[Discussion] Super Four General Enquiry Thread

[outspoken]

Double post

Edited December 24, 2010 by outspoken

[azman ibrahim]

thanks...just change maxima engine oil.....u can just go to onemotoring.com.sg and click on the enquire transfer fee..type ur bike no then got come out the details

 

thanks alot man!

[outspoken]

Hi guys..need help to rectified my bike issue...i suspect my bike is having a problem but now different people is giving different comments...1)one fellow forum inform that my bike is having clutch plate housing issue...but when i went back to the bike shop (just took out last week)..2)the mechanic told me that the sound is normal....some belt or something like dat...once engine gets hot..then sound will go away....today while riding for 15min still can heard the same sound again....now the sound sometime comes and goes,even when its hot....3)fren who used to ride a super4 suspect that my clutch plate and spring or something is going to worn out so dats y the sound comes and goes (couldnt get the sound when he trying to see whats the problem)..

 

Anyone ever encountered this problem before?....i dun think i want to go back to the bike shop until i know whats the problem....no use all mechanic will say its normal...or something else....

 

Btw i also need to know...how much does the clutch plate assembly cost?..any idea?

[tiku]

Hi guys..need help to rectified my bike issue...i suspect my bike is having a problem but now different people is giving different comments...1)one fellow forum inform that my bike is having clutch plate housing issue...but when i went back to the bike shop (just took out last week)..2)the mechanic told me that the sound is normal....some belt or something like dat...once engine gets hot..then sound will go away....today while riding for 15min still can heard the same sound again....now the sound sometime comes and goes,even when its hot....3)fren who used to ride a super4 suspect that my clutch plate and spring or something is going to worn out so dats y the sound comes and goes (couldnt get the sound when he trying to see whats the problem)..

 

Anyone ever encountered this problem before?....i dun think i want to go back to the bike shop until i know whats the problem....no use all mechanic will say its normal...or something else....

 

Btw i also need to know...how much does the clutch plate assembly cost?..any idea?

 

whr did u ask ques regarding ur sound? the prevoius only shw u asking for eo thingy... perharps u wanna make things easier? if u really worry bout ur sound, i suggest u ride down to ah pek hse(make an appointment wif him).. i nt sure hw u gona let him hear the sound cos most the time souind appears during warmup time... after tt sound almost gone..

[outspoken]

whr did u ask ques regarding ur sound? the prevoius only shw u asking for eo thingy... perharps u wanna make things easier? if u really worry bout ur sound, i suggest u ride down to ah pek hse(make an appointment wif him).. i nt sure hw u gona let him hear the sound cos most the time souind appears during warmup time... after tt sound almost gone..

 

Bro,if this is not the place to ask questions..then let me know where to ask....previous engine oil post have already been answered...

perhaps i want to make things easier???...i dun understand what u mean....am i making things hard for u and everyone else?....Please do not get offended......im a newbie to the bike so its only normal to ask a lot of question..i'm only asking for feedback to my questions...No obligations if you dun wish to respond to my queries and i thank you for giving ur suggestion...

 

Btw Bro Ah Pek had already PM me and give this contact no...im just waiting to see what other people comment before i go and seek help with Bro Ah Pek.

[rockeuez]

Bros need Yr help,

 

Recently I just change my sprocket n chain at a bike, but when I ride my bike now,I can hear a sound. But the sound I'm facing now is only half bad as like the chain is loose. But I did observe that e mech tigthen e chain.

 

My sprocket is just a normal no brand..with did x ring.

 

Hope u all can help,I'm worried..as this had nv happen after changing sprocket n chain.

 

Thank u.

[Ah Pek]

Bros need Yr help,

 

Recently I just change my sprocket n chain at a bike, but when I ride my bike now,I can hear a sound. But the sound I'm facing now is only half bad as like the chain is loose. But I did observe that e mech tigthen e chain.

 

My sprocket is just a normal no brand..with did x ring.

 

Hope u all can help,I'm worried..as this had nv happen after changing sprocket n chain.

 

Thank u.

 

Why don't u go back to the bike shop and let them know. From what you said here..its a bad alignment or chain too tight adjustment job.

[Fazli]

Yupz... That's what I told him too.

