[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[Huatster888]

LOL ME 2 .......just goto feel after changing the full package from ah pek......everyday riding is shiok....smemore use crappy ngk spark plugs also nvm 1 actually ahahhaha.....still using it after 2 oil change .....nx oil change then change , it would be ...erm i duno ....until the gear shifting not shiok lol ahahaha10k later??

[Cpt.ZR]

True bro! I just got my S4 recently, and I can see me riding for a long time. One of the best overall road bike out there.

 

lol!

 

kao this statement i said abit wrong. lol. I just got my vtec1. lol.. have been eye for a decent one for ages... finally found one.. till date loving it! hahah

 

 

i guess we all just love honda CB bikes... hHAHAHA:angel:

[MrIce]

Just a noob question, how do I change the airfilter? Do I need to remove the fuel tank?

I know where it is. But its covered by what I think is the airbox. How to remove it? Im riding a Ver S.

 

not sure about ver.s but vtec1 u got to remove the tank then u will see got a place with 3 screw one, unscrew it then pull it out inside got a air filter if is those aftermarket one then ok liao if stock one maybe u might think to change to aftermarket one

 

stock one need replacement, aftermarket one can just clean up, recharge and use it again. erm if i am not wrong ah pek got a way to DIY "clean and recharge"

[dmot]

ah pek how much for a full package oe change and where to head down ? but a bit of warning coz i juz came back from overseas and my father was using the bike . dunno wad kind of maintenance he done to the bike . im keeping my fingers crossed ...

[Ah Pek]

ah pek how much for a full package oe change and where to head down ? but a bit of warning coz i juz came back from overseas and my father was using the bike . dunno wad kind of maintenance he done to the bike . im keeping my fingers crossed ...

 

Thanks for your interest in wanting to try out my eo...pm you liao.

[greenruby79]

Ah Pek....pm u something. Pls check it out. Thanks in advance....Cheers

[Ah Pek]

Ah Pek....pm u something. Pls check it out. Thanks in advance....Cheers

 

Replied liao.

[kano]

Hello Ah Pek,

 

I like to know whether Ah Fook got sell the Denso Iridium Plugs? Roughly he charge how much per piece? Thanks.

[Ah Pek]

Hello Ah Pek,

 

I like to know whether Ah Fook got sell the Denso Iridium Plugs? Roughly he charge how much per piece? Thanks.

 

I dunno leh. Call and ask lor. I don't recommend iridium anyway but you want I get. How much are you willing to pay?

[kano]

I dunno leh. Call and ask lor. I don't recommend iridium anyway but you want I get. How much are you willing to pay?

 

 

 

What you recommend? $100 enough?

[Ah Pek]

What you recommend? $100 enough?

 

Normal standard Denso will do lah..less than $50 only oso can last 30k liao for your riding style. If I got Nology Sliver plug come in, I let you know.

[kano]

Normal standard Denso will do lah..less than $50 only oso can last 30k liao for your riding style. If I got Nology Sliver plug come in, I let you know.

 

okok let me know..... thanks:angel:

[mesa]

Hi all.. Just wanna ask how much does it cost to fix a leaking fork. Mine is leaking one on the right side. And is fix one only or must fix both since i understand need to take out front wheel.

 

Thanks`

[MrIce]

Hi all.. Just wanna ask how much does it cost to fix a leaking fork. Mine is leaking one on the right side. And is fix one only or must fix both since i understand need to take out front wheel.

 

Thanks`

 

80-100 ? i fix 100 for both i think unqiue doing 80 for both

 

i recommend u change both, come to think logically right if u change one side only then it will be one side new fork oil another one old one then the balance is not there

 

so if u brake hard maybe it will go to the old one more since is not that stiffer as the new oil right ?

[Ah Pek]

Hi all.. Just wanna ask how much does it cost to fix a leaking fork. Mine is leaking one on the right side. And is fix one only or must fix both since i understand need to take out front wheel.

 

Thanks`

 

To add in to what MrIce said...this may not be a case of fork seal issue only..it could be your front fork upper section tube (stanchion) done bad like a deep scratch along it caused by sand stuck at the fork seal. That tube itself is $150+ at least. You won't know until you replace a new seal but a good mech can tell by rubbing his hand along the tube surface.

 

Can go check with Ah Fook if you want or just about any good Mech you know.

[mesa]

80-100 ? i fix 100 for both i think unqiue doing 80 for both

 

i recommend u change both, come to think logically right if u change one side only then it will be one side new fork oil another one old one then the balance is not there

 

so if u brake hard maybe it will go to the old one more since is not that stiffer as the new oil right ?

