Jump to content
SingaporeBikes.com Telegram Now LIVE! Join NOW for the Last Reviews, News, Promotions & Offers in Singapore! ×
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

Recommended Posts

Posted
ah pek i go hunt around , my lcd problem can be fixed but 80 bucks lol.....i give up the idea liao , use as it is, the mech say burnt liao.....cause by intense sunlight

 

where and which bike shop repair for $80 . my one like going to burnt also . riding spec II

  • Replies 18.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted

ah pek.. im riding a version s.. everytime i ride.. about 15 mins to 20 mins. the temp light on the rpm meter will light up.. means very hot? but only ride for awhile? is it normal for the temp light to on...?

Posted
ah pek.. im riding a version s.. everytime i ride.. about 15 mins to 20 mins. the temp light on the rpm meter will light up.. means very hot? but only ride for awhile? is it normal for the temp light to on...?

 

 

No...this is REALLY BAD! But again, could be wiring problem. However, this is very serious. Need to have your coolant system check. See if there is any coolant left in your coolant reserve top up tank?..its on your right side mid area just below your seat but you have to remove your bike saddle and open the side panel cover with a size 5 allen key (unless its not stock).

 

If the coolant level is okay at betwen the markers..have to have your thermostat or radiator fan cjeck..radiator sensor fan switch may not be working or coolant pump out of commission. These possibilities are there. Need help if you don't have a trust worthy mototiam, pm me.:sian:

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
There are only the following things I can think of...

 

1) Check your rims..it may be damaged and not sitting the tyre properly.

 

2) If there is no sudden air leak due to a puncture by cuts to the tyre..do check the main axle of your wheels if it had been properly tighten...and also if your wheel bearings are ok.

 

3) Never heard of the tyre brand..better see to it, may not be the right fit tubless type for S4.

 

Mannn!...this is freaking dangerous!:faint:

 

 

Thanks thanks.. Thought the tire/rims problem too.. Yeah... thank GOD I am still ok.

 

Read somewhere in this forum that Ah Fook also does tire change/alignment? Any recommendation and cost?? thinking of changing the bearings at the same time.

 

Any comments on UM cost on tires? They are nearer to me in the west..

 

Thanks lots.. :)

Posted
Thanks thanks.. Thought the tire/rims problem too.. Yeah... thank GOD I am still ok.

 

Read somewhere in this forum that Ah Fook also does tire change/alignment? Any recommendation and cost?? thinking of changing the bearings at the same time.

 

Any comments on UM cost on tires? They are nearer to me in the west..

 

Thanks lots.. :)

 

Can't say much here..never been to UM before. As for bearings change, I think its $18 per set or so. Best to have Ah Fook look at your tyre and rim setup and get some free advise from him.:sian:

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted

im goin to ahfook soon for my sprockets n chain ..........

http://i162.photobucket.com/albums/t265/camounation/saLem77.jpg

MY RIDES

RXZ135 botoL powered / WR200 FMF powered - RXZ D CLUB

SUPER4 VTEC2 Micron powered - S4M

R1 '07 LE Akrapovic powered

HAYABUSA '99 Scorpion powered - SgBusaRiderz

SUPER4 PB1 / 125z Rockstar

RXZ135 Japan-modeL 6-speed lemang powered

 

carousell.com/shasalem.biz :D

Posted
im goin to ahfook soon for my sprockets n chain ..........

 

Sprocket set and X-ring DID should be about $200..let him know I told you.:sian:

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
Sprocket set and X-ring DID should be about $200..let him know I told you.:sian:

 

I was quoted 185 at republic..

 

Anw, ah pek, my eo change is due and im interested to try ap eo abd coolant flush.. Can pm me hw much?? I smsed u but u nv reply..

2005 aug - 2006 oct - Wave 125s FV4517M

2006 nov - 2007 jan - Super 4 Version s FP7529R

2007 jan - 2007 sept -spark 135 FBA3986G

2007 sep - 2010 apr - Honda XR400Sm FQ2901B

- Yamaha FZ150I

2010 apr - ????????? -Honda CB400 Spec I.III

-Yamaha FZ150I

Posted

He busy la bro... Now his AP EO and AP Coolant booming... Hehehe...

http://i648.photobucket.com/albums/uu205/ainyan090407/LVInfernalWar.jpg

http://i648.photobucket.com/albums/uu205/ainyan090407/3583_photo.jpg

Posted
I was quoted 185 at republic..

 

Anw, ah pek, my eo change is due and im interested to try ap eo abd coolant flush.. Can pm me hw much?? I smsed u but u nv reply..

 

 

You made appointment b4 but never turn up..what u wanna me to do? Not sure you are serious or one of those many that I come across from mototiam ppl asking for fun.:sian:

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
Can't say much here..never been to UM before. As for bearings change, I think its $18 per set or so. Best to have Ah Fook look at your tyre and rim setup and get some free advise from him.:sian:

 

Okok... thanks for the tips.. I will scout around... looking at the dunlop or the battelax tires... :) on a tight budget... Mrs complaining already.. :p

Posted

haiya forget now cnt suka suka meet ah pek liao...thursday 330pm i 530 must report work...a bit risky....pai seh...hmm nvm ah pek i will sms you the dates and time i can..den u see can slot into ur busy schedule not ba...thanks anw....

