Jump to content
SingaporeBikes.com Telegram Now LIVE! Join NOW for the Last Reviews, News, Promotions & Offers in Singapore! ×
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

Recommended Posts

Posted (edited)
kit any idea what could be my prob? lol.

 

 

wat problem are u facing? gear 6 rpm 7 u travelling at 100??

 

if so.. i dun think its a prob lor.. cos different bike might perform different slightly from others.. maybe cos of ur sprocket size(which i suspect its the cause)? maybe u have not serviced for quite sometime? maybe also due to ur setting?

 

i cannot be sure for u also cos im still not pro enough.. hahaa..

 

anyway to let u noe.. my bike at gear 6 rpm 6.5, its going at slightly above 110.. its somewhere rpm 6.75 when im travelling at 120.. but im using teeth 39 for my rear sprocket..

Edited by tik
http://www.singaporebikes.com/forums/attachment.php?attachmentid=204784&d=1305883476http://www.singaporebikes.com/forums/attachment.php?attachmentid=277892
Posted
fri night... hmmmmm.. i think so im inside from 10 to 1plus like tat..

u saw my bike on which shop??

next time to confirm whether izit me.. look for a obvious 7letters black wording on the side of my tailboard can already.. ahhaaha..

 

anyway.. did all the problems start to occur AFTER u did the carb servicing and plug change?

 

I saw your bike i think a few shop below kok ping? park on the road side, until those car need to go slow2 so wont hit :lol:

 

This problem surfaced after the servicing. What happened was during my 2A at bbdc, got heavy rain. When i went to take my bike then this problem surface.

 

I just rode it to mac for breakfast a few mins ago, and the problem still persists zzz... :cry:

Good nature and honesty is often rewarded

Cheaters and liars are often compounded

karma watches, and remembers

Posted
wat problem are u facing? gear 6 rpm 7 u travelling at 100??

 

if so.. i dun think its a prob lor.. cos different bike might perform different slightly from others.. maybe cos of ur sprocket size(which i suspect its the cause)? maybe u have not serviced for quite sometime? maybe also due to ur setting?

 

i cannot be sure for u also cos im still not pro enough.. hahaa..

 

anyway to let u noe.. my bike at gear 6 rpm 6.5, its going at slightly above 110.. its somewhere rpm 6.75 when im travelling at 120.. but im using teeth 39 for my rear sprocket..

 

yeah i know but it use to travel at around 100km/h for gear 6 rpm6. under perform by so much? kinda weird. argh :(

 

servicing? spark plug changed less than a month. engine oil changed about a month back.

 

sprocket 39 at rpm 6.75 can 110km/h, then mine 7 then 100km/h. very big diff..

Posted
weird, got my revtec repaired all. jus felt it became smoother that's all. previously gear 6 rpm 6 can reach 100, now gear 6 rpm 7 then 100..

 

dunno isit i rem wrongly not.. but judging from my sprocket size 38, is it normal? or did i remember wrongly? lol

 

mine also 38 at the back. ur one abit weird..

wat problem are u facing? gear 6 rpm 7 u travelling at 100??

 

if so.. i dun think its a prob lor.. cos different bike might perform different slightly from others.. maybe cos of ur sprocket size(which i suspect its the cause)? maybe u have not serviced for quite sometime? maybe also due to ur setting?

 

i cannot be sure for u also cos im still not pro enough.. hahaa..

 

anyway to let u noe.. my bike at gear 6 rpm 6.5, its going at slightly above 110.. its somewhere rpm 6.75 when im travelling at 120.. but im using teeth 39 for my rear sprocket..

 

mine also same...abt 6.5 to 6.75 for 120km/hr...if hit rpm7 will go up to abt 130..

Don't dress for the ride.Dress for the crash.:thumb:

Posted
yeah that's why i think it's really weird.. hai. wonder anyone know the problem? could be clutch plates? i heard clutch plates last for couple of years tho

 

Also check your chain if its too loose it will also cause in less rpm->speed efficiency.

Good nature and honesty is often rewarded

Cheaters and liars are often compounded

karma watches, and remembers

Posted
mine also 38 at the back. ur one abit weird..

 

 

mine also same...abt 6.5 to 6.75 for 120km/hr...if hit rpm7 will go up to abt 130..

 

same here...

