Jump to content
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

[Group] Super Four Non-VTEC Family: PB1 VerR & VerS


Recommended Posts

Originally posted by shahrul_azmil3@May 14 2006, 06:39 PM

my version s temp lite keep lighting itself up. Like at jb jam cannot on too long wait it lite up ... termostat i've change already ....

e thermostat isit 2nd hand oso? check ur thermostat connector isit shorted to ground.... if yes of coz e temp indicator n radiator fan will on continously

 

is ur coolant boiling when ur engine gets too hot? :confused:

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites
  • Replies 18.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Originally posted by gordy@May 15 2006, 12:51 AM

Hi guys,

 

Want to check with you what's your rpm when you are crusing at..

 

.. 80km/h?

.. 90km/h?

.. 100km/h?

 

please also state whether it's ver s, r or pb1.

 

Thanks

 

 

:cheeky:

cruising at 100km/h, rpm at 5.9k(ver s)

90km/h should b abt 5.4k.... not sure :sweat:

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites

no outings ?? overseas outings ??

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites

as requested...... here's e pic of e tail board, hope e owner dun mind :sweat:

 

 

from e pic u can see e tail board n e backlight is actually slanting similar to e spec3

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites
Originally posted by gordy@May 15 2006, 12:51 AM

Hi guys,

 

Want to check with you what's your rpm when you are crusing at..

 

.. 80km/h?

.. 90km/h?

.. 100km/h?

 

please also state whether it's ver s, r or pb1.

 

Thanks

 

 

:cheeky:

100km/hr - rpm 5.5

90km/hr - rpm 5

80km/hr - rpm 4.5

 

Ver S..

Philosophy A: Ignore what everyone else thinks. Riding is a better way to get around. Ride paranoid and keep your skills sharp

 

Philosophy B: Ride with somebody who's better than you. You will pick up a handy trick or new skill just about every time you are out

 

Philosophy C: You don't need a big bike to prove ur passion for riding

Link to post
Share on other sites

wow...the spec 3 tailight looooks coool man...but not rather clear in the pic...

 

cookie monster u have a side view of the pic....

 

Anyone knows which shop can do this for us...damn chio man

Yamaha TZM 150 => Honda Super 4 Version S => Yamaha Majesty 250 => Yamaha FZ6N => Aprilia Atlantic 200 => Suzuki GSXR400K

Link to post
Share on other sites
Originally posted by burningacid@May 16 2006, 05:20 PM

100km/hr - rpm 5.5

90km/hr - rpm 5

80km/hr - rpm 4.5

 

Ver S..

5.5k u can reach 100km/h.....? is ur engine stock? or u mod/overhaul ur engine?

hmm.... must be wif full system, i thk... :dot:

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites
Originally posted by super4newbie@May 16 2006, 05:54 PM

wow...the spec 3 tailight looooks coool man...but not rather clear in the pic...

 

cookie monster u have a side view of the pic....

 

Anyone knows which shop can do this for us...damn chio man

wait till u see his saitao..... i thk full package custom-made.

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites
Originally posted by super4newbie@May 16 2006, 05:54 PM

wow...the spec 3 tailight looooks coool man...but not rather clear in the pic...

 

cookie monster u have a side view of the pic....

 

Anyone knows which shop can do this for us...damn chio man

sorri bro

 

e side view oso cant reali see e tailboard..... no time to tak proper shots.

 

but it reali is slanting lik spec3 one.... perhaps e owner can share his photo himself :cheeky:

Current P200 setup: Sinnob Sproc[15, 39], NGK platinum plug with spark booster, V3 racing coil, cheetah CDI[dual mode], broquet B2, DIY oiler, hazard light, DIY gnding, PE28[pj-38, mj-120], open pod filter

Link to post
Share on other sites
Originally posted by burningacid@May 16 2006, 05:20 PM

100km/hr - rpm 5.5

90km/hr - rpm 5

80km/hr - rpm 4.5

 

Ver S..

that's nice..

 

care to share what tyre size you run on? sprocket size? and mods?

Phantom

Super 4 (Ver S)

Sparks

Ninja 636

Super 4 (Spec III)

Hornet 919

ZX-10R

GTV 250

Link to post
Share on other sites

cookie monster...

 

I think the owner must have done it in JB...the front sai tao has the race ferring lighting...and looks like its custom made like to ones in JB...I think maybe the owner can help...But im sure JB can do it...

Yamaha TZM 150 => Honda Super 4 Version S => Yamaha Majesty 250 => Yamaha FZ6N => Aprilia Atlantic 200 => Suzuki GSXR400K

Link to post
Share on other sites

Guys can I ask...I heard that if ya take the second link, you can hit a race track area before u hit the main JB...I heard there are a lot of bike shops for big bikes there...anyone knows where...

Yamaha TZM 150 => Honda Super 4 Version S => Yamaha Majesty 250 => Yamaha FZ6N => Aprilia Atlantic 200 => Suzuki GSXR400K

Link to post
Share on other sites

hi guys, just want to ask if anyone has changed their ver s signal lights to those of clear plastics from the vtec versions, issit even possible in the first place?

 

i tried out M400's led lights with the 1157 sockets, but wah lau eh, our ver s signal lights got an extra holder for the original filament bulb besides the orange casing, so cannot fit the led.

 

can anyone pls clarify if its possible to change our whole signal lights to those of the vtec versions? thanx!

