Honda NSR150SP Riders

[Foopower]

New rider here, TP insurance for the SP costs $1.5k

Can't afford it T.T

[wait4me]

Good Evening all SP riders,

 

Can any lao jiao here shed some clue where to find sp fairing bolts, nuts and screw. Missing a few here and there, some are rusty and rounded also. Would like to get all in a whole set if possible. Thanks in advance!

 

ooo i seee this too late, i found out i got some faring screws ...

 

anyone still want ?

[SP]

ooo i seee this too late, i found out i got some faring screws ...

 

anyone still want ?

 

I need it. When can meet me to pass it to me? I need it to screw it onto my manager chair with the screw tail facing upwards onto the cushion chair

[SPFTW]

Guys, just bought my SP. Full Red (3312) 2 weeks ago. Haven't done anything since I've bought it. I was riding at 50-60km/h towards woodlands on Gambas Ave. I started slowing down as I was approaching the junction before 3M building there. When I clutch in and started dropping gear. I realised my engine died. I had fuel battery. When I kickstart, there isn't compression. Changed spark plug still cannot start. Push start, it started but keeps dying when trying to change higher gears unless I maintain I high revs I can go to the next gears. I tried increasing the idling by adjusting the knob on the carb. I can kick start but I have Rev to start the engine and to keep it alive. If not it dies off. My carb has no air filter/airbox. Running on premix 1l/25ml. Can someone assist me?

[wait4me]

I need it. When can meet me to pass it to me? I need it to screw it onto my manager chair with the screw tail facing upwards onto the cushion chair

 

I will screw both yr s together.

[jasper92]

Need gather some opinions here,

 

Q1. Is changing clutch housing necessary? My mech say the knocking sound of my bike is quite loud and advice me to change it. I called LAB and asked, its about $140.

 

Q2. Anybody overhaul whole engine before? My mech show me i have a small slow leakage of EO beneath, he suspect its the gasket need to be changed. He told me to save around 1500rm for overhaul when the leak becomes jialat jialat, and also bring the clutch housing along to change together.

[wait4me]

Need gather some opinions here,

 

Q1. Is changing clutch housing necessary? My mech say the knocking sound of my bike is quite loud and advice me to change it. I called LAB and asked, its about $140.

 

Q2. Anybody overhaul whole engine before? My mech show me i have a small slow leakage of EO beneath, he suspect its the gasket need to be changed. He told me to save around 1500rm for overhaul when the leak becomes jialat jialat, and also bring the clutch housing along to change together.

 

i take your 1500rm , help you to do the following above ok ? i throw in your cluthc housing free

[Crazybiker]

New rider here, TP insurance for the SP costs $1.5k

Can't afford it T.T

 

same here, it seems only ntuc will take 21

 

don't know whether to get my own insurance or share with my brother, because he's not using ntuc. and if i want to share then he'll need to switch to ntuc

[Dai]

Hi All, help needed. Im unable to kickstart my bike. Condition: managed to kickstart the engine once, but engine will die off less than a min even though on choke. And unable to kickstart thereafter. Aside, the neutral light is dimmed or black out when i attempt to on the headlight. Is it battery flat or overflow carb?

[jasper92]

Anybody know where to get POP racing footrest? Or any other footrest for sp other than LAB's yoshi.

[SPFTW]

Hi All, help needed. Im unable to kickstart my bike. Condition: managed to kickstart the engine once, but engine will die off less than a min even though on choke. And unable to kickstart thereafter. Aside, the neutral light is dimmed or black out when i attempt to on the headlight. Is it battery flat or overflow carb?

 

Most probably it's your battery. Try take your battery to workshop and charge and try again if still cannot then bring your bike over to mechanic to check it out.

[Sigara]

Hi guys I'm currently having an issue with my Honda nsr sp. Can I ask what's the temperature gunge supposed to be during riding ? Is it normal to be in between the half mark or below ? If not so can anyone help me out and tell me if my bike has problems ? And what parts should I service to get this fixed? Replies would be greatly appreciated. Also can the senior riders out there reccommend a trustable and affordable honda sp mech/store. Already living in a expensive city and servicing also expensive. How buy food for myself like that haiss...

Edited September 17, 2016 by Sigara

[lubberduck]

Hi guys I'm currently having an issue with my Honda nsr sp. Can I ask what's the temperature gunge supposed to be during riding ? Is it normal to be in between the half mark or below ? If not so can anyone help me out and tell me if my bike has problems ? And what parts should I service to get this fixed? Replies would be greatly appreciated. Also can the senior riders out there reccommend a trustable and affordable honda sp mech/store. Already living in a expensive city and servicing also expensive. How buy food for myself like that haiss...

