Suzuki Hayabusa

[shahrul_azmil3]

Hi!

My boyfriend owns an FJR and he keeps talking about whether he should change to a Hayabusa.. Right now I'm in the US for my studies and to surprise him for our anniversary, I'm trying to arrange for a 'bike exchange' session where he can try out a Hayabusa. If there's any one in this forum who wouldn't mind doing a little 'bike exchange' for a few hours? You could try out his FJR, or my little Vespa LX150 haha.. Just PM me if you might be interested.. thanks!!!

Tilt:)

 

Its kinda risky to do that. Now with lots of unmarked police vehical otr. Few hours? Wanna ride around singapore?

 

Sent from my GT-P1000 using Tapatalk

[kinwei]

Gen2 is a 4 pot calliper.

[kinwei]

For GPS mount, I made one myself cause I couldn't bear paying so much for a ram mount. Like this,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1512-03-53.jpg

 

and couple with a ebay purchased GPS holder, click me, and I got myself a GPS mount for less than $20.

[xXxAmiRxXx]

For GPS mount, I made one myself cause I couldn't bear paying so much for a ram mount. Like this,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1512-03-53.jpg

 

and couple with a ebay purchased GPS holder, click me, and I got myself a GPS mount for less than $20.

 

oh... now i know whats that for... i kept thinking to myself from that day when i saw it... hahaha...

[KyZre ZaChery]

Ebc rotor good? Any feedback plz?? If so i wana order too or chld go for galfer?

[shahrul_azmil3]

Ebc rotor good? Any feedback plz?? If so i wana order too or chld go for galfer?

 

Got money go for galfer lor. Tested n proven by many even pashnit dot com.

 

I will try ebc but not now. Maybe bonus time. Juz maybe.

 

Sent from my GT-P1000 using Tapatalk

[KyZre ZaChery]

Hmm.. Any idea whr to get or order da galfer?

[shahrul_azmil3]

Pashnit dot com

 

Locally , no idea

Brakings disc - unique

 

Price more or less the same.

 

Sent from my GT-P1000 using Tapatalk

[KyZre ZaChery]

Hmmm... Okies thx

[wayliang]

hey bro, if im not mistake gen2 is Mini 6pot... you can try go to youtube and search they will say it in the launching of the gen2 for the first time...

 

Gen2 is a 4 pot calliper.

er... lol. nvm think its ok. confusing sia. lol. maybe gen2 itself got 2 ver? lol!

[wayliang]

For GPS mount, I made one myself cause I couldn't bear paying so much for a ram mount. Like this,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1512-03-53.jpg

 

and couple with a ebay purchased GPS holder, click me, and I got myself a GPS mount for less than $20.

how you make one? make threads on the metal rod and screw it in or you just slot it in?

[kinwei]

er... lol. nvm think its ok. confusing sia. lol. maybe gen2 itself got 2 ver? lol!

 

No need to be confused. Gen2 only one version and using 4pot. Gen1 stock is 6pot.

[kinwei]

how you make one? make threads on the metal rod and screw it in or you just slot it in?

I attached a rubber spacer at the bottom. When I tighten the screw on the top, the rubber will expand and clamped against the inner circumference of the steering tube. I think it how RAM mount works as well. If I got time, I will take a photo of it alone.

[KyZre ZaChery]

Sorry gen 2 is within which year??

Edited October 16, 2011 by KyZre ZaChery

[kinwei]

Lol... Mine gen 2 front is twin 4 piston calliper n rear single 4 piston calliper..

err, rear is a 2pot calliper.

[fx110]

Sorry gen 2 is within which year??

 

starting K8 (2008) till present,L1 (2011).

[MERCENARY]

For GPS mount, I made one myself cause I couldn't bear paying so much for a ram mount. Like this,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1512-03-53.jpg

 

and couple with a ebay purchased GPS holder, click me, and I got myself a GPS mount for less than $20.

