[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[Hondaman]

Got a 2 prob wif my ver s. I discovered my bike engine block have to small hole and it leaks engine oil and green liquid on the left which i presume its coolen. No 2. yesterday i DIY change oil pan gasket but it still leaks,now i headache already. Dunno which one is the prob...so bros can tell me wats going on wif my bike...yur help really much appreciated....

 

If coolent come out from hole that means there is either crack or leak in your block. Bring to mech to check. To the mech you trust. not the ones that burn ur pocket. Either they can skimmed it or suay have to change it. that one really burns. unless you can get a 2nd hand block at any scrap shop.

[Hondaman]

WAH WAH WAH... gambar baru nampakk...

 

Wah Wah Wah...hehehehe

[Marcheline]

Hondaman! Back from Penang eh? What tyres did you use for your tour? Hero sia you.. No box, just secure everything with nets and a tankbag. Any probs with your bike along the way?

 

Tank heat bearable? Your bike looks pristine in that picture.

[I_Ride_A_Bike]

When is the next meeting?

 

meeting later after 8 at same place teckghee area market open air tables...

 

do come if you can make it!

[Hondaman]

Hondaman! Back from Penang eh? What tyres did you use for your tour? Hero sia you.. No box, just secure everything with nets and a tankbag. Any probs with your bike along the way?

 

Tank heat bearable? Your bike looks pristine in that picture.

 

I use BT039. So far so Good. to KL in October. Now Penang and still the tyre very good.

 

Yeah, have to use Spider Straps. My bag damn heavy that my frens laugh at me coz when I carry it my arm trembles. lol. Thus my Gazi suspension also dunno why damn sux very soft that when go over uneven road, my rear will hit.

 

So far no problem. Except for Clutch Slippage. but that I think is my blunder to change gear softly thus I think the Gear drop down again.

 

At first the heat at the engine like buay tahan ah. Felt like wanting to jump at any river to cool off. hahaha. But when got used to it, its not that heat anymore.

 

I agree to what Ah Pek said that Honda Engine if Heat up will perform well. The bike does perform well when its totally heat up.

 

Next month gg to Melaka. I think la if my Leave Approved

[xkissx]

Now if you go after 1am also its still jam. sheesh. best is 2nd link lor then return by 1st link.

 

 

haha if go in 2nd link have to pay liao.. haha heard the new rule must bring ic go in... haha

[Hondaman]

Yeah. No more Cheap petrol.... haiz

[syarif]

eh guys, would u recommend a gpr pipe? coz i wanna pipe that gives off deep bassy tone. i dun mind abt the performance actually. any advice?

[syarif]

I use BT039. So far so Good. to KL in October. Now Penang and still the tyre very good.

 

Yeah, have to use Spider Straps. My bag damn heavy that my frens laugh at me coz when I carry it my arm trembles. lol. Thus my Gazi suspension also dunno why damn sux very soft that when go over uneven road, my rear will hit.

 

So far no problem. Except for Clutch Slippage. but that I think is my blunder to change gear softly thus I think the Gear drop down again.

 

At first the heat at the engine like buay tahan ah. Felt like wanting to jump at any river to cool off. hahaha. But when got used to it, its not that heat anymore.

 

I agree to what Ah Pek said that Honda Engine if Heat up will perform well. The bike does perform well when its totally heat up.

 

Next month gg to Melaka. I think la if my Leave Approved

 

eh i forget ask u laa.. does mental preparation plays a major part? kat tak penat ke? aku drive with my family stakat gi melaka jer dah mcm nak mangkok, wat more penang mann

[Hondaman]

meeting later after 8 at same place teckghee area market open air tables...

 

do come if you can make it!

 

2nite eh...i'll try to make it then.

[Hondaman]

eh guys, would u recommend a gpr pipe? coz i wanna pipe that gives off deep bassy tone. i dun mind abt the performance actually. any advice?

 

Better get the one with the performance lah. Actually if u operate ur original pipe to the point that its still legal. it also can give better performance.

 

GPR...hmmm. As what I know got performace ah but many gave bad reviews la. dunno why. But as in Bassy, it wont be in the first place. but after a while then the sound will come.

 

LV as I know, not bassy unless u took out the Silencer. Which is super bassy. My fren LV pipe can be heard quite far. Dammit I jeles. but come back singapore, have to put back the silencer. Performance is good.

 

Yoshi, as personally use. It does sound bassy when put in a non-vtec. Now after came back penang, its more super bassy lei. hahaha. I think due to the carbon burned. If TP tahan me say if its illegal. I dunno who to explained but show the certificte lor. Performance is good, much better if you put Ah Pek Groundig & X1R. Plus KNN Air Filter.

 

This is my 2cents worth.

[Hondaman]

eh i forget ask u laa.. does mental preparation plays a major part? kat tak penat ke? aku drive with my family stakat gi melaka jer dah mcm nak mangkok, wat more penang mann

 

 

Must mentally prepared. I reached penang and my brain somehow starts to shutdown. coz never sleep. I dropped on the bed and straight away Yoshi sound came out (snoring) as what my fren said.

