[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[hanxx]

oh ya missed that '1pm'..

i doubt can make it on time?

maybe i call ah pek again?

lol.thanks!

[Ah Pek]

Ah pek, today before going to sch i was doing pre ride check and found that there is a small patch of EO on the ground. Same for last night when i parked at another lot. I was reading should be the oil seal that is off right?

 

And also when i turn my petrol valve to reserve, petrol came out and spilt on my hands but after i succcessfully finished turning to reserve it stopped, and when i turn back to on nothing. Juz that the first turn to reserve a palm full of petrol spilt out. Don't tell me it's my petrol valve going to ko soon?

 

...you got it all right! 10/10 :clap:If you need to replace the fuel kock, don't get the kit set ($38)..get the whole assembly at LAB for $110.

 

Primary gear shaft drive seal probably gone bad..less than $20 change and quick job. Check the shaft to crank case body area..see if its very wet with eo.

[Ah Pek]

haha.. lolx.. ya .. maybe i should replace it again.. anyway.. thanks for u advice again.. hows ur business doin hahah.. and ya one more thing.. when i ride theres this sound coming from the chain like a tuck tuck tuck sound.. everytime when i open the throttle.. then when i close it.. clutch in .. to hear the sound.. its not there..?? thx ah pek...

 

I had this problem before and turn out to be mu clutch..do a major readjustment for your clutch and see how. Let us know if it works.

[Ah Pek]

ah pek, will like to ask you regarding the spec3 headlight i intending to buy to change away my rxz headlight currently.

someone offered $70(let's say normal working condition, is it worth it?

since probably i will have to bring to shop to install which incur some labour fees?

 

thanks in advance!

 

It's worth but make sure the word "Stanely" is imprinted ('embossed) on the headlamp glass.

[Ah Pek]

"There is now a method of doing carbs cleansing without opening up the carbs..very cheap somemore" wow must learn but i got no money to sayang my bike. I need a job, i just ORD

 

Go get a job then

[Ah Pek]

xiaobanz..sat what time?

i get my bike only afternoon..haha!

 

aftermarket the headlight bike shop charge me $150!

 

anyway,its time for me wash carb also..ah pek any suggestions?

shop quote $80 to wash carb + $80 for tuning...

overpriced?

thanks!

 

Washed is $80..tunning normally $40..why $80 now..they use super computer with laser arh? Anyway...can be done for $20.

 

Saturday be around till at least 5 pm.

[hanxx]

yeah the way the mech talk to me i know he trying to 'TOK' me..haha.

ok will try make it on sat hopefully..but sunday confirmed!

yeap:thumb:

[xiaobanz]

xiaobanz..sat what time?

i get my bike only afternoon..haha!

 

aftermarket the headlight bike shop charge me $150!

 

anyway,its time for me wash carb also..ah pek any suggestions?

shop quote $80 to wash carb + $80 for tuning...

overpriced?

thanks!

 

Ya it's overpriced. That time i did carb washing at unique for $60 inclusive of tuning. But provided you know the mech.. haha. And also after market headlight unique charge $130 inclusive of installation.

 

Btw what time you going to get the bike?? Cos i doing at 1pm. I think if slow will stay there until about 3 ~ 5pm... If wan can give me a call.. i pm you my number.

 

...you got it all right! 10/10 :clap:If you need to replace the fuel kock, don't get the kit set ($38)..get the whole assembly at LAB for $110.

 

Primary gear shaft drive seal probably gone bad..less than $20 change and quick job. Check the shaft to crank case body area..see if its very wet with eo.

 

Wa sad... $120 for clutch plates + $320 for magnetic coil now $20 for shaft drive seal and $110 for fuel kock.. -.-''''

[kifakw]

wah xiaobanz you got a lemon s4vs ah?

 

or some things are unable to be checked visually?

 

btw what is a magnetic coil for?

[xiaobanz]

wah xiaobanz you got a lemon s4vs ah?

 

or some things are unable to be checked visually?

 

btw what is a magnetic coil for?

 

Lemon Version S?? Haha most of the things on my bike now are wear and tear parts.. Cannot blame anyone else.. Some more those things which i refer too are mostly internal parts except for the fuel valve and the rubber things.

 

Magnetic coil is used as a battery charger and bike starter. Btw if magnetic coil spoils, usually the battery and rectifier will spoil with it.. So no play play, if old liao best go and change it.. Juz nice i'm the owner with the magnetic coil weakening..

