Kawasaki KRR150 Riders

[norishimu]

lol and how to go back to PIE?

 

rmbr the X junction below the expressway?

go bck there..

opp direction of course..

travel up that slope..

but keep left..

exit again..

u r going downslop this time..

u'll pass by Japanese sch..

travel straight..

u can see exit to PIE Changi Airport..

keep straight..

u'll c exit PIE Jurong..

voila..

[SparkerS1]

u will feel ur ride heavier...

corner more stable...

weeeee:)

another question bros dont mind, usually when you guys use choke to start the bike, how much is the rpm reading? cos i realise mine is like on the high side, i use choke to start, my rpm reading hit to 7000+ already, and off choke rpm reading is at 2500+-3000k, there's a time when i was travelling in the highway when i hit the top gear and travelling at 100km/hour my rpm reading was already at 10000-11000, is not suppose to be that high right?

everyday is normal to use choke to start.

service ur carburetor n get it tuned

haha no la just wondering. i thinking of buying krr. fat tire got affect fuel consumption? cant wait to get 2b man! soon, 1 more lesson

no diff on FC leh

[kimmeng]

rmbr the X junction below the expressway?

go bck there..

opp direction of course..

travel up that slope..

but keep left..

exit again..

u r going downslop this time..

u'll pass by Japanese sch..

travel straight..

u can see exit to PIE Changi Airport..

keep straight..

u'll c exit PIE Jurong..

voila..

 

so sweet of you.

thanks alot for your info, mr street directory. haha.

[compfused]

Goin down the slope just keep left and filter left into PIE..You should be able to see the sign that says PIE..If you missed that can still go into PIE at the one at Tampines..But its a bit further..

[Muskal]

yalah. **** sia. nw i m trap sia. don wanna haf anyting to do wit the bikeshop but cant. Wanna give back the bike back also cant. anybody haf any advice?

[compfused]

yalah. **** sia. nw i m trap sia. don wanna haf anyting to do wit the bikeshop but cant. Wanna give back the bike back also cant. anybody haf any advice?

Read up on the thread about THE shop..Someone did come up with a solution or somethin..

[smallboi]

dunnoe who else ah, still new here also.. can arrange then fun sia..

 

i live in east side also.. bedok reservoir... i tink got alot here stay east ar.. hw want lepak2 east2 kr rider... hahha

 

eh ur bike like same oni like mine... hehe..

 

yah sia... some more same plate.. FY lagi... if u change ur bubble to red onli.. same oredi sia.. abt the paintwork thing... still long den doin ar... save money 1st... haha.. da pokai sia...

[house]

harlow smallboi! havent seen ur krr around leh! park beside me leh. LOL.

[NicholasLJ]

weeeee:)

 

everyday is normal to use choke to start.

service ur carburetor n get it tuned

 

no diff on FC leh

 

noted, thanks sparker (:

[atrophy]

i live in east side also.. bedok reservoir... i tink got alot here stay east ar.. hw want lepak2 east2 kr rider... hahha

 

 

 

yah sia... some more same plate.. FY lagi... if u change ur bubble to red onli.. same oredi sia.. abt the paintwork thing... still long den doin ar... save money 1st... haha.. da pokai sia...

 

 

one of the fridays lah

[blade1313]

after loking at smallboi kr. reminded me of something. to kr riders(to those who don know). if u all take out the pillon handle bar pls be careful. your seat can be easily be open unless u all put a stopper/obstruction to prevent the mechanisim from being open from the hole that originated after taking out the pillion handle. especially if your seat is nice2.

[apitBIOL]

after loking at smallboi kr. reminded me of something. to kr riders(to those who don know). if u all take out the pillon handle bar pls be careful. your seat can be easily be open unless u all put a stopper/obstruction to prevent the mechanisim from being open from the hole that originated after taking out the pillion handle. especially if your seat is nice2.

 

i learn that the hard way ages ago.. :cheeky:

[blade1313]

i learn that the hard way ages ago.. :cheeky:

 

yeah... i learn it the hard way too when i had my kr... that time i just do up my seat cover for only 5 days.

[Xenox]

hey guys... dun know is it me or wat... i kinda find my bike is louder then last time... but i ride the power and everything is still there... piston just change like 5 month ago?... can't be rite spoil... or izzit time for full service? i wonder full service is good or bad? if dun do wat will it affect? and i found out this is after i pump v-power... cause i always pump 98... then pump v-power then like that... then now use 98 also....

[RainKR]

tonite im going jb.....agl....anyone wanna follow?msg me 91806491.....

