[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[Huatster888]

ah pek ur normal speed is 160km/h wat....

 

aiyah dun shoot him lah....his 160 i tink also long time once nia......ahahaha

[kano]

aiyah dun shoot him lah....his 160 i tink also long time once nia......ahahaha

 

raining also that speed

power!!!

[Ah Pek]

ah pek ur normal speed is 160km/h wat....

 

Eh hallo friend...don't anyhow say lay.. But I do lah..is only for testing..its 180km/hr...

[Ah Pek]

raining also that speed

power!!!

 

Many ppl don't know my tires got metal spike installed. Come out only when it detect road wet...heee..x2!

[hanxx]

For those who ask what shop it is,have pmed you.

too sensitive to share openly here.

 

DONT GO DO THIS BLACK MOTORTIAM!!!SCAM!!!

[greenruby79]

Ah Pek....a BIG tx for the grounding work you have done to my PB1 just now. Now it got better respond than b4. Try try abit otw back from your place just now. Reaching above 100km/h now is a breeze.....yipee!!! Also tx for checking out my bike and giving me some usefull tips. Can't wait to try the 2nd stage from you Ah Pek. Its also nice to meet a couple of S4 rider at your place.

 

Thanks alot Ah Pek....Cheers

[rockoil]

Yes..rebuilding it after that is just like new. The set of suspension would be totally dismantled inindividual pieces, bad rubber damper be replaced, canister be refilled with nitrogen gas, rebound spacer for spring be added, old dampering oil be drained and washed off and refilled with new content..seal and whatever bad be replaced..all in including workmanship is at $240. Don't send to mototiam..they will qoute cheaper but the same person be doing it and you won't get what is of quality if you send direct to David at Teck Thye.

 

For your brake caliper problem..go to Ah Fook..he has to see what the actual problem is, checking is free and he will advise you according..do or never do never mind one lah..and not to worry..he don't carry parang..if have, its just a 1 inch pen knife lah.....but do say I send you there..or tell me when you going and see if I can accompany you to do the talking.

 

Hi Pek,

 

Thanks for all the recommendation. Will go Teck Thye first to do my showa.

As i had only service my brake system last week, will monitor first. If really still spongy will go to Ah Fook. Btw, you have the number for both of the shops?

 

I am seen many of the bros here visit you to do some mods to the ride. May i know what service you are providing? i maybe interested too.

 

thanks a lot!!!!

Edited February 1, 2010 by rockoil

[Ah Pek]

Hi Pek,

 

Thanks for all the recommendation. Will go Teck Thye first to do my showa.

As i had only service my brake system last week, will monitor first. If really still spongy will go to Ah Fook. Btw, you have the number for both of the shops?

 

I am seen many of the bros here visit you to do some mods to the ride. May i know what service you are providing? i maybe interested too.

 

thanks a lot!!!!

 

Teck Thye - David - 98178791 (open at 12:00 noon)

 

Ah Fook : 92978058 (open 9.00 am to 8.00 pm..speaks mandarine and malay..english like tarzan)

 

Mod to bike?...no lah. Something that brings old bikes to "live" again..takig care of electrical load and eo ginseng.

 

All the performance you want a new bike can offer in an old bike.."liquid engineering without spending on hardware..and keeping it healthy as long as it can last..something like "Viagra" for your old iron horse lah..no modification..

[rockoil]

Teck Thye - David - 98178791 (open at 12:00 noon)

 

Ah Fook : 92978058 (open 9.00 am to 8.00 pm..speaks mandarine and malay..english like tarzan)

 

Mod to bike?...no lah. Something that brings old bikes to "live" again..takig care of electrical load and eo ginseng.

 

All the performance you want a new bike can offer in an old bike.."liquid engineering without spending on hardware..and keeping it healthy as long as it can last..something like "Viagra" for your old iron horse lah..no modification..

 

Hi Pek,

 

Thanks for the prompt reply.

Had saved both number already.

 

Oh, Viagra.... Guess the bike can wheelie like "siao" lor.

kekekekekeke

 

Thanks again...

[NGDEQUAN]

Morning....

 

I looking for version R windscreen..

 

Anybody got lobang for this... 2nd hand also can... pls pm me..

 

Cheers

[rcck013]

For those who ask what shop it is,have pmed you.

too sensitive to share openly here.

 

DONT GO DO THIS BLACK MOTORTIAM!!!SCAM!!!

 

Hey Bro,

 

Can you PM me the shop name too?

