Aprilia Riders

[tknge]

Thanks bro, mine has a whole lotta history behind its 2 years of me riding it. As for ushering me into the club, that's ok, do dispense with this ritual.

 

Do put the legacy SG Aprilians into perspective instead, as I will explain below.

 

I've seen and participated (albeit a little) the past Aprilia club that started way back in 2005, they were a dynamic group, most of their members participated in racetrack riding, etc.

They even had a forum at Aprilians.com; that's one of the ways they "hang out", socialised a lot and had lots of hands-on DIY articles like carb and power-valve cleaning, and the like.

 

I really learned a ton from them, as well as from reading up their articles. But now the chapter has ended, heard some of them upgraded, and the site closed down....now I guess guys like you compose the new generation of Aprilia riders, hope you guys can continue the legacy; the enthusiastic Aprilians as it was before.

 

I'm not sure about you and the current members hanging out in this thread but whether their existence has had direct influence in where you stand today. All the better if that influence had positive effects on you guys.

 

Cheers, ride safe on the roads, and stay upright!

 

I only get to know this web and previous close down web begining of the year. But I had been ride my aprilia from 1996 till now. From 1996~1999 is the best years of Aprilia where people can see how this bike can perform. I also not sure current members doing any hang out or not but still feel great that seeing people still interested in this bike. Hope that anyone still can hold on that, enjoy the ride and ride safe.

[macan_putih]

maybe i try to orgy some events for the ARC members..

but first i nid your guys support first... later i plan no one turn up

now been bz wit work n school.... even my sparing partner went to sepang already with his tyga pipe

[LittleLamb]

where do u gt those pic...??? cn gv me the link...???

http://img104.imageshack.us/img104/5612/p3rk2.jpg

 

Bro... Your bike don't look like RSW125 leh.. :giddy: :faint:

[ragnaphobia]

Bro... Your bike don't look like RSW125 leh.. :giddy: :faint:

 

bro, its RSW250

[redbeacon]

2005? i juz got my bike in Nov dat year.im trying to remember if i seen u ard or not.i know u rode aprilia b4

 

Bro, I think I might have seen you a few times passing by BP Ring Road. I do see this rider in stock coloured RVF sometimes with black protective riding jacket.

 

By the way, I used to ride a silver FR plater Aprilia RS125.

That bugger had just had its powervalve cable snapped and it's sitting there waiting for a new one. Meh...

 

I don't ride my RS125 that often nowadays, got myself a '400 as well and riding it often.

 

Oh, and for those who still need the DIY articles on carb cleaning/powervalve cleaning from that website, I have it archived as PDF on my computer.

[Guest asferi]

maybe i try to orgy some events for the ARC members..

but first i nid your guys support first... later i plan no one turn up

now been bz wit work n school.... even my sparing partner went to sepang already with his tyga pipe

 

wat to do...gt nth else so might as well try myself at sepang...

[macerena]

KNS..where got.no bike very decent nonsense

 

hEy iSa, chEck out tIs pIc maNz.. reMember it?? look at waYne's haIr!! haHa!! oMg!!!

[quikslvr]

hEy iSa, chEck out tIs pIc maNz.. reMember it?? look at waYne's haIr!! haHa!! oMg!!!

 

wah oldies man hahah..1st time go track 1st time fell down @ turn 3 hahah...u vets didnt teach me not to brake in gravel

[xcore]

any DIY session soon?

[macerena]

wah oldies man hahah..1st time go track 1st time fell down @ turn 3 hahah...u vets didnt teach me not to brake in gravel

 

haHa!!!! but tat session was fun and funny! I rem jie liang(who's in the background with cruz) sneaked into the track wif cruz's wave? hiLarious~!!

[lazernet]

Any aprilia riders in yishun?

[alanhim]

where's our president...??? so quiet... plan chalet 4 this year leh...

 

So sorry guys, busy with my baby now. Perhaps you guys can help me to plan with that. Let me know the detail and I will speak to MAH Boss for their fiancial support this year.

[alanhim]

hEy iSa, chEck out tIs pIc maNz.. reMember it?? look at waYne's haIr!! haHa!! oMg!!!

 

Really miss our last time track session together ........

[macerena]

Really miss our last time track session together ........

