[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[ducktale83]

Ahpek,i took off the fuel cork already but there got like plastic straw inside..the straw must fix in the pin rite?

 

Sent from my GT-S5300 using Tapatalk 2

[ducktale83]

Jialiat liao..early in the morning whole house smell of petrol..lol

 

Sent from my GT-S5300 using Tapatalk 2

[Ah Pek]

Ahpek,i took off the fuel cork already but there got like plastic straw inside..the straw must fix in the pin rite?

 

Sent from my GT-S5300 using Tapatalk 2

 

???...u bought the kit?

[ducktale83]

No..i unscrew it and try to clean it..didnt took out the small screw..

 

Sent from my GT-S5300 using Tapatalk 2

[Ah Pek]

No..i unscrew it and try to clean it..didnt took out the small screw..

 

Sent from my GT-S5300 using Tapatalk 2

 

In dis case..the whole while tubings should all be out. Anyway..it's the diagrham that is spoiled (inside the small screw part).

[eddie_ash]

ah pek juz discovered that my block has some coolant fluid at the hole( u shud knoe wat im refering to), its very little like a few drops.. is it serious? btw i confirmed with a few shops my cam cover seal is leaking oil.. some recommended to top overhaul which i guess wud be better everything do one shot, replacing all the seals etc.. so wad do u think?

[Ah Pek]

ah pek juz discovered that my block has some coolant fluid at the hole( u shud knoe wat im refering to), its very little like a few drops.. is it serious? btw i confirmed with a few shops my cam cover seal is leaking oil.. some recommended to top overhaul which i guess wud be better everything do one shot, replacing all the seals etc.. so wad do u think?

 

If I were u..just change the seal. Who r the "some"..why must overhaul?..what's the reason? Ur "wud be better.." gonna cost u at least in thousands. As for the coolant leak..what can an top over haul job do for that..change new block?

[ducktale83]

In dis case..the whole while tubings should all be out. Anyway..it's the diagrham that is spoiled (inside the small screw part).

 

So,the long plastic tube no need to fix back?dunnoe wats the plastic tube for..

 

Sent from my GT-S5300 using Tapatalk 2

[Ah Pek]

So,the long plastic tube no need to fix back?dunnoe wats the plastic tube for..

 

Sent from my GT-S5300 using Tapatalk 2

 

The plastic white tunes and the fuel kock is a WHOLE ASSEMBLY..like dat ur's broken liao.

[ducktale83]

The plastic white tunes and the fuel kock is a WHOLE ASSEMBLY..like dat ur's broken liao.

 

The white hard tube is still with the fuel cork but there still a longer soft tube..like a big straw to put inside the white tube..or only mine got cos wat i remember i help my frenz change like dun hv the long soft tube..

 

Sent from my GT-S5300 using Tapatalk 2

[Ah Pek]

The white hard tube is still with the fuel cork but there still a longer soft tube..like a big straw to put inside the white tube..or only mine got cos wat i remember i help my frenz change like dun hv the long soft tube..

 

Sent from my GT-S5300 using Tapatalk 2

 

In dis case..whatever..u have to put it back on.

[Jehuty]

Ah Pek, do you have your own shop? I want to do up the bike back to its former glory. Its an old Ver S.

[Ah Pek]

Ah Pek, do you have your own shop? I want to do up the bike back to its former glory. Its an old Ver S.

 

Errr...what do u mean by it's formal glory? No..I don't have a workshop but still can make bike "former glory" whatever that means...ha....x3!

[Jehuty]

Errr...what do u mean by it's formal glory? No..I don't have a workshop but still can make bike "former glory" whatever that means...ha....x3!

 

Well it means make the bike swee, engine electricals everything.

[Ah Pek]

"everything" is a big word...LOL! U want ur bike to come "Alive"..than find Ah Pek.

[Jehuty]

Basically replacement of wear and tear parts of the engines, wiring and the carburettor.

[Ah Pek]

Basically replacement of wear and tear parts of the engines, wiring and the carburettor.

 

U have to go bike shop for these.

[HaMst3r]

Hi bros

 

I have a Super 4 Ver S but recently i faced this problem whereby my bike has no torque / "strength" to go above 80km/h. Any idea whats wrong with it?

[Ah Pek]

Hi bros

 

I have a Super 4 Ver S but recently i faced this problem whereby my bike has no torque / "strength" to go above 80km/h. Any idea whats wrong with it?

 

How was it b4?...what about ur "RPM"..does it go up?

[HaMst3r]

How was it b4?...what about ur "RPM"..does it go up?

 

Hello Bro Ah Pek

 

Last time still can go above 80km/h and the bike can still maintain its stability. Nowadays, whenever i go above 80km/h, it kinda of vibrate a bit and it sounds different. However, RPM did go up anyway.

[Ah Pek]

Likely electrical issue to the sensor circuit board inside the meter.

[DNA13]

hi!

just wanna ask, did anyone wanna sale u'r stock cb4 handle bar?

pm me please..

[roderick]

hi non-vtec friends!

 

is anyone letting go your e21 sidebox by any chance?

or maybe you only have ONE side?

 

Whatsapp / msg me? 98807639!

 

Just passed 2A tdy! =)

[ur13an]

hi all,

 

any idea where i can get the suspension protectors/covers for our ver s? the ones that covers the top bolt and nut

 

LAB dont have the stock anymore..

 

recently just did a swapping of direction of the bottom nut and bolt, if ppl want to steal my suspensions will have to remove my rear tyre.. =P

[Jehuty]

My bike giving me problems, I serviced the carbs but the problem still remains, bike sometimes stutters as if its running on 3 or even 2, I suspect its the fuel cork, could be rust clogging up, I'm not sure. There's still fuel, lots of it but its acting like it has none.