 

Hi,

 

It ranges from 10-35%. It seldom goes above 45% unless its stop and go traffic. Don't be too worried.

[WanFazer]

Assalamualaikum/Hello to fellow bikers...

 

Price : $19.90 Only with installation !!!LOWEST PRICE IN CAROUSELL !!!

 

100% Genuine Made In USA.

Over 400 pairs were sold !!!

 

PROMOTION !!!

Buy 2 pairs and above at $18/= per pair only !!! Purchase 4 pairs and above and enjoy free delivery + installation..

 

Contact me at 83885695 (Wan)

 

Pls check my listing at Carousell :

https://carousell.com/grabongrip

 

* 100 pairs sold in a month !! Customers who bought it, recommended to their friends coz this product WERKZ !!!

 

A MUST HAVE for your daily ride !!

-----------------------------------

 

- Grab On Grip covers reduce vibration and give you a softer feel, reducing hand and wrist fatigue, so you won't have that tingly feeling in your hands after a long ride.

 

- There are riders riding sportbikes with low handle bars, complain of sore palms from leaning on the grips for so long. With Grab On Grip covers, these problems will be a thing of the past !!!

 

- Grab On Grip covers allow you to ride in more comfort, especially on those long rides. PERFECT for the daily commuter, tour rider, and sport riders alike.

 

Features

---------

 

- Slip over existing grips for greater comfort, or to renew worn grips.

- Work with heated or standard grips.

- Save $$$, no need change the whole heater grip system which is very costly.

- Shock absorbing EPDM foam for a smoother ride.

- Provide comfort to wrist and palm. (Great for touring !!)

- Glove friendly.

- Extra durable, ozone, UV, gas and oil resistant

- Grip Covers MC402/width 1.25-1.45"/5"Length.

 

** Fits class 2, 2A, 2B bikes as long as its a standard grip, it can fit .

 

** There's customers that bought and fit it on their bicycles too !!!

 

Great for city riding where there's lots of traffic light, your hand will be tired during the on going "stop go" situation, this product will help to ease the stress on palm n wrist. Highly recommended for despatch/delivery riders.

 

"Once you try it, you'll LOVE it"

 

NOTE : Lot of customers been asking what's the difference between Grab On Grip with another brand that's selling @ $30-$35.

 

Ans :

- 1st of all, Grab on Grip is Made in USA while the other grip is Made in UK. So the difference in currencies. USD vs Pound Sterling

- Difference in QUALITY. No doubt both are EPDM Foam but customers that have used Grab On Grip and have tried the "other brand", eventually came back to use Grab On Grip. Customers claimed that the "other brand" became smelly after using it for awhile and it tends to slip to the balancer causing the throttle to "stuck" which is VERY DANGEROUS. They have never face this problem when using Grab On Grip. Well, expensive things doesn't mean its good.

 

- Some customers asked how come mine is "cheaper" than the rest ?

 

Ans : There's no need for me to claim i'm the "dealer/distributor" when the product i sell is 100% Genuine Made in USA.. As a biker, I wanted to share my great experience of using this product for more than 5 years at an affordable price.

------------------------------------

Tags : BMW - All models. Ducati - All Models. KTM - All Models. Harleys (Only if its standard grips. Those oversize grips, can't fit). Triumph - All models. Moto Guzzi, Reiju, Kawasaki - All models. Honda - All models. Yamaha - All models. Phantom, RXZ, Piaggio Vespa Gilera, Motard, Scramblers, Kups.

 

[ATTACH=CONFIG]337217[/ATTACH]

[ATTACH=CONFIG]337218[/ATTACH]

[ATTACH=CONFIG]337219[/ATTACH]

[ATTACH=CONFIG]337220[/ATTACH]

[ATTACH=CONFIG]337221[/ATTACH]

[ATTACH=CONFIG]337222[/ATTACH]

 

#GrabOnGrip #GOG

Edited October 23, 2016 by WanFazer

[Sigara]

Hi,

 

It ranges from 10-35%. It seldom goes above 45% unless its stop and go traffic. Don't be too worried.

 

Okay thanks for the info and enlightening me man. BTW going jb tonight for servicing.

[lubberduck]

Hi Guys,

 

I have thought of organising a HONDA NSR meetup where the 2 strokers riding the sp could all meet up to form a community. I honestly have no idea what the response would be and have not considered/planned the itinerary for the event yet. From here, i wish to get a rough response of the number of people who would still be interested in such events, so as to decide if i should host such an event and get the nsr community up and going. If successful, We would be seeing ALOT more activities upcoming if the community is strong enough and vibrant. And also reviving the Honda NSR group which is dispersed and inactive.