[compfused]

after loking at smallboi kr. reminded me of something. to kr riders(to those who don know). if u all take out the pillon handle bar pls be careful. your seat can be easily be open unless u all put a stopper/obstruction to prevent the mechanisim from being open from the hole that originated after taking out the pillion handle. especially if your seat is nice2.

With or without..It still can be opened..

 

tonite im going jb.....agl....anyone wanna follow?msg me 91806491.....

How to follow? You so fast..

[RainKR]

With or without..It still can be opened..

 

 

How to follow? You so fast..

 

 

kr a bit hard...tzm da easiest....haiyak!1 karate chop n da seat is opened...

 

where got i so fast......i very slow...safety rider u noe....

[compfused]

kr a bit hard...tzm da easiest....haiyak!1 karate chop n da seat is opened...

 

where got i so fast......i very slow...safety rider u noe....

now we know who to look for when a TZM seat/bike get stolen..

 

Slow doesn't mean safe and fast doesn't mean not safe..

[RainKR]

now we know who to look for when a TZM seat/bike get stolen..

 

Slow doesn't mean safe and fast doesn't mean not safe..

 

 

eh u guys loves to play with words lah,headache2....ok2 la,im neither slow nor fast....moderate....safe riding....fast,safer riding....ok bo...? esai buey pengyu....

[RainKR]

btw im not riding tzm for wat use i steal tzm seats.....not as good looking as our KR seats....hahaha...

[compfused]

eh u guys loves to play with words lah,headache2....ok2 la,im neither slow nor fast....moderate....safe riding....fast,safer riding....ok bo...? esai buey pengyu....

:lol:

[Guest MeanRider07]

Guys I jus went to Jb ah kua lane there to do my bike, overhauled the bike and left it there for 3 days. And the total bill was 1k rm. Only changed the reed valve, Gaskets, EO, Conrod,Conrod bearings, another dunno wad bearings inside the engine wan and a few more things cant rmb liao. Did I keena Ketok by the shop ?

[shitson_rico]

no prob..

friendly forum..

we help one another..

 

so how's ur ride so far?

 

it was gr8 thank u.. but nowadays dun speed cuz later kana again die lor..

 

yah sia... some more same plate.. FY lagi... if u change ur bubble to red onli.. same oredi sia.. abt the paintwork thing... still long den doin ar... save money 1st... haha.. da pokai sia...

 

 

yah sia... i juz stick to my good ol' bubble .. hehe... i now oso no money liao, gotta pay my 1st installment dis week.. sigh... btw bro u take out from shop or forumer?

 

 

btw guyz, is it normal gear 1 wen moving off from stationary or traffic light it will make loud noise? like, ppppprrrrraaaannnnnggggg...!! is it aniting to do wit my engine? err.. or do i open my clutch too much?

 

n one laz ting, how occasionally muz go for maintenance fer a krr? how much roughly will it cost me? im living in north area, ani ideas to ani gud bike shop around here?

[compfused]

Guys I jus went to Jb ah kua lane there to do my bike, overhauled the bike and left it there for 3 days. And the total bill was 1k rm. Only changed the reed valve, Gaskets, EO, Conrod,Conrod bearings, another dunno wad bearings inside the engine wan and a few more things cant rmb liao. Did I keena Ketok by the shop ?

One big question..Do you trust the shop?

 

btw guyz, is it normal gear 1 wen moving off from stationary or traffic light it will make loud noise? like, ppppprrrrraaaannnnnggggg...!! is it aniting to do wit my engine? err.. or do i open my clutch too much?

Lacer identified..You opened the throttle too much..

[flywheeler]

it was gr8 thank u.. but nowadays dun speed cuz later kana again die lor..

 

 

 

 

yah sia... i juz stick to my good ol' bubble .. hehe... i now oso no money liao, gotta pay my 1st installment dis week.. sigh... btw bro u take out from shop or forumer?

 

 

btw guyz, is it normal gear 1 wen moving off from stationary or traffic light it will make loud noise? like, ppppprrrrraaaannnnnggggg...!! is it aniting to do wit my engine? err.. or do i open my clutch too much?

 

n one laz ting, how occasionally muz go for maintenance fer a krr? how much roughly will it cost me? im living in north area, ani ideas to ani gud bike shop around here?

 

Dude if ya stay in yishun then i recommend soon him motors at Yishun Industrial park A. The boss is david, very skilled mechanic but he seldom work on bikes now. Stay in office answer phone only. If not look for Ah Meng the mechanic. WARNING do not go to the fat dude with the crewcut hair style. Hes a good mech but chops people money.

 

But if all you want to do is change oil and spark plug then can diy. My friend and me going to diy our engine oil soon. Your welcome to join in.