This kind of shop should be closed down. Need to be taught a lesson. We S4 riders should share info, so others won't be kanna chop chop. If no S4 riders go to him, hopefully he wake up. If not, no business, sure closed down.

 

Thanks .

[Dimac]

guys, juz fixed my ver s with yoshi full system. is it normal that the fc shoots up quite drastically?

 

yes of course, especially full system.

 

yeah my guess is the end can also.

what do you mean by jet set not standard?lol:angel:

 

it could be ur jetting. means before this the owner got change the jetting of the carb which enables more petrol to go down to the carb to make it faster. they changed to a bigger jetting. u might wana check on those jetting for ur fc, it could be the main reason.i've been reading ur post about fc so maybe the jetting is the main problem?

 

For those who ask what shop it is,have pmed you.

too sensitive to share openly here.

 

DONT GO DO THIS BLACK MOTORTIAM!!!SCAM!!!

 

i would like to know also.

[lfc131]

For those who ask what shop it is,have pmed you.

too sensitive to share openly here.

 

DONT GO DO THIS BLACK MOTORTIAM!!!SCAM!!!

 

hanxx, What shop eh?

[lfc131]

AhPek issit safe to use the 100w bulb?

[hanxx]

hey bro,the jetting set do you mean the carb needle?

so let say i change to standard needle my fc will be okay?

thanks alot:angel:

 

yes of course, especially full system.

 

 

 

it could be ur jetting. means before this the owner got change the jetting of the carb which enables more petrol to go down to the carb to make it faster. they changed to a bigger jetting. u might wana check on those jetting for ur fc, it could be the main reason.i've been reading ur post about fc so maybe the jetting is the main problem?

 

 

 

i would like to know also.

[hanxx]

hanxx, What shop eh?

 

PMED!

 

dont ever go there!SCAM!

Edited February 2, 2010 by hanxx

[Ah Pek]

AhPek issit safe to use the 100w bulb?

 

NOT RECOMMENDED!

[Ah Pek]

Ah Pek....a BIG tx for the grounding work you have done to my PB1 just now. Now it got better respond than b4. Try try abit otw back from your place just now. Reaching above 100km/h now is a breeze.....yipee!!! Also tx for checking out my bike and giving me some usefull tips. Can't wait to try the 2nd stage from you Ah Pek. Its also nice to meet a couple of S4 rider at your place.

 

Thanks alot Ah Pek....Cheers

 

Yoi!...enjoy my friend but don't stress the gears..u know what's not in there yet

[sihan0110]

PMED!

 

dont ever go there!SCAM!

 

pm me the shop also . thanks

[Huatster888]

hey bro,the jetting set do you mean the carb needle?

so let say i change to standard needle my fc will be okay?

thanks alot:angel:

 

yes yes.....set it back to original jetting can liao.....confrim will be better.....

[stRobe]

Anyone knows which shop can change the speedo/rpm backlights? Or can diy? Think my backlights blown liao, cannot see at night.

[brandon.]

Anyone knows which shop can change the speedo/rpm backlights? Or can diy? Think my backlights blown liao, cannot see at night.

 

Yep! i also want to change white bright led lights for the speedo/rpm.

 

Thanks!

[zacko]

Hi Guys,

Am planning to do up my versionS back to its old glory days.Since i have been out of the scene for quite a while(8years to be exect),i need some feedback on where i can do or buy some of the stuff which i require.Below is the list.If possible could you guys also let me know the approx pricing.

 

1-Givi Rack

 

2-Ori Handlebar & Clamp(Now using Fatbar,damm uncomfortable)

 

3-PB1 header

 

4-windshield or RD350 light mask

 

5-Led lights for meter

 

6-Front & Rear tyres

 

7-End Can

 

So far,this i have in my list.Mostly is cosmetic upgrades only.Thanks in advance for all the suggestion and feedback.

 

 

Cheers........

[stRobe]

6-Front & Rear tyres

Go unique motorsports (can check advertisers board on sbf for brands and prices b4 going down) or hkl; usually got fresh stock. pricing everywhere almost the same

7-End Can

 

Why not get 2nd hand from garage sales section? im using 2nd hand gpr end can and satisfied with it so far. performance really no diff, thats why some pple say no point changing. but i like the sound!

[muhammadnoorman]

hai guys, new rider to S4 Ver S.. need to know:

1) wad is top service?

2) how much does a full overhaul cost?

3) can a vtec footrest be fitted on a Ver S?

4) Wants to fix a mainstand, is it possible? if so, where can i do it? and the cost?

that is all for now.. thank you.. much more to learn from this forum..