SBF Burgmans Cafe 2008 - K1 to K7

[william_liu]

Wah den lidat dunno where to place it liao....

 

Btw, is the one at wing yap openable? or is it just a sealed container with no way of opening it?

 

Any you know the dimensions?

 

Openable I'm not very sure.... I did see three openings with tubes, one from the engine breather, one to the atmosphere and one back to the engine oil filler.

 

Dimension-wise it's width is something like a 1.5ltr soft drink bottle, height is about 3/4 of the bottle bah....

[Arcfire]

Openable I'm not very sure.... I did see three openings with tubes, one from the engine breather, one to the atmosphere and one back to the engine oil filler.

 

Dimension-wise it's width is something like a 1.5ltr soft drink bottle, height is about 3/4 of the bottle bah....

 

Fuuwah..... tats freaking huge man...... well, mabbe i'll take a look at it if i've got the time tomorrow after work.

 

Btw, you know how much is it?

[william_liu]

Didn't ask cos they're out of stock. Maybe you can help to check it out also? Thanks!

[Arcfire]

Ok guys, here's the scoop.... I've been to FS and Wing Yap to take a look.

 

FS has the polini breather catch tank. It has 1 inlet and 1 outlet. Another opening at the end for air to escape/enter. Its more like a crankcase breather in the sense as oil may still escape through the vented opening so it doesn't really solve out problem.

 

Wingyap has the oil catch tank but its not openable. Its a sealed container and has 2 outlets and 1 inlet. 1 from the crancase, 1 goes to engine oil cap and last one back to the airbox.

 

Now, both are about the same size. 6" long and roughly 3" in diameter. This is a pain in the ass for fitting cos we don't have so much of free space around to fit this big bottle in. Both are not openable and is empty inside hence a pain to maintain. We can't put anything in there to improve on the condensation properties of the tank.

 

Price: FS's one including installation will cost about 100+ while the one at Wingyap will cost about 70.

 

To me, both are not optimal for our problem hence another solution would be to custom one at seng kwang but i guess this will be quite expensive. This however will solve the spacing issue since we can specify any size that we want that is suitable for our bike.

 

Last option we have is some of the catch tanks i've found in ebay. They are of about the same size as the ones readily available here. But good thing is that it has a cap which is openable hence much easier to customize if we need to. I believe the material and workmanship of the tanks are better as well. But these range from about 50+ to 70 just for the tank and excludes installation.

 

Whats your take on the above choices guy??

[william_liu]

Thanks for the effort! Hmmm... quite a dilemma! You got the link to the eBay oil catch tank?

 

Another option is to sound out Seng Kwang to see roughly what's the price... and if got better price if we order a few instead of one.

[Terrible One]

mine k6 all the time. cos the exhaust catalyzer broken liao

 

Did you do it on purpose or wat?

[Arcfire]

Mine backfire most of the time when decelerate... More frequent when using 95 than 98.

 

is it the inner portion at the gasket end of the exhaust?

[marvel]

Wah. den can sell me when I wanna do la!! Hah.. No never see the SYM,u got the pics? Think the problem with the fitting would be the clearence, if too low/too little back sweep the brake pump will hit the dash.. Do share some pics if you've done any mods k?

 

I waited 3mths plus for my head fairing to come, it finally did.. But then GHC workshop under renovation!! Suay ah..

 

 

cool wat kinda design is ur head mask?tot of gettin one oso..bt jap magize always mod k4..or the the terms cj44a/cj43a.did u import the heard mask?show some pic when u had mod it...

[bigcow]

Did you do it on purpose or wat?

 

 

never la... where got so rich??? i loot my burger till gone case liao... haha

[Terrible One]

cool wat kinda design is ur head mask?tot of gettin one oso..bt jap magize always mod k4..or the the terms cj44a/cj43a.did u import the heard mask?show some pic when u had mod it...

 

Oh no la.. I never mod, mine crack so I ordered the original replacement.. Wait for Arcfire to stike Toto ,den he can mod with u..

[marvel]

Oh no la.. I never mod, mine crack so I ordered the original replacement.. Wait for Arcfire to stike Toto ,den he can mod with u..

 

hahaha...slowly mod lor....wat to do sgp dun do custom mod oso...any idea of any shop that gt do minor mod?..or able of doin mod..feel free to txt me..

[Arcfire]

Sad news, i just went over to seng kwang to ask about customizing the oil catch tank but sadly, they are unable to produce it. So its back to square one again.....

[Scarab]

Info for those looking for burgerking original air filter.

 

It's now available at Guan Hoe for $43.85 incl of GST.

 

Thank you.

[Arcfire]

This might be a solution for our problems.

 

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&isfrommerc=1&itemcount=2&sspagename=ADME%3AB%3ABOCOR%3AUS%3A3&refwidgetloc=best_offer_email&usedrule1=CrossSell_LogicX&viewitem=&refitem=120136805905&item=120120352377&refwidgettype=cross_promot_widget

 

I'll probably order it tomorrow. If anyone wants to hitch on lemme know by tonite.

It'll be slightly cheaper cos we will save on shipping.

[william_liu]

I'm interested bro, but how and will it work?

[Arcfire]

I'm interested bro, but how and will it work?

 

Well, i'll be the experiment then.... but since it works on pcvs then it should work on ours as well since ours is also a pcv. but i dropped him a message so i'll wait for his reply.

[william_liu]

Was thinking also, with the amount of oil that I'm losing, the transparent container looks rather small, so will there be a need to empty very often?

 

Unless the black box thing can actually help prevent oil from passing or something... hmmm

[william_liu]

Jialat, my Burg-er suddenly went 'siao' crazy.... the idling keep dropping periodically and engine like want to die off.... checked a few things but nothing seems to be wrong.

 

Interim solution: I've raised the idling by 200~300 rpms, hopefully that will resolve the problem for now....

[Arcfire]

Jialat, my Burg-er suddenly went 'siao' crazy.... the idling keep dropping periodically and engine like want to die off.... checked a few things but nothing seems to be wrong.

 

Interim solution: I've raised the idling by 200~300 rpms, hopefully that will resolve the problem for now....

 

Solution : Lut the Burger ah! Haha....... No lah... mabbe its your plug or something....

[william_liu]

Hahahaha thanks! I took out the plug just now, took a look... can't say I can tell if anything is wrong with it....

 

Maybe I'll go get another one see if it solves the problem also. If not I'll try the 'lut' solution... hahaha

[Terrible One]

Hahahaha thanks! I took out the plug just now, took a look... can't say I can tell if anything is wrong with it....

 

Maybe I'll go get another one see if it solves the problem also. If not I'll try the 'lut' solution... hahaha

 

North-South highway...

[william_liu]

eh? What about it??

[Arcfire]

Bro, its about 5" by 1.5" by 1.5".

 

Lemme know if ya still interested ya?

[william_liu]

Are you getting it?

 

Still undecided if I want to go for the POSH oil catch tank solution instead...

[Arcfire]

Still undecided..... if you wan you go ahead with the posh one 1st