[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[scarr]

Hey guys, i just realized my rear brake isn't biting well. I notice that that's like no braking power even to the extend that when i stop on the carpark slopes, i actually roll back even when i applied the rear brake. What could be the problem? Thanks in advance!

[Ah Pek]

Hey guys, i just realized my rear brake isn't biting well. I notice that that's like no braking power even to the extend that when i stop on the carpark slopes, i actually roll back even when i applied the rear brake. What could be the problem? Thanks in advance!

 

Check your hydraulic reservoir (the round semi transparent cyclinder with a black cap) level..you may be out of DOT2 hydraulic fluid caused by lead somewhere.

 

The other possibility is your that brake pad has worn so badly till there is nothing much of it to bite your brake disc..but unlikely. I would rule out someone squirt some oil on the brake disc or pad as a 'joke'...LOL!

 

Ok..this is VERY POSSIBLE..your back brake pump gone liao. Change pump kit or whole unit. Check for fluid leak around the pump area.

[Baphomet]

Not sure if your logo label badge is glued type or embossed..at any rate, you have to choose between the 'beauty' of damge or no logo...LOL! Small matter lah...live with it, as long as bike can overtake R6 ok liao mah

 

haha...okok will go there see what they can do..thanks man!

[scarr]

Check your hydraulic reservoir (the round semi transparent cyclinder with a black cap) level..you may be out of DOT2 hydraulic fluid caused by lead somewhere.

 

The other possibility is your that brake pad has worn so badly till there is nothing much of it to bite your brake disc..but unlikely. I would rule out someone squirt some oil on the brake disc or pad as a 'joke'...LOL!

 

Ok..this is VERY POSSIBLE..your back brake pump gone liao. Change pump kit or whole unit. Check for fluid leak around the pump area.

 

The brakes seem to work well the day after i realised it wasn't biting. Anyway, i just topped up the brake fluid cos it seemed a little low. And it seems to improve braking response. Hopefully that'll be the end of my ordeal!

[Ah Pek]

The brakes seem to work well the day after i realised it wasn't biting. Anyway, i just topped up the brake fluid cos it seemed a little low. And it seems to improve braking response. Hopefully that'll be the end of my ordeal!

 

Have to monitor for a few weeks like once a week. You never know the pump seal is leaking out fluid mildly.

[scarr]

Have to monitor for a few weeks like once a week. You never know the pump seal is leaking out fluid mildly.

 

alright will do just that. thanks for the advise!

[Ah Pek]

Guys...of late I have been testing a product that actually coat the internal engine compartment like gear box, cylinder wall and piston that has naturally been worn due to long run bike usage. Its not commercially available for bike yet but will be someday.

 

It have drastically improved my fc (not stating any figures here, prefer user speak for themselves), and perform much like X-1R (for those who have tried it). The only concern was clutch slipping but so far, holding at 13k rpm at maxs 180-190 km/hr has proven ok. Of course it does more than just this..

 

Its a eo premixed and what it does is much like stripping an engine and have the the various vital components like piston, cylinder wall and gears coated (thermal and ceramic) manually for race purposes. It coating is in micro layers.

 

Its not a cheap ($48 for 120ml to last you 30,000 km as a one time treatmant) product but after so many tinkling with liquid engineering improvement stuff, this is by far the very best I come across..yah..latest techno product used by NASA.

 

Just sharing...but if any of you are adventurous enough and serious to try, pm me.

[meowmeow]

hi hi im back again..keke does anione selling used tankbra for version-S..?? Seemed like no wan & no luck in the garage sale so far :cry:

[Ah Pek]

hi hi im back again..keke does anione selling used tankbra for version-S..?? Seemed like no wan & no luck in the garage sale so far :cry:

 

Just gave away one second (2 years old) hand one Ver S.. yesterday..Baxster somemore.

[norishimu]

haha. really no luck fr him lol.

[stRobe]

What are the ill-effects of using 2T oil for the forks instead of Fork Oil?

[Baphomet]

Guys...of late I have been testing a product that actually coat the internal engine compartment like gear box, cylinder wall and piston that has naturally been worn due to long run bike usage. Its not commercially available for bike yet but will be someday.

 

It have drastically improved my fc (not stating any figures here, prefer user speak for themselves), and perform much like X-1R (for those who have tried it). The only concern was clutch slipping but so far, holding at 13k rpm at maxs 180-190 km/hr has proven ok. Of course it does more than just this..

 

Its a eo premixed and what it does is much like stripping an engine and have the the various vital components like piston, cylinder wall and gears coated (thermal and ceramic) manually for race purposes. It coating is in micro layers.