Link to post
Share on other sites

tat bike mod head using scambler ones ... osram lights .... pretty nice but it's not bright for kampong areas. N somemore my mac says that bulb easy blow ones ....

 

the tail looks nice but the lights a bit odd .... too small for big naked bikes like s4 ..... but i think if the originals too X for me to buy ... I would do just tat ... moulding but using r1 taillights ....

 

But that only can be done when i got another bike or reservist call lar so can send bike to moulding.

 

The moulding would not be to expensive from what i know .

 

Rm 200 + - can get.

 

Coz from that pic it does not include undertray .... so he mould the back only.

 

The lights find yourself ar ...

 

What i see from one bike parts distributar .... leds tail light cost around Sing$120+- ...

 

I think i won't buy the originals ... I juz ask jb shop to do ... Same consept ... No one knows ....

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites

my bike (version s) has overheating problem since i bought this bike. I've done a lot of things still overheat.

 

My radiator 2nd hand

thermostat i dun have one. Remove not using. Machanic says it's alrite

flush my system myself.

 

Just now traval 110km/h constant

then the temp led lite up.

Went to jb top up petrol

 

Go back singapore

From singapore custom a bit jam

all the way my temp led lite up

even when i was traveling at tpe 90km/h constant.

 

So anyone pls help

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites

hi bros,

 

hi shahrul_azmil3 - haiz,i dun think i can help much. but is your block leaking or something? If ur block is leaking coolant like mine,maybe thats the problem. Pipe leakages? Maybe there is leakage thats why so?? The coolant cap? You have tHave you check the seal is it still servicable... Radiator not working properly? Second things might not work as perfectly as u have thought. Engine oil? How long have u since changed ur oil,old oil tend to heat up quickly...

 

Anyone of your went Pasir Gudang play before? Bcos i just went on tues...shiok..but now bike problem..so sad...And anyway,are your guys free this cuming friday? Maybe we can meet up at somewhere convenient for everybody...like Seletar Dam? , Orchard? , Beaches? Or..your suggest la...

 

 

Free on Friday(19 05 06) night (Pls add name and contact if u r free on this day)

1) superpig4 --- 94571641

http://photos.friendster.com/photos/60/26/3556206/36972573356419l.jpg

 

Things i had addon : Belly pan,Fork Brace,Voltage Stablizer(PowerMax2),Micron Legal Exhuast,AutoGauge Voltmeter,OKADA Crowling

 

Things i had changed : Red Handle Bar,Paintjob,Seat rewrap,Dunlop GPR70 tyres,Magnetic Coil,Clutch Plates,Valves Clearence and Timing chain,Front & Rear wheel bearings,Front fork service,carbon fibre mirror,carbon fibre brake & clutch level,K&N air filter,Gazi Rear Suspension

 

Things yet done : Front & Rear Number Plate(Yellow Base and Black Alphanumeric),Rim Respray,Rear Suspension Service,Chain and Spockets,3points Crashbar,Rear Hugger(arrow),Brake Calipers Respray,Side Stand,Front Wheel Brake Pad,Lizard Skin for Brake Lining and Rear Suspension Springs

 

Still Considering : Pro Taper Handle Bar,Rear Suspension Riser,Givi Rack and Box,Spec 1 or 3 Tail Board,Modify Header,Digital Meter,Clear Headlight(Spec3)

Link to post
Share on other sites
Originally posted by superpig4@May 18 2006, 04:25 AM

hi bros,

 

hi shahrul_azmil3 - haiz,i dun think i can help much. but is your block leaking or something? If ur block is leaking coolant like mine,maybe thats the problem. Pipe leakages? Maybe there is leakage thats why so?? The coolant cap? You have tHave you check the seal is it still servicable... Radiator not working properly? Second things might not work as perfectly as u have thought. Engine oil? How long have u since changed ur oil,old oil tend to heat up quickly...

 

Anyone of your went Pasir Gudang play before? Bcos i just went on tues...shiok..but now bike problem..so sad...And anyway,are your guys free this cuming friday? Maybe we can meet up at somewhere convenient for everybody...like Seletar Dam? , Orchard? , Beaches? Or..your suggest la...

 

 

Free on Friday(19 05 06) night (Pls add name and contact if u r free on this day)

1) superpig4 --- 94571641

2) shahrul_azmil3 --- 93399940 (sms only)

i really dun think there's any leakage what so ever. I check again ... Nothing. No green stuff anywhere near the block ... My reservoir still has coolant in it. Today somemore wired thing.

 

I have to report to camp due to ippt.

6am move off already

travel at tpe at a slow speed of 70km/h (no rush wat)

enjoying the cool breeze of the morning.

then see my temp led

it lights up but not bright ones. it's like someone playing with a bulb not conneting

properly to the batt. I did not even feel my engine warmness.

this all start to happen worst after going to machanic doing up some circuit.

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites

oh edyz i live in tampines .... friday is cuming up but only 3 ppl free ar ...

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites

shahrul i had the same problem before...the coolant pump of yours must be spoilt...the fan is not spinning so the coolant is not circulating in your bike...you can see that u ride for a while then your bike temp light is on but when you touch your radiator it is not hot at all....

 

better do this fast as it might damage your engine...if you dont soon your bike will start to leak engine oil...

 

new one about 150-160.....

Yamaha TZM 150 => Honda Super 4 Version S => Yamaha Majesty 250 => Yamaha FZ6N => Aprilia Atlantic 200 => Suzuki GSXR400K

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Direct Asia Motorcycle Insurance

×
×
  • Create New...