[Group] YAMAHA Fazer

[betterDees]

Looks good... i went to google abt it... its pricey...

 

http://www.yamaha-motor.ca/accessories/accessory_details.php?item=4964&group=M&model=3578

 

Woo 100 bucks.. Myb inspection also cannot clear ... Sigh ..

[maruzounaki]

was at MW just now in the afternoon..any brothers went there? saw 2 fazers just now.

[d3an_cain]

I just wanna ask the lao jiaos here what arethe pros and cons of fz1s... Just wan to know what to expect when i buy one...

 

Pros- good power delivery when u need it.. Lightweight n great for conering

Cons- unless u get a box on the bike, bringing ur helmet around everyday make u sian..

[muahahahaz]

Pros- good power delivery when u need it.. Lightweight n great for conering

Cons- unless u get a box on the bike, bringing ur helmet around everyday make u sian..

 

Haha i think the cons is the same for all bikes...

[dragonforce]

Pros- good power delivery when u need it.. Lightweight n great for conering

Cons- unless u get a box on the bike, bringing ur helmet around everyday make u sian..

 

at 200kg i wouldnt say its light, i guess its average.

buy naked bike should put bike mah, if not wasted.

to me naked bikes like the fz series pros and cons are similiar..

more comfortable than a sportsbike but not as powerful and heavier as well.

lighter and more sporty engine than a pure tourer but probably less comfy.

a better daily commuter for traffic here compared to both.

[eFzek17]

soldsoldsoldsold

Edited August 3, 2011 by eFzek17

[Fredd]

wah bro..juz buy den sell alrdy..wad happen? changing bike uh? hahahaha

 

FZ1 Gen2 bros.

 

Anyone interested in Brand New Yamaha Replica Belly Pan shipped over from overseas. Just collect it just now. Yet to to be sprayed. bought $250. Letting go at $230. interested text me at

 

9oneone ninenine5 8zero.

 

Thanks.

[thirty7dsg]

Upz for your sales!!

 

FZ1 Gen2 bros.

 

Anyone interested in Brand New Yamaha Replica Belly Pan shipped over from overseas. Just collect it just now. Yet to to be sprayed. bought $250. Letting go at $230. interested text me at

 

9oneone ninenine5 8zero.

 

Thanks.

[thirty7dsg]

Hi all, juz to check anyone could advise me on the procedure of getting my 2nd hand aftermarket exhaust inspection for approval? Thanks!!

[ssk]

hi, guys, recently i experience a error code 46. i was quote by a motorcycle shop for 1200 for the starter motor and a new battery. is this a reasonable price? any shop to recommend?

[spaiduhz]

hi, guys, recently i experience a error code 46. i was quote by a motorcycle shop for 1200 for the starter motor and a new battery. is this a reasonable price? any shop to recommend?

 

Isn't code 46 an indication that the rider is riding too aggressively on public roads? The valentino rossi code.

[muahahahaz]

Hi all, juz to check anyone could advise me on the procedure of getting my 2nd hand aftermarket exhaust inspection for approval? Thanks!!

 

I think can bring to vicom straight and say u wanna do pipe inspection... I did that when i got my super 4 with aftermarket pipe. Basically when there is a change of owner for the pipe need to go for inspection... Correct me if i am wrong

[PaLmEr]

hi, guys, recently i experience a error code 46. i was quote by a motorcycle shop for 1200 for the starter motor and a new battery. is this a reasonable price? any shop to recommend?

 

Code 46 = Power Supply to the fuel Injection Relay is not normal.

 

Likely to be connection problem or battery or rectifier.

[swat_]

Hi all, juz to check anyone could advise me on the procedure of getting my 2nd hand aftermarket exhaust inspection for approval? Thanks!!

 

http://www.singaporebikes.com/forums/showthread.php/171698-Aftermarket-Exhaust-Inspection-Procedures

[kevin]

hi, guys, recently i experience a error code 46. i was quote by a motorcycle shop for 1200 for the starter motor and a new battery. is this a reasonable price? any shop to recommend?

 

 

What the various codes mean:

01 - Throttle position sensor signal

02 - Atmospheric pressure Displays the atmospheric

03 - Intake air pressure Displays the cylinder-#1

05 - Intake air temperature Displays the intake air temperature.

06 - Coolant temperature Displays the coolant temperature.

07 - Vehicle speed pulse 0–999 Check that the number

08 - Lean angle sensor Remove the lean angle

09 - Fuel system voltage

20 - Sidestand switch Set ON/OFF the sidestand

21 - Neutral switch Set ON/OFF the neutral

30 - Cylinder-#1 ignition coil Actuates the cylinder-#1 ignition

31 - Cylinder-#2 ignition coil Actuates the cylinder-#2 ignition

32 - Cylinder-#3 ignition coil Actuates the cylinder-#3 ignition

33 - Cylinder-#4 ignition coil Actuates the cylinder-#4 ignition

36 - Injector #1 Actuates the injector #1 five

37 - Injector #2 Actuates the injector #2 five

38 - Injector #3 Actuates the injector #3 five

39 - Injector #4 Actuates the injector #4 five

48 - Air induction system solenoid

50 - Fuel injection system relay Actuates the fuel injection

51 - Radiator fan motor relay Actuates the radiator fan

52 - Headlight relay Actuates the headlight relay

53 - Exup servo motor Actuate the servo motor turns

56 - Sub-throttle servo motor Actuate the servo motor turns

60 - EEPROM fault cylinder No

61 - Malfunction history code

62 - Malfunction history code

63 - Malfunction code reinstate

 

And here are the ECU error codes

11 - Cylinder identification sensor

12 - Crankshaft position sensor

13 - Intake air pressure sensor

14 - Intake air pressure sensor hose line

15 - Throttle position sensor (open or short circuit)

16 - Throttle position sensor (stuck)

17 - EXUP servo motor potention circuit

18 - EXUP servo motor (stuck)

19 - Sidestand switch (open circuit in the

20 - Intake air pressure sensor or atmospheric

21 - Coolant temperature sensor

22 - Intake air temperature sensor

23 - Atmospheric pressure sensor

24 - O2 sensor No normal signal is received from the O2 sensor.