 

Its not a cheap ($48 for 120ml to last you 30,000 km as a one time treatmant) product but after so many tinkling with liquid engineering improvement stuff, this is by far the very best I come across..yah..latest techno product used by NASA.

 

Just sharing...but if any of you are adventurous enough and serious to try, pm me.

 

hmn...im interested..but still have x1r left leh...dun wan waste leh..

[Baphomet]

guys sumthinf funnie happened...my mileage suddenly improved by 25km. there's no change of routes. same usage..scared scaly is my reserve knob spoil liao so actually is in reserve liao...haha...later will go pump petrol then the truth will be out.

[Ah Pek]

hmn...im interested..but still have x1r left leh...dun wan waste leh..

 

No problem..just add it on...but at least 1000 km more before next eo change. Each time you stop, the layers form in micro layers and bond to the metal surface when it cools down. You do feel you getting back compression as if the bike is newer and smooth. X-1R becomes a compliment to it.

[Ah Pek]

guys sumthinf funnie happened...my mileage suddenly improved by 25km. there's no change of routes. same usage..scared scaly is my reserve knob spoil liao so actually is in reserve liao...haha...later will go pump petrol then the truth will be out.

 

If this is after using X-1R..its nothing surprising. If you use the other one together we talk about in previous post above, you can say it's surprising..kekeke!

[tim17]

ah pek ni hao mah???

[Ah Pek]

What are the ill-effects of using 2T oil for the forks instead of Fork Oil?

 

Same lah..no ill effect, just that you pay lower price for the 2T oil and its viscosity is not as reliable as fork oil..thus require much earlier replacement.

[Ah Pek]

ah pek ni hao mah???

 

Wei!..wah!!!...ni tou na li chik arh?...how chui mei u kann chienk ni post hor?..siay_siay..woh hao ..ni nerh? (This is Ah Pek Han_U Ping_In )

[Ah Pek]

haha. really no luck fr him lol.

 

Talking about tank bra..there was a tank bra theft last few days ago at the MCP at AMK Hub. Discussion is if I'm not wrong at S4Vtec forum. The thief did not get away with it because the bra was hard to take off. Bike panties anyone?

[tim17]

Wei!..wah!!!...ni tou na li chik arh?...how chui mei u kann chienk ni post hor?..siay_siay..woh hao ..ni nerh? (This is Ah Pek Han_U Ping_In )

 

don't understand a single ****!!

 

busy working mah... class 2 test coming lao... YES!!!!! but not buying r1 anymore.. my insurance $1.7k!!! irritating!!! is like my 3 years super4 insurance...

[Ah Pek]

don't understand a single ****!!

 

busy working mah... class 2 test coming lao... YES!!!!! but not buying r1 anymore.. my insurance $1.7k!!! irritating!!! is like my 3 years super4 insurance...

 

Why would you wnat a R1 for?..S4 not good enough meh?

[theFamilyguy]

Hi Guys/Gals,

 

I'm planning to buy either S4 verS but i went to bike shop offer me Version R for $3.2K. anyone willing to share whether any major problems with Version R compared to Ver S? pretty new at 2A bikes here.thx alot for sharing.

[Ah Pek]

Hi Guys/Gals,

 

I'm planning to buy either S4 verS but i went to bike shop offer me Version R for $3.2K. anyone willing to share whether any major problems with Version R compared to Ver S? pretty new at 2A bikes here.thx alot for sharing.

 

There are no problem with any S4 type of version. The problem is with that particular bike you are buying. So far..most people I know..they seem to end up buying 2nd S4 with a problems. You do not know the bike as its new to you but the mototiam knows. Its their practice that you buy first, get your money first and got problem than talk later. Even if you comes back to them, its a "okay now" and if not.."its like that one". I have come across too much of this already. $3.2 k is a lot of money..prepare to spend more if you are not careful. Better to spend more on a really good condition one..get experience friend to help you look for one. The bike shop seller can out talk you anytime. Don't put on a baby face..but a "don't believe him" look when you talk to this people. BP is pretty honest with their sales..at least they do up the bike.

 

Good luck.

[rayhunter]

If this is after using X-1R..its nothing surprising. If you use the other one together we talk about in previous post above, you can say it's surprising..kekeke!

 

pek..me waiting for the improvement..

[Ah Pek]

pek..me waiting for the improvement..

 

Heh Ray!..how's your ride mannn? Btw.."Meowmeow" is looking for a tank bra..tot you might wanna sell her.