 

During the first meet i hope to make some things clear. And the agenda as follows:

 

. Get to know the 2 stroke NSR enthusiast

. Bond together as a community riding the same bike

. Exchange tips and knowledge within the group, ie(Basic servicing of bikes, minor modifications)

. Discussions of what the next event should be like and the direction of the NSR community

 

As of now, I am aiming for a group that have a common identity and share the passion of a two stroke machine. Further activities could be planning track days and such events again.

 

If you would be interested, Please do PM me your name and contact number as to form a whatsapp group.

 

 

LOOKING FOWARD TO BRINING UP NSR SG

[STAP]

Anybody know where to get POP racing footrest? Or any other footrest for sp other than LAB's yoshi.

 

TYGA Footrest. But will you buy? 300+ for a pair

[STAP]

Hi Guys,

 

I have thought of organising a HONDA NSR meetup where the 2 strokers riding the sp could all meet up to form a community. I honestly have no idea what the response would be and have not considered/planned the itinerary for the event yet. From here, i wish to get a rough response of the number of people who would still be interested in such events, so as to decide if i should host such an event and get the nsr community up and going. If successful, We would be seeing ALOT more activities upcoming if the community is strong enough and vibrant. And also reviving the Honda NSR group which is dispersed and inactive.

 

During the first meet i hope to make some things clear. And the agenda as follows:

 

. Get to know the 2 stroke NSR enthusiast

. Bond together as a community riding the same bike

. Exchange tips and knowledge within the group, ie(Basic servicing of bikes, minor modifications)

. Discussions of what the next event should be like and the direction of the NSR community

 

As of now, I am aiming for a group that have a common identity and share the passion of a two stroke machine. Further activities could be planning track days and such events again.

 

If you would be interested, Please do PM me your name and contact number as to form a whatsapp group.

 

 

LOOKING FOWARD TO BRINING UP NSR SG

 

will you be riding SP and not upgrading? but i appreciate you organising it

[Khairulaminurasyid]

Where is the best place to do overhaul which includes the engine as well?

[lubberduck]

Where is the best place to do overhaul which includes the engine as well?

 

It depends on your budget and what actually needs to be done. Price can range from 300 to afew thousand depending on how much of work is needed to be done.

[jbdoggy]

Khairul, Lubberduck

 

If by overaul you mean a top end rebuild, it wld cost abt SGD 1K+.

 

I had mine done in JB, after having a piston seizure on my way to Malacca. RM 3300. Brand new cylinder block, piston & ring set, piston bearing, RC valve, 2t pump, gaskets, plug, coolant, air filter. Tai Seng Kooi Motorsports. Boss is an ex racing star.

 

Probly abt the same price as sg, but at least the workmanship is good & he got it done in a day. Ordered parts on Mon morng, parts arrived tues late morng. Tues evening ready to go. In sg you probably have to wait abt a week or so.

 

I can vouch on the new cylinder & parts, as I was there & saw him unboxing it. My prev owner sold me an overhauled sp, showed me the receipt (sg workshop) 1K+. Prev owner claims new cylinder & piston. But the JB mech after looking at the damaged cylinder block told me its not a brand new block but at least 7-8 yrs old & showed me the wear patterns. No way this is brand new he said. So the prev owner's mech did a con job - using a 2nd hand block & passing it off as new.

 

After some experiences with a couple of sg workshops, I now only trust Tai Seng Kooi. Do the minor routine stuff in sg, but do the major stuff in JB.

 

btw Im not Tai's ad agent nor being paid by him to 'advertise' haha

[Khairulaminurasyid]

Thank you jbdoggy and lubberduck for the advise.

[smok3anddfly]

Hello guys anyone know where to buy new fairings? And if so,how much?

[jbdoggy]

Hello guys anyone know where to buy new fairings? And if so,how much?

 

Unfortunately these things I think only JB can do. I had my top fairing replaced there after i broke it after a little skid on damp road. My regular sg mech couldnt source anyone in sg having its replacement. Had mine replaced by Tai Seng Kooi. Rm$390.

[smok3anddfly]

Unfortunately these things I think only JB can do. I had my top fairing replaced there after i broke it after a little skid on damp road. My regular sg mech couldnt source anyone in sg having its replacement. Had mine replaced by Tai Seng Kooi. Rm$390.

Hi bro thanks for the reply! Did u replace everything or just the top fairing?

 

Sent from my SM-G935F using Tapatalk