[salvatron]

yoyo

mind if i drop by too? lol

just got my spark plugs .. wanna diy .. ah pek .. please lend me ure tools

 

xiaoban u are the one riding the red version S rite. with alot of rust in ure coolent reservoir rite?.

[Ah Pek]

yoyo

mind if i drop by too? lol

just got my spark plugs .. wanna diy .. ah pek .. please lend me ure tools

 

xiaoban u are the one riding the red version S rite. with alot of rust in ure coolent reservoir rite?.

 

You are welcome! " riding the red version S rite. with alot of rust in ure coolent reservoir rite?."...LOL!..u remembered so well arh!?

[holugyi]

You are welcome! " riding the red version S rite. with alot of rust in ure coolent reservoir rite?."...LOL!..u remembered so well arh!?

 

a hel.... the worse rusty coolent, I saw that was Henary 's bike.. ha ha .. Dun mad! just fun..

[WRfreak]

I had this problem before and turn out to be mu clutch..do a major readjustment for your clutch and see how. Let us know if it works.

 

i just went to the bikeshop yesterdae.. he told me its the chain and sprockets.. so i went to change it .. and actuali it is the chain and sprocket.. i think its getting old lolx.. oh well.. time to spend $$$.. again.. now its smooth as ever.. haha

[xiaobanz]

yoyo

mind if i drop by too? lol

just got my spark plugs .. wanna diy .. ah pek .. please lend me ure tools

 

xiaoban u are the one riding the red version S rite. with alot of rust in ure coolent reservoir rite?.

 

Haha, you Henry?? Omg!!! You remember me as the super lost of rust in the coolent, sad..

 

a hel.... the worse rusty coolent, I saw that was Henary 's bike.. ha ha .. Dun mad! just fun..

 

Haha, Yeoo also..

[Tanaka]

Go get a job then

 

yah finding job now, not easy already send out 30 resume and went for 10 interviews still no job.....

[Ah Pek]

yah finding job now, not easy already send out 30 resume and went for 10 interviews still no job.....

 

Don't mind sharing what job you are looking at? May be someone here got lobang for you.

[hanxx]

yah finding job now, not easy already send out 30 resume and went for 10 interviews still no job.....

 

bro..try Resorts World at Sentosa.

good pay.haha!

[FrdAuZ]

bro..try Resorts World at Sentosa.

good pay.haha!

 

This wed mass interview at Suntec Convention Hall..haha.. got a call frm RWS yesterday..me looking for job too.

[Solar]

Hello, I'm new here. Just got a 2nd hand S4 a week ago. Need a lot of tips from you all on my ride .

Can I join u all tomorrow or Sun? But my ride is a Vtec 1, do you all mind?

[s4vtec]

SBF CB400 S4MG June 2009:cool:

 

Relaxing Fish Spa @ Qian Hu Fish Farm & Lunch @ JB + extended kopi session at Botak Jones AMK

 

 

Click here for link!!!

 

Regards

Thomas aka s4vtec

[s4vtec]

SBF CB400 S4MG June 2009:cool:

 

Relaxing Fish Spa @ Qian Hu Fish Farm & Lunch @ JB + extended kopi session at Botak Jones AMK

 

 

Click here for link!!!

 

Regards

Thomas aka s4vtec

[salvatron]

Haha, you Henry?? Omg!!! You remember me as the super lost of rust in the coolent, sad..

 

 

 

Haha, Yeoo also..

 

 

nooo laah..

I'm the only vtec 1 rider there. Adrian..lol

[Ah Pek]

Hello, I'm new here. Just got a 2nd hand S4 a week ago. Need a lot of tips from you all on my ride .

Can I join u all tomorrow or Sun? But my ride is a Vtec 1, do you all mind?

 

 

Plse come when free on Sunday morning. Location is AMK Ave 10 Blk 409 kopetiam smoker corner..if no one there, go to blk 469 void deck. If loss, call 90670020. Vtec or not..all same same. May be this thread should be name Vtec and Non Vtec S4.

[Tanaka]

Don't mind sharing what job you are looking at? May be someone here got lobang for you.

 

Prefer Engineering job because of my cert Precision engineering (Machining).

but if no choice driver also can.

 

Ah pek how much are you selling X-1R?