 

I am interested in making one like that.Is it possible for you to guide me on making it?

[kinwei]

I am interested in making one like that.Is it possible for you to guide me on making it?

 

Do you have access to a lathe and drilling/milling machine? If you have, then it is possible. I can then show you the step. Sorry I didn't mentioned the machines used in the first post.

[MERCENARY]

Do you have access to a lathe and drilling/milling machine? If you have, then it is possible. I can then show you the step. Sorry I didn't mentioned the machines used in the first post.

 

Not at the moment,will need to borrow the usage from my friend bike shop.I need to find out,cant remember he have or not.But he have the machine to make sliders.

But tested and proven vibration proof?

[World Misanthropy]

Hi, anyone selling their aftermarket slip-ons for Gen II? Or knows someone selling them?

 

Thanks!

[fazil1624]

Guys do you know any reliable workshop that service Hayabusa gen 2?

[wayliang]

No need to be confused. Gen2 only one version and using 4pot. Gen1 stock is 6pot.

haha. ok.

 

I attached a rubber spacer at the bottom. When I tighten the screw on the top, the rubber will expand and clamped against the inner circumference of the steering tube. I think it how RAM mount works as well. If I got time, I will take a photo of it alone.

 

Do you have access to a lathe and drilling/milling machine? If you have, then it is possible. I can then show you the step. Sorry I didn't mentioned the machines used in the first post.

ok. i have. but in my camp. so if possible can roughly show me then i try to figure out myself?

i have a holder but i got no where to clamp. -_-..

[shahrul_azmil3]

Guys do you know any reliable workshop that service Hayabusa gen 2?

 

Usually for engine service, i service my bike at tachyon or ah lai. Tyres would be hkl or if i want to do the bike quick. Unique or hl cycle for engine oil, spark plug replacement.

 

Sent from my GT-P1000 using Tapatalk

[kinwei]

Not at the moment,will need to borrow the usage from my friend bike shop.I need to find out,cant remember he have or not.But he have the machine to make sliders.

But tested and proven vibration proof?

 

The machine used to make slider are lathe machine. It is actually enough. If you don't have Milling/drilling machine, then you have to forsake some steps but it is still possible.

 

Frankly speaking, I don't use GPS much. So I seldom use my mounting hence I don't want to spend too much money on a ram mount. The furtest I tested it is around 100km+ of flat road. So not much vibration at all. Otherwise I am unable to comment much. I'll post a write up on how to make the mount in a while.

[kinwei]

Ok, I thought of doing this write up for those who might be interested to fabricate the GPS mount yourselves. But do take note, this is just a bar mount. You still have to purchase a cheap China made GPS mount in EBAY to complete it.

 

There are a total 4 items,

 

1) Bar beam using Dia 19mm alu rod

2) Support stem using Dia 19mm alu rod

3) Rubber expander. I got this from my original DRZ axle sider. The dimension is dia.13mm x 14mm. It has an 5mm hole in the center also.

4) A cap screw of M5x65mm and a M5 nut

 

I have snap a photo of the actual part with it respective drawing with dimension. I will label some dimension with numbering to explain the process needed.

 

 

First of all the Bar beam,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1715-22-59.jpg

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1714-20-58.jpg

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1714-21-18.jpg

 

 

No. 1 - Use a M8.5 drill bit to drill a depth of 6mm

No. 2 - Use a M5 drill bit to drill through

No. 3 - Use a M12 drill bit or mill bit to drill this hole

No. 4 - For this step, you have to mill it

 

Secondly for the Support stem,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1715-29-56.jpg

 

No. 1,2,3 - Can be done by using lathe machine

 

Lastly, you can start assembling all the parts and will look like this,

 

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1708-30-33.jpg

http://i171.photobucket.com/albums/u311/mark13x/C360_2011-10-1708-29-41.jpg

 

I hope this not confusing as I am not really good with words. I hope this will help.