 

yAr i knOw, miss it too.. together wif wacko, wan23 and few others, mAn! it was a rioT! haHAhaa!!

[Sorrie4u]

hi guys...my rs125 got some probs...i went to workshop hua chin at bukit batok for service then the mech found that the bearing inside the engine is crushed...but i still can ride...gotta change the bearings and change speedo cable and clutch cable... anyone can tell mi wad is the price for the bearings? if only 1 is crushed need to change all? or jus 1 only?? urgent help needed..thanks alot... the mech says total will be a little less than 500 is that true? im in ns now...so gotta send my bike in on sunday and get it back next sat...sighhhhzzzz

[junkies_03]

hi guys...my rs125 got some probs...i went to workshop hua chin at bukit batok for service then the mech found that the bearing inside the engine is crushed...but i still can ride...gotta change the bearings and change speedo cable and clutch cable... anyone can tell mi wad is the price for the bearings? if only 1 is crushed need to change all? or jus 1 only?? urgent help needed..thanks alot... the mech says total will be a little less than 500 is that true? im in ns now...so gotta send my bike in on sunday and get it back next sat...sighhhhzzzz

 

bro if i,m not wrong,it,s not ur bearing problem as i came across tis problem before.it,s the balancing gear that broke.try and bring ur bike to First Motor workshop,@ubi industial(block 3006,ubi rd 1,#01-398) look for AhSeng the mechanic.he may solve ur problem.and i don,t tink u might need to change ur speedo cable etc.........

[Sorrie4u]

no bro...hua chin mech is quite good too... and he opened up the engine i checked myself the balancing gears its in gd condition like new....its the long stretch of gear stuff thats v hard to move compared to the same one a little back...so should be the ball bearings inside...at first we tot its the balancing gear too...but well its not...any one knows wad the price for the ball bearings?

[tangmulong4488]

just came back today from mah motor.

 

any bro knows what is this instrument holder FR, cost mi $160 most expensive item. total repair cost for buanging, $350...

[Sorrie4u]

wah alex u buang liao ah so fast? how serious was it? -.- carefull la...wad is instrument holder fr? anyone can tell mi the price for the bearings inside the engine crankshaft

?

[tangmulong4488]

wah alex u buang liao ah so fast? how serious was it? -.- carefull la...wad is instrument holder fr? anyone can tell mi the price for the bearings inside the engine crankshaft

?

 

nt very serious la...

i ask the lady she say is the front part blar blar blar, then i still don't understand...

bro yr bike why need to change bearings remember yr bike newer than mine and also mileage low low

[tangmulong4488]

i know what is instrument holder FR

it's the instrument that hold the front fairing.

[khoa9876]

hi bros, I'm in need of below 2nd parts good condition or brand new:

1/ Big bore cylinder Polini 154cc (new)/ full kit

2/ Orginal cylinder kit (2nd or new)

3/ Rear hugger

4/ Brake/ Clutch lever )2nd good condition)

5/ Carb (2nd 28mm 2006, good condition)

 

Please give me PM the price

[YoShiKi1605198827]

i know what is instrument holder FR

it's the instrument that hold the front fairing.

 

its the bracket that hold ur meters and front cowling . . .

[tangmulong4488]

its the bracket that hold ur meters and front cowling . . .

 

ok thank you... that item alone cost $160:faint:

 

nw the only problem left... is the scratches on the fairings... feel like spraying plain red...

[tknge]

hi guys...my rs125 got some probs...i went to workshop hua chin at bukit batok for service then the mech found that the bearing inside the engine is crushed...but i still can ride...gotta change the bearings and change speedo cable and clutch cable... anyone can tell mi wad is the price for the bearings? if only 1 is crushed need to change all? or jus 1 only?? urgent help needed..thanks alot... the mech says total will be a little less than 500 is that true? im in ns now...so gotta send my bike in on sunday and get it back next sat...sighhhhzzzz

 

Alone the crankshaft bearing there are 2 pcs it cost less than $100. If gear box bearings after cost less than $100. If you dismantle engine, all gaskets will need to change too. Normally, all oil seals change together is better as some time when they knocking out the crankcase & bearing, they might damage them too. Alone material cost should not cost more than $300. Remaining depend how bike shop want to charge you the labour cost. You can go ideal motor check the price, they will give you exact value.