Good nature and honesty is often rewarded

Cheaters and liars are often compounded

karma watches, and remembers

Posted

Guys if anyone going jb(like 2-3ppl) call me along. Wanna fix this damn thing..... but if i dunno the reason behind it i scare ketok....

Good nature and honesty is often rewarded

Cheaters and liars are often compounded

karma watches, and remembers

Posted

boy did kelly clarkson eat too much or what?

 

 

but boy does she have some powerful vocals!

Don't dress for the ride.Dress for the crash.:thumb:

Posted
ok.. will sms you 1 week in advance.. :)

 

 

 

can.. buy your own piston there and change.. cheaper meh? if cheaper, tell me where to buy lei.. :D Piston rings also.. keke..

 

 

 

battery? have to see b4 we can determinate the exact problem.. where you stay?

 

 

 

lolx.. why wan to buy back a kr? lolx..

 

no lah!

just scare they give me fake piston only!

Posted
no lah!

just scare they give me fake piston only!

 

yup piston set at sg more cheaper... go to 'weda' n ask for ori piston.. whole set shuld cost arnd 70+

..RIDE TILL U OR UR RIDE DIE!..

 

http://i1094.photobucket.com/albums/i444/Khaikrr/FD603696-2E0E-45D4-A8C2-589696D78A13-18077-000004F071B84D33.jpg

 

Posted
I saw your bike i think a few shop below kok ping? park on the road side, until those car need to go slow2 so wont hit :lol:

 

This problem surfaced after the servicing. What happened was during my 2A at bbdc, got heavy rain. When i went to take my bike then this problem surface.

 

I just rode it to mac for breakfast a few mins ago, and the problem still persists zzz... :cry:

 

u try u from the oil on/off switch below got 1 cap,open see got water ?

last time my old bike alway got this problem

inside oil tanks got lot of water

clean carb 1 time no problem for few day only

then the same problem will cum again

if is like that

must clean the oil tank n cover when rain!

hope this can help u!

Posted
yup piston set at sg more cheaper... go to 'weda' n ask for ori piston.. whole set shuld cost arnd 70+

 

bro

so early wake up huh?

thks!

Posted
yeah that's why i think it's really weird.. hai. wonder anyone know the problem? could be clutch plates? i heard clutch plates last for couple of years tho

 

i just try liao!

near rpm 7,g6,120km

my also rear 38

abit never mind lah!

if clutch problem

u try see can feel slip clutch feel or not?

Posted
it's ok bro :D

 

 

 

lol... but i didnt change my sprocket.. weird. but same thing happen. speed reduce =/

I thought we've gone thru this already? ! You gained weight! :lol:

 

i think next year liao loh!

but this time must change piston liao!

can we buy piston set at sg, then when full service call then change to new one?

Can..Should be cheaper..But will depend on shop..Some will show you "black face" and charge you high labour costs..If change ownself even cheaper..Cut on the labour costs also..An at the same time..Get to know you bike inside out..:thumb:

 

Hi bros, have this recent prob with the kr. Have tried to trouble shoot the problem myself but cant determine the exact cause.

 

My kr keeps dying..

Note its warmed up properly(tho it also dies while i warm it up:dot:)

 

Symptoms:

KR dies at traffic light.

 

KR while riding will jerk forward repeatedly as if its almost gonna die(the jerk is those kind when your bike stall type).

 

KR will completely died while riding even on expressway. I will drop a gear to let it "push start" back to life...

 

 

 

I dont think its the idling as i tried setting to 1.8k and it will still die.

The way it dies is very sudden. As if you put to N gear, the engine will sound healthy then abrutly die, or it will have a few distinct almost die sounds n die.

If riding it will knock forward(like stall like that) fighting to stay alive, or it will die :sian::sian:

Read the PM I sent..;)

 

that's what the mech said. lol i dont know
I thinks its the speedo gear..The one that is on the left side of the front wheel..:p

09/07/2009 - Passed 2B TP (10th attempt)

 

I have tried to see things from your point of view..But no matter how hard I try..Or what I do..I just can't get my head that far up my butt..

Posted

hey guys..any one fix dynamax voltmeter or any voltmeter on their bike?

 

whats the normal gauge of the voltage for KR. heh.

 

feel like getting one but also not sure place which part of the bike...like no space liao..

2004-2009 Kawasaki KR150

2009 - 2015 Yamaha Fino

2015 - Honda PCX 150

Posted
hey guys..any one fix dynamax voltmeter or any voltmeter on their bike?