 

To add in to what MrIce said...this may not be a case of fork seal issue only..it could be your front fork upper section tube (stanchion) done bad like a deep scratch along it caused by sand stuck at the fork seal. That tube itself is $150+ at least. You won't know until you replace a new seal but a good mech can tell by rubbing his hand along the tube surface.

 

Can go check with Ah Fook if you want or just about any good Mech you know.

 

Thanks for the info! I shall go check it out this coming weekend...hope its only minor leaking problem.. probably go along alexandra area as I stay in the west. My fren ask me to go JB fix.. honestly I abit HUM to go there n fix. lolx..

 

HUAT AH!

[greenruby79]

hi guys, wana ask something bout helmet. i notice that most helmet comes with PSB stickers and some dont. is there any rules/law in Singapore that one MUST have a PSB sticker on their helmet? Will we be fine if we were caught not having one? I got my Arai RAM 3 without the sticker so im abit concern here. Hope to hear some comment from u guys.....Cheers

[mesa]

Ah Pek's EO update

 

Hi all, just wanna post on the fuel consumption of my bike.

Previously it was averaging 22.5km/L with a pillion most of the time.

Best was 24.5km/L when I was riding alone and riding from west to selarang camp via ECP, mostly highways

 

After changing Ah Pek's EO.

 

1st tank, travel 350km pumped 15L ~ 23.3km/L (improve 0.8km/L:thumb:)

gonna update on 2nd tank once its hit.

 

After this I will be addin valve cleaner for the next 3 tanks.

[MrIce]

anyone had face this problem ?

 

when u on side stand around 1 bar fuel gauge sometime u will feel that ur bike choking choking one ???

[Huatster888]

erm ah peh nology plug u say isit cheap???i listen to u hor din change plug , using normal ngk . ok rite???

[chawanmushi]

hi ah pek and the rest . got something to ask of you.

 

recently ive been using those " chiong " bulbs from LAB. and i realised that my headlight fuse gets burnt easily. is it due to the bulb issue? fuse is still normal 10A and bulb is normal 55/60.

 

As a result, i tested the bulb on a 15A fuse but it blewed as well.

 

then , i changed and tested the same 15A fuse on a Osram Nightbreaker. Few days later, fuse also got burnt. whats the problem ?

[Ah Pek]

erm ah peh nology plug u say isit cheap???i listen to u hor din change plug , using normal ngk . ok rite???

 

Its not cheap lah but want to get also difficult. Price not too far from original Denso iridium but what we buying it for is its almost resistance free feature using pure silver.

 

NGK is good too but I somewhat have preference for Denso lah.

[Ah Pek]

hi ah pek and the rest . got something to ask of you.

 

recently ive been using those " chiong " bulbs from LAB. and i realised that my headlight fuse gets burnt easily. is it due to the bulb issue? fuse is still normal 10A and bulb is normal 55/60.

 

As a result, i tested the bulb on a 15A fuse but it blewed as well.

 

then , i changed and tested the same 15A fuse on a Osram Nightbreaker. Few days later, fuse also got burnt. whats the problem ?

 

I think there is nothing wrong with the bulbs or fuse base on your description...but more likely a partially wiring connection that causes "transient" current load at random. This sudden surge of current (can be any ampere above rated load) load due to loose connection coming "on" and "off" would certainly cause this problem.

 

Suggest you check your H4 socket or wirings..even your headlamp switch (spray WD40 as dirt trapped in it can caused this 'defect'). Good luck.

[Ah Pek]

Ah Pek's EO update

 

Hi all, just wanna post on the fuel consumption of my bike.

Previously it was averaging 22.5km/L with a pillion most of the time.

Best was 24.5km/L when I was riding alone and riding from west to selarang camp via ECP, mostly highways

 

After changing Ah Pek's EO.

 

1st tank, travel 350km pumped 15L ~ 23.3km/L (improve 0.8km/L:thumb:)

gonna update on 2nd tank once its hit.

 

After this I will be addin valve cleaner for the next 3 tanks.

 

...arhhh...at least we see some progress. Do u feel the throttle is kind of 'tighter'?

[mesa]

...arhhh...at least we see some progress. Do u feel the throttle is kind of 'tighter'?

 

Yes Yes.. Got more response when i squeeze. I tink my throttle is whispering to me "turn me turn me".. lolx

 

I tink progress will be better cos first tank I am excited how good the response is so just whack.. now back to normal riding style.. haha