[Group] YAMAHA Fazer

[adrielneo]

Recently I went to top overhaul my FZ1 cost me 1500, replacing auto tensioner, tensioner chain , valve clearance , throttle body syn and balancing. So expensive. Just to share with all about the cost

 

ooo so ex... you should ask Mr Pichudot here, i'm sure he is so skilled he can overhaul a fz1.. =/

[YenYu]

A shop making stickers somewhere along Bukit MeR@h L@ne...

 

I guess you all know where.

 

I no time to go into Boleh Land with you all and also not fit to go in with you all, cos I cannot even smell your exhaust smoke, on my 600 lamb even if I am riding behind all of you... x 3

 

So I just send for cleaning locally lor.

 

Dont liddat say, my 1k ride like a 200cc bike.. super slow....

[seahmh]

Recently I went to top overhaul my FZ1 cost me 1500, replacing auto tensioner, tensioner chain , valve clearance , throttle body syn and balancing. So expensive. Just to share with all about the cost

 

I am sorry to say this. But I think you may have been "chopped carrot head"...

 

But I may be wrong, as I am newbie and not 100% sure about the prices of these procedures.

 

When I did my valve clearance, my trusty mechanic only charges me about S$200 + a bit.

 

I understand that tensioner and tensioner chain costs around S$80 - S$100+ each.

 

So the sums somehow doesn't add up right.

 

But then, like I said, I may be wrong.

 

Let's wait for the grand master Pichudot to provide his views.

[seahmh]

Dont liddat say, my 1k ride like a 200cc bike.. super slow....

 

If yours is a 200cc, mine will be a 120cc kitten only.

[ssk]

Ha ha, the workshop replace the seal and gasket too. I did this at a reputable workshop. They replace the shims too. Honesty I think it's too expensive.

[ssk]

I should have gone to HL in then first place, it maybe approximately the same price.

 

the top overhaul service provide by unique it cost 950, it is not so cheap after all .

[pichudot]

You go tell the "make stickers" boss lor, say boleh-land, wash, clean and wax only SGD 14 nia. lolz...

 

Why pump RON95 only? Pump Shell V-POWER mah.... lolz...

 

it's a willing to chop & another willing to get chopped.. so y i go kaypo tell "make sticker" boss for?

 

i'm a fan of RON95.. v-power is too fast for me.. not for fainted heart.. lol..

 

 

Where where? i also want my bike a lot of those small small hairline scratches.. =(

 

those car wash places along NY hotel lo.. almost all are around that price..

[pichudot]

anybody have an idea how much is the universal ram mount holder? the 1 with many claws.

 

on a price wise..

 

if u getting the whole set that includes the claw + claw ball plate + arm + bike ball mount, suggest u get it from ram mount web..

 

if u getting just 1 or 2 pieces only, suggest u get it from JK..

[pichudot]

ooo so ex... you should ask Mr Pichudot here, i'm sure he is so skilled he can overhaul a fz1.. =/

 

I am sorry to say this. But I think you may have been "chopped carrot head"...

 

But I may be wrong, as I am newbie and not 100% sure about the prices of these procedures.

 

When I did my valve clearance, my trusty mechanic only charges me about S$200 + a bit.

 

I understand that tensioner and tensioner chain costs around S$80 - S$100+ each.

 

So the sums somehow doesn't add up right.

 

But then, like I said, I may be wrong.

 

Let's wait for the grand master Pichudot to provide his views.

 

u guys think i what? kungfu panda grand master?

 

i knows more towards electrical lei..

 

frankly speaking if u guys wanna know, i haven even did any major mechanical repairs on my bike..

 

but from what i see, ssk sure looks kinda carrot head chopped..

 

but if wanna be peace minded secured, go HL lo.. agent nia.. they wun chop u but do expect to pay more..

[pichudot]

Ha ha, the workshop replace the seal and gasket too. I did this at a reputable workshop. They replace the shims too. Honesty I think it's too expensive.

 

if u think u r a happy customer in the end, ur bike now free of problems, then dun grumble & think abt how much u pay lo.. ride more worry less..

 

catch u at mscp if fate meets..

[skateboy]

Thanks so much, skateboy.

 

If I am not wrong, the IU "cond0m" can be done at the auntie shop besides LAB, right?

 

How much is the damage for a synthetic leather "cond0m"? SGD 20? SGD 30?

 

Think I will have to get my IU checked (and replaced, if it is proven that my current IU is faulty) before I go auntie shop buy the synthetic "rubber"...

 

the IU pouch can b bought at any shops that do seat covers. just tell them if urs is the old or new IU. n plain one shd b ard 20. got design sure abit ex. u can go vicom do the check for free. only the replacement need to pay if the IU is expired. if u r replacing, u can buy the pouch, then replace that time just install accordingly.

 

plus or minus around the price in the below URL..

 

URL: http://www.singaporebikes.com/forums/showthread.php/342401-Ballistic-Performance-Components-Batteries-(Made-in-USA)

 

$240 for ballistic vs $320 for lithium. abit ex. $180 for yuasa, i can buy 2 liao.

 

Recently I went to top overhaul my FZ1 cost me 1500, replacing auto tensioner, tensioner chain , valve clearance , throttle body syn and balancing. So expensive. Just to share with all about the cost

 

where u did ur servicing? too ex liao... i did mine at tachyon, $250 valve clearance, $80 gasket replacement, $100 servicing throttle body n sync, additional replacement $125 for cam chain and $125 tensioner previously, $100 for 4 x injector servicing at racewerks. everything add up oso not so ex. but mayb ur got change shims.