Posted
You made appointment b4 but never turn up..what u wanna me to do? Not sure you are serious or one of those many that I come across from mototiam ppl asking for fun.:sian:

 

No offence bro.. just tat i had to werk last min.. Paiseh...

2005 aug - 2006 oct - Wave 125s FV4517M

2006 nov - 2007 jan - Super 4 Version s FP7529R

2007 jan - 2007 sept -spark 135 FBA3986G

2007 sep - 2010 apr - Honda XR400Sm FQ2901B

- Yamaha FZ150I

2010 apr - ????????? -Honda CB400 Spec I.III

-Yamaha FZ150I

Posted
hi all! need your kind advice.. is there anyway to remove the carbon from my pipe??

 

Ride till red line. Thats all i know..

http://i648.photobucket.com/albums/uu205/ainyan090407/LVInfernalWar.jpg

http://i648.photobucket.com/albums/uu205/ainyan090407/3583_photo.jpg

Posted
No offence bro.. just tat i had to werk last min.. Paiseh...

 

In another post on the same day..you mentioned that a car scrape ur leg or something like dat on the way to my place here.:sian:

 

Anyway..at least have courtesy to call or sms me so that others can come into ur slot and I don't have to wait like a bloody fool. Not the first time you did enquiry anyway and not the first time this happened.

 

What have this to do with "no offfence"..not asking for an apolgy either but is damn heluvah unethical on ur part. Put urself in my shoes..u understand better.

 

I wanted to pm u actually but since u are not the only one..I want them to read this too. o_O

 

Amen!

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
Ride till red line. Thats all i know..

 

No need to ride lah..stationary then gradually rev up to red line and hold for a sec or two can liao but make sure ur eo is good or at least up to it.

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
No need to ride lah..stationary then gradually rev up to red line and hold for a sec or two can liao but make sure ur eo is good or at least up to it.

 

ah pek,

 

I realise i open my V-tec often at expressway and maintain at 7krpm my FC is better than riding at 90-100km/h at around 6 to 6.5krpm....

 

as I travel 80% expressway 20% normal road...

 

how come ah???

kekeke

:thumb:

Posted
ah pek,

 

I realise i open my V-tec often at expressway and maintain at 7krpm my FC is better than riding at 90-100km/h at around 6 to 6.5krpm....

 

as I travel 80% expressway 20% normal road...

 

how come ah???

kekeke

:thumb:

 

Heh Kano..am testing the new stuff liao..heee...x2!

 

I expained to most of you before that riding speed (90/100km/hr) of such do not dictate FC. Fc is a very subjective matter and one too many factors are invovle. Your case is without a doubt due to "momentum" in roll much like I advise most people to change gears above 4.5k rpm for 1st gear and 2nd gear onwards.at 5.5 krpm at least. This rolls the bike better into momentum and does contribute into less drag for the bike from stand still (its 358 lbs of mass). Not that everytime you have to do this, depend on traffic situation and regulate with the flow of traffics and Uncle Sam (men in White) but do it when there is that opportunity.

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Posted
Heh Kano..am testing the new stuff liao..heee...x2!

 

I expained to most of you before that riding speed (90/100km/hr) of such do not dictate FC. Fc is a very subjective matter and one too many factors are invovle. Your case is without a doubt due to "momentum" in roll much like I advise most people to change gears above 4.5k rpm for 1st gear and 2nd gear onwards.at 5.5 krpm at least. This rolls the bike better into momentum and does contribute into less drag for the bike from stand still (its 358 lbs of mass). Not that everytime you have to do this, depend on traffic situation and regulate with the flow of traffics and Uncle Sam (men in White) but do it when there is that opportunity.

 

icic thanks

 

wat new stuff?? share le.... :angel:

Posted

ah pek!!!! thnx for the help yesterday....for explainnig on y n how to do it...btw damn smmoooooooooooooottttttttttthhhhhhhhhhhhhhhh lah the bike nw......e scream b4 n after really got differece....thnx again :angel:

Posted
No need to ride lah..stationary then gradually rev up to red line and hold for a sec or two can liao but make sure ur eo is good or at least up to it.

 

thanks for the advice!! :)

Posted
ah pek!!!! thnx for the help yesterday....for explainnig on y n how to do it...btw damn smmoooooooooooooottttttttttthhhhhhhhhhhhhhhh lah the bike nw......e scream b4 n after really got differece....thnx again :angel:

 

 

Small matter my friend..u would done for me if things were the other way round :) Ride safe.

Stupid Hurts!.:giddy:Speed doesn't kill, mistakes does :faint:

BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • DAIS_ShellBAU2024_Motorcycle_SingaporeBikesBanner_300x250.jpg

     
×
×
  • Create New...