SBF Silverwings / HOM Cafe 2012

[scoobydoo]

skipping today, decided to stay home and try reconstruct the headlights' sub-wire tonight, bike left there too long liow

[MaIkEr]

per the quick fix suggestion, swap over the hi and lo beam pin terminals at the left handle bar control connector. hi beam switch is now for low beam. no need cut wires or whatsoever. you prob need something sharp n fine to extract the pin terminal.

also can connect 1 wire from cig socket+ to bulb+

have you done continuity check to trace the faulty wire?

[scoobydoo]

going to down the head cowl and trace the faulty wire this evening.

 

i have a first suspect to investigate for this problem... bypass circuit for the low beam on-off switch.

if problem is due to the splicing becoming loose, then ho say liow... i'll just have to solder it on properly this time.

the mech reconstructing my scoob's head few years back could have used the easy but less secure splice-n-tape method

 

btw, i have bought the same butane gas soldering iron set you posted. went through all 3 levels and found the best price at the basement shop you mentioned

 

http://i692.photobucket.com/albums/vv287/josephsbs/Silverwing/SWMod-Switches1.jpg

[anodise57]

going to down the head cowl and trace the faulty wire this evening.

 

i have a first suspect to investigate for this problem... bypass circuit for the low beam on-off switch.

if problem is due to the splicing becoming loose, then ho say liow... i'll just have to solder it on properly this time.

the mech reconstructing my scoob's head few years back could have used the easy but less secure splice-n-tape method

 

btw, i have bought the same butane gas soldering iron set you posted. went through all 3 levels and found the best price at the basement shop you mentioned

 

http://i692.photobucket.com/albums/vv287/josephsbs/Silverwing/SWMod-Switches1.jpg

 

 

Need new wireharness ... u know who to look for.. hahaha

[SW9000]

Wooot. Going to ACM now.

 

Might be able to visit Club House if finish early. Yeah.

[Atlantic 200]

Wooot. Going to ACM now.

 

Might be able to visit Club House if finish early. Yeah.

 

Tonight many of us not coming, posted in HOM chat.

 

Sent from my SM-N9005 using Tapatalk

[Atlantic 200]

Bah Kut Teh + Indah..... (09/11/2013 - Sat)

 

8am.

 

JB Shell.

 

Quotes from HOM "See you when I see you."

[echris108]

hi,scoobye.have u check the bluewhite wire?

links start switch to light source.

mine problem links to that as i just did my troubleshooting.

[SW9000]

I see whether today got time to go change tires boh.

If complete by today then tomorrow I see you when I see you.

 

 

Bah Kut Teh + Indah..... (09/11/2013 - Sat)

 

8am.

 

JB Shell.

 

Quotes from HOM "See you when I see you."

[jsilverwing]

Maybe going indah after 10+am.

[scoobydoo]

hi,scoobye.have u check the bluewhite wire?

links start switch to light source.

mine problem links to that as i just did my troubleshooting.

not yet... busy at in laws place yesterday

thanks for the info

[scoobydoo]

just saw an interesting gadget... "glue" an IP cam to a home plug = HIPC700

 

http://www.aztech.com/sg/images/Products/IpCam/HIPC700_chart.jpg

[echris108]

not yet... busy at in laws place yesterday

thanks for the info

 

Confirm my problem is with starter switch.

The starter switch will disconnect the light power when starting.

My contacts at the switch is no good.

[scoobydoo]

have dedicated tomorrow to do the troubleshooting... hope no more last minute things crop up

[Lau Teck Seng]

Hi Scoobydoo, may i know you gas soldering iron set where to buy?

[Lau Teck Seng]

going to down the head cowl and trace the faulty wire this evening.

 

i have a first suspect to investigate for this problem... bypass circuit for the low beam on-off switch.

if problem is due to the splicing becoming loose, then ho say liow... i'll just have to solder it on properly this time.

the mech reconstructing my scoob's head few years back could have used the easy but less secure splice-n-tape method

 

btw, i have bought the same butane gas soldering iron set you posted. went through all 3 levels and found the best price at the basement shop you mentioned

 

http://i692.photobucket.com/albums/vv287/josephsbs/Silverwing/SWMod-Switches1.jpg

 

good to hear that!

[Lau Teck Seng]

u mean red light bar at the rear?shldnt be problem cuz nowsaday even box also have extra brake light right?

 

 

Thank you Echris108. then will install this weekend.

[echris108]

Thank you Echris108. then will install this weekend.

 

np,i am going to convert my brake lights on my box to leds and may add extra red lights too.

[scoobydoo]

Hi Scoobydoo, may i know you gas soldering iron set where to buy?

Sim Lim Tower basement ... $48.50

[scoobydoo]

np,i am going to convert my brake lights on my box to leds and may add extra red lights too.

I did that too, replaced my maxia's original led lights with 3 strips of much brighter 5050 LED strips plus a relay to make it blink when activated.

In case some on the ball inspectors may not pass the blinking lights during annual inspection, I always disable the lights before going

[scoobydoo]

Yippee ... found the problem liow, it's the bypass switch kaput. just need to connect back to stock setup can liow. will do that after lunch.

 

Next is to troubleshoot hazard light, only 1 side blinking. maybe something loose again

[SW9000]

If no more takers for last room at Hatyai for 16-18 Nov, I'll delete by Tomorrow night.

[lwkjason]

Hi all,

 

Are you looking for keychains to match your ride? hurry down to Assorted Accessories SG to look for a matching keychains!! we have keychains for many brands and models.

 

Visit:

 

SBF: http://www.singaporebikes.com/forums/showthread.php/407669-Assorted-Accessories-SG-Major-Brands-Keychains-available-*Yamaha*Honda*BMW*Ducati*?highlight=

 

Facebook: https://www.facebook.com/assortedaccessoriessg

 

Enjoy online shopping without any additional charges for standard mail delivery!! YES we provide **FREE STANDARD MAIL DELIVERY**!!

 

All are while stock last.

[scoobydoo]

headlight problem solved

[Lau Teck Seng]

np,i am going to convert my brake lights on my box to leds and may add extra red lights too.

 

nice one.