[fella]

have u check your caliper screw? I've encounter this before and d caliper screw are loose

[rockeuez]

http://img593.imageshack.us/img593/5523/26689226.th.jpg

 

http://img266.imageshack.us/img266/4517/76923072.th.jpg

 

Bros, do you all know wher to buy the rubber support to keep my box upright? i tried to D.I.Y by using electrical cables but still break off..i ask a few bike shop but they said they dnt sell just the rubber support.

 

does Givi shop sell? any1 know where is givi shop in singapore?

 

need help badly

[rockeuez]

have u check your caliper screw? I've encounter this before and d caliper screw are loose

 

Bro,wher is e caliper screw u mention?

[Aneng]

Hi ppls, need some help and advise regarding servicing matters.. My spec III is due for servicing already and this will be my first servicing as I just got it from the shop bout 3mths ago.. Things tat bother me is tat my total mileage has already reach 80K.. So is there any specific kind of servicing tat I should do to my bike? Any recommendations?!? Thanx ya...

[hotrempit]

Urgent.Any1 selling 2nd hand Spec2 original Speedometer?

PM me.Thanks!

[Nasser]

Anyone know where to get headlight protector for s4?? To prevent frm hitting stone n rocks..

[pyro13]

look for rabbit in the cmo thread.. he has headlight protector for sale

[Fazli]

Hi ppls, need some help and advise regarding servicing matters.. My spec III is due for servicing already and this will be my first servicing as I just got it from the shop bout 3mths ago.. Things tat bother me is tat my total mileage has already reach 80K.. So is there any specific kind of servicing tat I should do to my bike? Any recommendations?!? Thanx ya...

 

Since you just got it from shop, check your calipers & brake pads, carburettors, chain & sprocket, coolant, brake fluids, tyres, air filter, front & rear suspensions, wheel & steering bearings, engine oil and spark plugs.

[Fazli]

Hi ppls, need some help and advise regarding servicing matters.. My spec III is due for servicing already and this will be my first servicing as I just got it from the shop bout 3mths ago.. Things tat bother me is tat my total mileage has already reach 80K.. So is there any specific kind of servicing tat I should do to my bike? Any recommendations?!? Thanx ya...

 

Since you just got it from shop, check your calipers & brake pads, carburettors, chain & sprocket, coolant, brake fluids, tyres, air filter, front & rear suspensions, wheel & steering bearings, engine oil and spark plugs.

[Nasser]

look for rabbit in the cmo thread.. he has headlight protector for sale

 

His protector got cb400 engrave.. If can Im looking for a plain n clear.. Thx:)

[warrior.c.o.n.p]

hi guys, my ride is about 4 yrs+ & still hvn't yet service my carb. i dun exp any slow acceleration, fuel clogged or etc. do i still need to service my carb??? or shuld i get it done???

[LoudnessFz]

any of u guys using fireblade handlebar?or do u have any idea how much it costs?

[pyro13]

any of u guys using fireblade handlebar?or do u have any idea how much it costs?

 

Cbr400 handlebars are clip ons.. Ours is clamp.. I tink mus nod sumting rite??

[pyro13]

hi guys, my ride is about 4 yrs+ & still hvn't yet service my carb. i dun exp any slow acceleration, fuel clogged or etc. do i still need to service my carb??? or shuld i get it done???

 

I wouldnt touch it if u ask me. Everytime i service my airfilter.. I abit worried my fc will suffer.. Nuch less d carb!

 

Ah chong of planet will sure tell u "still can use, just use"

[warrior.c.o.n.p]

I wouldnt touch it if u ask me. Everytime i service my airfilter.. I abit worried my fc will suffer.. Nuch less d carb!

 

Ah chong of planet will sure tell u "still can use, just use"

 

if tht so, i'm not going to touch it anyway. thnks ya. r u using knn airfilter??? can it wash with water or the treatment itself??

[Fazli]

I'm in urgent need to replace my rear wheel bearings and dust cover. Anyone have any idea which shop opens today or tomorrow?

[LoudnessFz]

Cbr400 handlebars are clip ons.. Ours is clamp.. I tink mus nod sumting rite??

 

nope...i saw my fren using...he just lower the fork till its enough for the handlebars to clip on..i feel the position more 'fierce' le..heheh..its like u can hug the tank