 

..

 

i fix before, readings wise i forget liao, but when bike idling should be 14V bah, got place to fix de

Yamaha RXZ, Kawasaki ZX KR150, Yamaha Spark135, Honda CB400 REVO NC42, Suzuki DRZ400SMK8, Aprilia RS125, Suzuki GSXR600K9, Honda RS150R

Click on the bike models for Information/Servicing/Maintenance on Kawasaki KR150, Honda CB400 Revo, Suzuki DRZ400SM and Suzuki GSXR

 

Facebook HONDA CB400 REVO

 

Can't post a new thread ?? Read HERE

 

SBF Garage Sales Act ---> Read HERE

Posted
i fix before, readings wise i forget liao, but when bike idling should be 14V bah, got place to fix de

 

ah thanks for the reply.maybe will get one...still thinking where to fix it which will look better.

2004-2009 Kawasaki KR150

2009 - 2015 Yamaha Fino

2015 - Honda PCX 150

Posted
yeah that's why i think it's really weird.. hai. wonder anyone know the problem? could be clutch plates? i heard clutch plates last for couple of years tho

 

yup.. clutch plates can last really long.. mine at least 2 years? or more.. I taken over for 2 years b4 decided to change.. :)

 

no lah!

just scare they give me fake piston only!

 

ooo.. okok.. so where got lobang to buy piston?

 

yup piston set at sg more cheaper... go to 'weda' n ask for ori piston.. whole set shuld cost arnd 70+

 

wow.. where's that? Can give exact location? I'll go and buy and change.. keke.. :)

 

u try u from the oil on/off switch below got 1 cap,open see got water ?

last time my old bike alway got this problem

inside oil tanks got lot of water

clean carb 1 time no problem for few day only

then the same problem will cum again

if is like that

must clean the oil tank n cover when rain!

hope this can help u!

 

another knowledge.. :)

 

hey guys..any one fix dynamax voltmeter or any voltmeter on their bike?

 

whats the normal gauge of the voltage for KR. heh.

 

feel like getting one but also not sure place which part of the bike...like no space liao..

 

12.0~12.4 *on ignition

12.4~13.0 *bike started

13.5 *charging* rev or on the run

max 15.2 ***diff bikes will go up max diff, cause of LEDs, light bulb brake lights and etc*** (min 13.5) will do.. :)

 

hey peeps, niwae im quite new here, sorry to bother u guyz, hmm just wondering, anyone of u krr-rians have a racing footrest and might wanna sell it? coz im looking for one... :)

 

how much you offering and wat colour you looking at?

 

BTW, NICE BIKE YOU HAVE THERE!!! :)

Kindly read thru at least the intro section first before decide to post any comments.... thanks... :cool:

 

Please proceed to this website/web link if you guys have any technical issues on Kawasaki Kips/KR150, I'll update the 1st POST as and when there's a new question. Newbies questions on the top as well. :)

 

 

 

http://www.singaporebikes.com/forums/showthread.php?p=6285055#post6285055

Posted

oh yea.. i got 1 hour to spare, i'm going to take pic of my beloved bike later.. lolx.. who else wan to come? sms me? lolx..

Kindly read thru at least the intro section first before decide to post any comments.... thanks... :cool:

 

Please proceed to this website/web link if you guys have any technical issues on Kawasaki Kips/KR150, I'll update the 1st POST as and when there's a new question. Newbies questions on the top as well. :)

 

 

 

http://www.singaporebikes.com/forums/showthread.php?p=6285055#post6285055

Posted
i just try liao!

near rpm 7,g6,120km

my also rear 38

abit never mind lah!

if clutch problem

u try see can feel slip clutch feel or not?

 

dunno slip clutch feel like what leh. never kana before lol.. think bring go my mech see.. ask him if i need to change..

 

where got abit! it's alot :(

 

I thought we've gone thru this already? ! You gained weight! :lol:

 

Can..Should be cheaper..But will depend on shop..Some will show you "black face" and charge you high labour costs..If change ownself even cheaper..Cut on the labour costs also..An at the same time..Get to know you bike inside out..:thumb:

 

Read the PM I sent..;)

 

I thinks its the speedo gear..The one that is on the left side of the front wheel..:p

 

lol i didnt gain weight :(

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...