noe how to get to kok seng so yea lets go in early march!!

 

whahaha... I guess really alot know how to go after one time.. now the way is much easier, just expressway all the way and turn right...

[atrophy]

yeah.. same as me.. wait for march den go in because of Goverment $$$

 

 

 

Weekdays Afternoon...

 

 

 

ah Boy? to each shop when we arrived... so that we would not make the shop filled up...

 

 

 

need someone to start up with a gathering plan...

 

 

 

all shop alright, prices for rim is around $80RM, waiting time 6-8 hours..

 

 

 

take out your block and piston, wash finish, change your piston ring and fixed it back..

 

 

 

Rim $80RM swing Arm, quite ex.. forget the price liaoz.. estimate $80 as well?? Can't remember, sorry.. but expected to wait for 6-8 hours...

 

 

 

that's wat I did EVERYTIME... I cannot trust my beloved bike to someone's else hands when I'm not around..

 

 

 

 

 

depends on each of us here bah.. because of the BIG price diff, I would rather full service in JB.. So far so good.. Full service twice and my bike is running well for the past 1 year ++

 

Volt meter? They only have analog.. No digital ones..

 

haha.. Not very nice to ride.. turn left and right til ALMOST accident.. ask atrophy, I lead him in that time.. lolx..

 

 

 

lolx.. den be prepared to go in with a bunch of us.. But i guess only 4-5 will turn up as some might not be able to make it due to some reasons de.. Cuz I that time tried alot of times.. Meet up, in the end, I went in alone.. lolx.. tell you wat, I race ALL THE WAY IN to AGL and ALL THE WAY BACK TO SINGAPORE, EVEN NO TIME TO PUMP PETROL, reason?

 

Those Malaysian travel in groups of 5-30 people... I only can Zooommm past them hoping they wun chase me.. simple as that..

 

 

 

yeah.. Full service ($80) consist of

 

1) Clean Block

2) Clean Piston

3) Clean valves

 

anything else you wan to change, have to add in the cost of the money itself... example:

 

4) EO - $20

5) Spark Plug - $5

6) Coolant - $5

 

About there bah.. Go and calculate yourself den..

 

 

 

lolx.. that's how you should think...

 

 

 

sure... Will confirm inform you.. BUT if you in a rush.. better dun come..

*you get wat i meant...

 

 

 

Sure bo?? Kok Seng is JB lei.. You can go in with your Passport??

 

 

 

whahaha... I guess really alot know how to go after one time.. now the way is much easier, just expressway all the way and turn right...

 

haha ya, this time I go ALONE. wait kena kpkb

[papermk]

oh desmond bro, thx for all ur replied to my queries. alright man, next week or early next mth lets go tgt ! hhaha.

[totie88]

Bros...i wanna full service too. or just decarbonise my pipe. yeaaah. Never been to jb. No frens to tag along dude... so it would be nice if i can like join u guys...

[papermk]

when they organise, we tag along !

and decarbonise endcan for what ah?

got use anot?

[east76]

kok seng,do they open in afternoon and wat time is thier operation hour?? wat i noe kok seng open at nite izit correct.i all along go at afternoon jb ah boy shop alone.AGL went once at nite 85% sg bikes..about servicing wise must see the mech mood,just be prepare wat they will tell u bout ur part piston,block...etc...worst to worst they ask u change parts (come out more money)sianz.just remind u guyz don't believe thier words too much.my frenz kana b4 at kok seng after full servicing on the way home b4 reach custom kana piston jam...one more thing is ''DON"T ACT yaya payaya'' front them or if not ur bike getting more problem.

[adesmond2]

oh desmond bro, thx for all ur replied to my queries. alright man, next week or early next mth lets go tgt ! hhaha.

 

lolx.. okok.. next month den.. I'll confirm again if someone plan the outing...

 

Bros...i wanna full service too. or just decarbonise my pipe. yeaaah. Never been to jb. No frens to tag along dude... so it would be nice if i can like join u guys...

 

lolx.. yeah.. waiting for someone to start the name list den..

 

when they organise, we tag along !

and decarbonise endcan for what ah?

got use anot?

 

Got.. less smoke and less 2T will drip from your pipe.. lolx..

 

kok seng,do they open in afternoon and wat time is thier operation hour?? wat i noe kok seng open at nite izit correct.i all along go at afternoon jb ah boy shop alone.AGL went once at nite 85% sg bikes..about servicing wise must see the mech mood,just be prepare wat they will tell u bout ur part piston,block...etc...worst to worst they ask u change parts (come out more money)sianz.just remind u guyz don't believe thier words too much.my frenz kana b4 at kok seng after full servicing on the way home b4 reach custom kana piston jam...one more thing is ''DON"T ACT yaya payaya'' front them or if not ur bike getting more problem.

 

3.30pm - 6am, Mon closed

lolx.. dun act.. just be normal and TREAT them NICE!!

Of cuz, I "normally" chat with the boss ONLY.. the mechs? Just crap abit can liaoz..

[Snoek]

hi nexon, is that white bike yours?

 

Which white bike ? SG alot white Kr also.

 

bro, 1st of all, its your choice. Nobody force you to service your bike at any shop. Take a read of the review of JB shops / workmanship or ask any of the kr riders who service across the causeway. U decide for yourself after reviews u have gathered. Afterall, its your money. you can choose to dump your cash at a reputable local workshop or try at JB. Its through visiting the workshop ( local or JB ) , observe and ask the mechanic when he attends to your bike, then u decide if you trust the person.

 

And there is no such thing as JB having lousy workmanship or wat. Comparing singapore and JB/malaysia and thailand, in terms of modification and skills is in this order of 1st Thailand 2nd malaysia 3rd Singapore. For kr is a Thailand bike, no doubts about thailand. Malaysia has many Kr also even the old models, they close eye also can open your engine. Also, in local work shops, there are tonnes super many malaysian mechanic.

 

You decide for yourself !

 

Unless your kr is Ducati kr or R1-kr or GSXR1000K8-kr or MV agusta kr THEN I TELL U to be a bit scared @!

 

Went in with my previous bike, do liao still got problem 1. SO naturally dun trsut them too much.

 

Ducati kr or R1-kr or GSXR1000K8-kr or MV agusta kr . LOL. oh i see.

 

kok seng,do they open in afternoon and wat time is thier operation hour?? wat i noe kok seng open at nite izit correct.i all along go at afternoon jb ah boy shop alone.AGL went once at nite 85% sg bikes..about servicing wise must see the mech mood,just be prepare wat they will tell u bout ur part piston,block...etc...worst to worst they ask u change parts (come out more money)sianz.just remind u guyz don't believe thier words too much.my frenz kana b4 at kok seng after full servicing on the way home b4 reach custom kana piston jam...one more thing is ''DON"T ACT yaya payaya'' front them or if not ur bike getting more problem.

 

Yah lor, gotto be humble at there. hehe