 

A fren of mine actually fall asleep while doing cornering in front of me. I saw his bike move more to the right(if he go further he will fall into the revine). Then he woke up and corner left again. Phew. he told me he fall asleep.

[xkissx]

tonight got meet-up?? i try to make it

[Xobium75]

:faint: :faint:

 

 

 

where you bought it? forumer or shop?

 

At shop...warranty 1 mnth finish already...

[Xobium75]

If coolent come out from hole that means there is either crack or leak in your block. Bring to mech to check. To the mech you trust. not the ones that burn ur pocket. Either they can skimmed it or suay have to change it. that one really burns. unless you can get a 2nd hand block at any scrap shop.

 

DAmn!! So Suey...so u guys haf any lobang good shop to recommend? Or any 2nd hand block? Ride vtec b4 but not this kind of damage....arghhhhh!!!

[Hondaman]

Sorry never come down. Wanted to go but cancelled when my fren father passed away. so have to visit.

[JuZ_FZ6]

DAmn!! So Suey...so u guys haf any lobang good shop to recommend? Or any 2nd hand block? Ride vtec b4 but not this kind of damage....arghhhhh!!!

 

 

I got spare parts!!! Look at my Siggy!!!

[joajas]

Hi guys, I am trying to install a pair of crash bar (same as Ah Pek type) on my ver s. Anyone know the size of the screws to hold the crash bar? The stock ones are too short. Thanks.

[Ah Pek]

Hi guys, I am trying to install a pair of crash bar (same as Ah Pek type) on my ver s. Anyone know the size of the screws to hold the crash bar? The stock ones are too short. Thanks.

 

Since you are going to do your back suspension this Saturday..might as well get it done there. Size and fitting is one thing...you need the correct torque poundage per inch otherwise..you goona experience 'tinkling' vibration thru certain rpm range. In short...you need the rigth tools for the job. If you bought the right stuff..the original bolt should fit.

[edition]

Sorry never come down. Wanted to go but cancelled when my fren father passed away. so have to visit.

 

wah sad .. dun like to hear tis kind of news ...

[joajas]

Since you are going to do your back suspension this Saturday..might as well get it done there. Size and fitting is one thing...you need the correct torque poundage per inch otherwise..you goona experience 'tinkling' vibration thru certain rpm range. In short...you need the rigth tools for the job. If you bought the right stuff..the original bolt should fit.

 

Thanks for the advice.

[JuZ_FZ6]

Hi guys, I am trying to install a pair of crash bar (same as Ah Pek type) on my ver s. Anyone know the size of the screws to hold the crash bar? The stock ones are too short. Thanks.

 

the long bolt is M10. No special tool needed. using normal ring spanner also can do well. only you need 2 nuts on a single side to counter lock them. does it to my S4 and no sound heard. its all in your gung-ho.

[AsHaRiE]

eh i forget ask u laa.. does mental preparation plays a major part? kat tak penat ke? aku drive with my family stakat gi melaka jer dah mcm nak mangkok, wat more penang mann

 

driving and riding up is almost two different feeling bro.. being in a car, you have lesser freeplay in the traffic.. u can't weave in and weave out as and when u like..(although proven wrong by JB cars)

 

furthermore, there's no thrill in a car.. basically.. everyone will be stuck inside and maintaining the same position and just wait till the destination arrive.

 

but for bikes, u can have the ability to open throttle and the constant feeling of wind beating you on the face.. its much thrilling and definitely more fun to be with your frens.. it wont get bored..

 

but still if ure unsure u can take it.. then slowly clock mileage.. go desaru.. then up melaka.. then up kl.. then up penang.. then u wont feel it..

 

a fren of mine. just got his 2a and went melaka.. he claim its a pure mental torture.. hahahah

[syarif]

driving and riding up is almost two different feeling bro.. being in a car, you have lesser freeplay in the traffic.. u can't weave in and weave out as and when u like..(although proven wrong by JB cars)

 

furthermore, there's no thrill in a car.. basically.. everyone will be stuck inside and maintaining the same position and just wait till the destination arrive.

 

but for bikes, u can have the ability to open throttle and the constant feeling of wind beating you on the face.. its much thrilling and definitely more fun to be with your frens.. it wont get bored..

 

but still if ure unsure u can take it.. then slowly clock mileage.. go desaru.. then up melaka.. then up kl.. then up penang.. then u wont feel it..

 

a fren of mine. just got his 2a and went melaka.. he claim its a pure mental torture.. hahahah

 

i havent tried gg to jb with my 4 even.. ahaha. but im still not confident with my bike uh. halfway break down then die. maybe, if there's a chance and i'm ready, i will.

 

but equipments like mesh jacket i dun have. i down own a riding boot and a full face. my glove is my only treasure. sad...

[joajas]

the long bolt is M10. No special tool needed. using normal ring spanner also can do well. only you need 2 nuts on a single side to counter lock them. does it to my S4 and no sound heard. its all in your gung-ho.

 

Thanks friend, but original bolt too short, will sort it out when i do my suspension. cheers.