 

hope the servicing was a job well done n u no need to worry about it when u ride.....

[pichudot]

$240 for ballistic vs $320 for lithium. abit ex. $180 for yuasa, i can buy 2 liao.

 

it's up to each individual..

 

one thing to note, the voltage & amps is something that you can't find it that good for normal batteries.. not to say its dimension/weight..

[ssk]

The mechanic change the piston ring too. 4x60=240.

 

Btw do I have to run in my bike?

[Yatz86]

The mechanic change the piston ring too. 4x60=240.

 

Btw do I have to run in my bike?

 

piston ring need to run in.....

 

because new piston rings will always have additional few mm when manufactured. dont worry the few additional mm will sit in nicely in the block head after time (maybe 2000km-3000km, got to check with mechanic). just keep it around 90-100km/h (play safe, 110km/h max no more) will do. and most importantly do not redline. Not even stationary.

[ssk]

piston ring need to run in.....

 

because new piston rings will always have additional few mm when manufactured. dont worry the few additional mm will sit in nicely in the block head after time (maybe 2000km-3000km, got to check with mechanic). just keep it around 90-100km/h (play safe, 110km/h max no more) will do. and most importantly do not redline. Not even stationary.

 

Thanks. CoPy that. But 2-3k km will take me a lOng time

[Yatz86]

Thanks. CoPy that. But 2-3k km will take me a lOng time

 

patience.....

 

alternatively. u touch and go hatyai.

or everyday cover all the expressways. TPE>KPE>PIE>CTE>KPE>KJE

=p

[dragonforce]

on a price wise..

 

if u getting the whole set that includes the claw + claw ball plate + arm + bike ball mount, suggest u get it from ram mount web..

 

if u getting just 1 or 2 pieces only, suggest u get it from JK..

 

no time to go JK leh.. haha.. anyway i should be getting the claw only.. all others i have..

[seahmh]

it's a willing to chop & another willing to get chopped.. so y i go kaypo tell "make sticker" boss for?

Yah lah. Yah lah. I admit I am the willing "carrot head" who is willing to get chopped.

 

i'm a fan of RON95.. v-power is too fast for me.. not for fainted heart.. lol..

What is considered as "too fast" for you? 299? lolz...

 

 

those car wash places along NY hotel lo.. almost all are around that price..

The bike wash there is good. But BEWARE!!! I heard while your bike get washed, the rider's "shaft" can get "polished and cleaned" at NY Hotel... DANGEROUS!!! This one is really "not for fainted heart"...

[seahmh]

the IU pouch can b bought at any shops that do seat covers. just tell them if urs is the old or new IU. n plain one shd b ard 20. got design sure abit ex. u can go vicom do the check for free. only the replacement need to pay if the IU is expired. if u r replacing, u can buy the pouch, then replace that time just install accordingly.

 

Hi, skateboy,

 

Thanks so much for sharing selflessly.

 

So do you mean to say I have to get the pouch ready first, before I go to VICOM to tell them that I need to replace my IU (in the event that my IU is really faulty after they have checked it)?

 

So meaning to say, I have to drop by VICOM twice?

 

First, to check if IU is faulty. Second time to go with the "rubber" and put it over the new slim IU BEFROE the VICOM mechanic fix my new IU onto my IU bracket?

 

Or is the "latex" simply a "wear over the IU"?

 

Sorry for my many questions, newbie lah (in wearing "latex" for IU).

[seahmh]

Thanks. CoPy that. But 2-3k km will take me a lOng time

 

Wah lau... This is so easy.

 

Pass your ride to Pichudot for 5 days.

 

He will run in swee swee and hit the 3K km mileage for you in no time.

 

3K km to him is chicken-feat.

 

lolz...

[adrielneo]

you guys damn high sia lol...

[seahmh]

you guys damn high sia lol...

 

Festive mood mah. lolz...

[dragonforce]

Hi, skateboy,

 

Thanks so much for sharing selflessly.

 

So do you mean to say I have to get the pouch ready first, before I go to VICOM to tell them that I need to replace my IU (in the event that my IU is really faulty after they have checked it)?

 

So meaning to say, I have to drop by VICOM twice?

 

First, to check if IU is faulty. Second time to go with the "rubber" and put it over the new slim IU BEFROE the VICOM mechanic fix my new IU onto my IU bracket?

 

Or is the "latex" simply a "wear over the IU"?

 

Sorry for my many questions, newbie lah (in wearing "latex" for IU).

 

my advice do not go for IU inspection with any IU cover, sticker etc. they will probably fault it and say it caused your IU to be unable to detect when you ride pass ERP gantry. So, simply go vicom have your IU checked, pass already then go buy your cover etc.

[seahmh]

my advice do not go for IU inspection with any IU cover, sticker etc. they will probably fault it and say it caused your IU to be unable to detect when you ride pass ERP gantry. So, simply go vicom have your IU checked, pass already then go buy your cover etc.

 

OIC. Thanks very much for your advice.

 

Their surname is "Lai"...

[ongsujie]

hey guys i just bought a 2010 fazer with akra slip on. the CO setting is -4,-4,-4,-4, issit correct? i understand the stock setting is -5,20,20,2 right?

thanks a lot...