Bike Cant Move =(

[BigDogs]

Ok i just recently took out a Spec 3 plate FBC only bout 3 weeks old. So yesterday night were out with some friends and they decided wanted to do some donuts and wanted to try on my bike, but it was dam hard to do evn with full clutch release the wheels never seem to skid.

 

After that i notice my clutch seemed to be further then usual so i just switched it off let my bike take a break, then later when i switch on again i clutch in engage gear 1 and release my clutch FULLY the bike never move, its like idling just standing still. I tried other gears also same :cry:

 

So i readjusted the clutch cable the ones near the lever still cannot then i adjust the nuts at the engine. Now my bike can move but i cant seem to throttle up once i throttle up its like i half clutch the RPM jump up but bike never go faster. Please any1 have any advice :cry:

[eric78]

clutch plates burnt? tink u better check ur bike wif de mechanics u trust.

[euz]

Ok i just recently took out a Spec 3 plate FBC only bout 3 weeks old. So yesterday night were out with some friends and they decided wanted to do some donuts and wanted to try on my bike, but it was dam hard to do evn with full clutch release the wheels never seem to skid.

 

After that i notice my clutch seemed to be further then usual so i just switched it off let my bike take a break, then later when i switch on again i clutch in engage gear 1 and release my clutch FULLY the bike never move, its like idling just standing still. I tried other gears also same :cry:

 

So i readjusted the clutch cable the ones near the lever still cannot then i adjust the nuts at the engine. Now my bike can move but i cant seem to throttle up once i throttle up its like i half clutch the RPM jump up but bike never go faster. Please any1 have any advice :cry:

it best let ur bikeshop have a look at ur bike.

An advice for u, don't lend ur bike to other ppl to play stunt....... if touchwood he skidded or happen an accident then u wan to claim the bike repair cost from who????????

[BigDogs]

clutch plates burnt? tink u better check ur bike wif de mechanics u trust.

 

Since i adjusted my clutch cables now can move, i can travel at 100 all fine but when i try to power up to overtake or u know like accelerate suddenly, its like half clutch like dat, are these the effects of burnt clutch plate? And does warranty cover burnt clutch plates?

 

it best let ur bikeshop have a look at ur bike.

An advice for u, don't lend ur bike to other ppl to play stunt....... if touchwood he skidded or happen an accident then u wan to claim the bike repair cost from who????????

 

Yah i'm planning to go my bikeshop tommorrow morning 1st thing man i feel so so so sad my baby become like dis

[AsHaRiE]

ermm.. ur bike is FBC right? shudnt it still be in running in condition?.. anw.. shudnt have tried stunts while the bike is still new.. engine not yet set in..

[euz]

ermm.. ur bike is FBC right? shudnt it still be in running in condition?.. anw.. shudnt have tried stunts while the bike is still new.. engine not yet set in..

 

Agree............. :thumb:

new bike & if his bike accidentally drop, then he will be even more heart pain..........

[BigDogs]

It was a stupid thing to do i agree man but i mean at the spur of the moment every1 was like "come la come la dun worry la" so it was tough to say no la

 

Whats important now is that are these the symptoms of clutch burn? I can now travel at 100 fine but when i throttle up it will go like half clutch. And also is this covered under warranty? *hopes and prays*

[smiley73]

It was a stupid thing to do i agree man but i mean at the spur of the moment every1 was like "come la come la dun worry la" so it was tough to say no la

 

Whats important now is that are these the symptoms of clutch burn? I can now travel at 100 fine but when i throttle up it will go like half clutch. And also is this covered under warranty? *hopes and prays*

 

Just act blur tell them the problem...why like that

[BigDogs]

Just act blur tell them the problem...why like that

 

Wa i hope they will do for me, how much if change clutch plate ah? never knew so easy to burn clutch plate man

[euz]

Wa i hope they will do for me, how much if change clutch plate ah? never knew so easy to burn clutch plate man

if u know the future then u will be GOD..............

hehe...........

[smiley73]

Wa i hope they will do for me, how much if change clutch plate ah? never knew so easy to burn clutch plate man

 

 

100++ ba not sure

[BigDogs]

if u know the future then u will be GOD..............

hehe...........

 

huh??

[skateboy]

a 3 weeks old bike, running in is not completed n u tried to do stunts with it? ur friends ask u to try, u can simply say no... if they ask u to use sh1t to clean ur bike, would u want? i dun think so.

 

anyway, when u rev, ur rpm can go up smoothly? if can, ur engine got no prob. to ans y ur bike cannot accelerate, will most probably b the clutch plates worn due to doing of stunts. n engine will b damn noisy i suppose...

 

changing of clutch plates, i think shd b ard $120 like that, including a paper seal that seals the cover.

 

n prepare to get a scolding from the mech. n with this, ur bike can't claim warranty cos this is not factory fault. if its factory's fault then can.

[eric78]

Since i adjusted my clutch cables now can move, i can travel at 100 all fine but when i try to power up to overtake or u know like accelerate suddenly, its like half clutch like dat, are these the effects of burnt clutch plate? And does warranty cover burnt clutch plates?

 

 

 

Yah i'm planning to go my bikeshop tommorrow morning 1st thing man i feel so so so sad my baby become like dis

juz try ur luck at ur bikeshop ba...if they dun wanna repair for u, i can recommend a bike shop for u to go to, experienced mechanics, friendly bosses n reasonable prices.

[eric78]

Wa i hope they will do for me, how much if change clutch plate ah? never knew so easy to burn clutch plate man

 

changin of clutch plates is ard $120 but not forgettin engine oil hv to be replaced at de same time. So expect cost to be ard $180.

[WingZer0]

could be the clutch slip due to overheat, coz ur bike still new...try to start and move off in the morning...

[BigDogs]

Running in finish oredi 2.4k on mileage oredi i roam around alot

 

I hope shop can help me

[skateboy]

some ppl run in up to 5k km.

 

u pay them to do for u, sure can. if claim warranty, i dun think can.

[Burnt]

Running in finish oredi 2.4k on mileage oredi i roam around alot

 

I hope shop can help me

 

Running in maybe up to 5k or even 10k .. new bike n if u plan to keep it longer , well maintain , prob free .. should do so ..

Dun Whack so hard yet .. maybe around 10k den try top speed n all .. Speed oso gradually increase ..

 

2cents of advise

[Darkness19]

bro ur bike so new only,u should nt lend to other ppl to play stunt,if anything happen sure heart pain,get ur bike to a bikeshop to check asap:thumb:

[Guest limpeiwah]

clutch burnt. must change along with new engine oil

[PaLmEr]

time for new clutch plates.

[IvikaRazI]

Ya lor should take really good care of the bike. Unless got money then can do stunt, provided you mod the bike for stunts. I have a cuz who did a burnout, then clutch plate gone. Take this as an expensive lesson.

[BigDogs]

Well went to my bikeshop today, ok the thing is engine break is all fine i tried engine breaking everything is ok but when the RPM goes to 5 and i accelerate more the RPM needle just shoots up engine sound oso go up but bike dont go faster it juz maintains speed.

 

According to shop its mostlikely V-tec problem, ask me go back to boonsiew. Any1 know where is the service center? coz called em today but they say cant come today too many bikes so ask me come tommorrow.

[fufu]

new bike its better to let it season before stuns 5km is not enough for u to start doing stun....