30 - Lean angle sensor (latch up detected)

33 - Cylinder-#1 ignition coil

34 - Cylinder-#2 ignition coil

35 - Cylinder-#3 ignition coil

36 - Cylinder-#4 ignition coil

39 - Injector (open circuit)

41 - Lean angle sensor (open or short-circuit)

42 - Speed sensor No normal signals are received from the speed sensor.

43 - Fuel system voltage (monitoring voltage)

44 - Error in writing the amount of CO adjustment

46 - Vehicle system power supply

47 - Sub-throttle servo motor potention (open

48 - Monitor the operation of the sensors and

48 - Sub-throttle servo motor (lock)

50 - ECU internal malfunction (memory check error)

[kevin]

 

Bought this Muc-Off Degreaser from MW. Indeed an excellent product that thoroughly cleaned the rim & underneath the engine dirtied by the chain lube.

[aRcHeR]

What the various codes mean:

01 - Throttle position sensor signal

02 - Atmospheric pressure Displays the atmospheric

03 - Intake air pressure Displays the cylinder-#1

05 - Intake air temperature Displays the intake air temperature.

06 - Coolant temperature Displays the coolant temperature.

07 - Vehicle speed pulse 0–999 Check that the number

08 - Lean angle sensor Remove the lean angle

09 - Fuel system voltage

20 - Sidestand switch Set ON/OFF the sidestand

21 - Neutral switch Set ON/OFF the neutral

30 - Cylinder-#1 ignition coil Actuates the cylinder-#1 ignition

31 - Cylinder-#2 ignition coil Actuates the cylinder-#2 ignition

32 - Cylinder-#3 ignition coil Actuates the cylinder-#3 ignition

33 - Cylinder-#4 ignition coil Actuates the cylinder-#4 ignition

36 - Injector #1 Actuates the injector #1 five

37 - Injector #2 Actuates the injector #2 five

38 - Injector #3 Actuates the injector #3 five

39 - Injector #4 Actuates the injector #4 five

48 - Air induction system solenoid

50 - Fuel injection system relay Actuates the fuel injection

51 - Radiator fan motor relay Actuates the radiator fan

52 - Headlight relay Actuates the headlight relay

53 - Exup servo motor Actuate the servo motor turns

56 - Sub-throttle servo motor Actuate the servo motor turns

60 - EEPROM fault cylinder No

61 - Malfunction history code

62 - Malfunction history code

63 - Malfunction code reinstate

 

And here are the ECU error codes

11 - Cylinder identification sensor

12 - Crankshaft position sensor

13 - Intake air pressure sensor

14 - Intake air pressure sensor hose line

15 - Throttle position sensor (open or short circuit)

16 - Throttle position sensor (stuck)

17 - EXUP servo motor potention circuit

18 - EXUP servo motor (stuck)

19 - Sidestand switch (open circuit in the

20 - Intake air pressure sensor or atmospheric

21 - Coolant temperature sensor

22 - Intake air temperature sensor

23 - Atmospheric pressure sensor

24 - O2 sensor No normal signal is received from the O2 sensor.

30 - Lean angle sensor (latch up detected)

33 - Cylinder-#1 ignition coil

34 - Cylinder-#2 ignition coil

35 - Cylinder-#3 ignition coil

36 - Cylinder-#4 ignition coil

39 - Injector (open circuit)

41 - Lean angle sensor (open or short-circuit)

42 - Speed sensor No normal signals are received from the speed sensor.

43 - Fuel system voltage (monitoring voltage)

44 - Error in writing the amount of CO adjustment

46 - Vehicle system power supply

47 - Sub-throttle servo motor potention (open

48 - Monitor the operation of the sensors and

48 - Sub-throttle servo motor (lock)

50 - ECU internal malfunction (memory check error)

 

Erm.. Error 51 is mobiliser issue...

[hondawavefan]

[ATTACH=CONFIG]213070[/ATTACH]

 

Bought this Muc-Off Degreaser from MW. Indeed an excellent product that thoroughly cleaned the rim & underneath the engine dirtied by the chain lube.

 

I also bought this and I have to agree with you that it is a good product.

[Yatz86]

hi, guys, recently i experience a error code 46. i was quote by a motorcycle shop for 1200 for the starter motor and a new battery. is this a reasonable price? any shop to recommend?

 

sounds too ex for a startor motor and a battery imo...

 

mine wasnt that ex when i replaced the starter motor and battery...

 

best go HL...but i did mine at k&t...cause HL waiting time can

Edited August 1, 2011 by Yatz86

[tancy]

Hi,

Anyone knows roughly the price of trading with a 2nd hand arrow endcan with midpipe with stock endcan ?

[Jonborah]

Hi guys, anyone selling or knows where i can buy Fazer headlights like the one in the picture? (the yellow fazer)

 

http://connect.in.com/yamaha-fazer/wallpapers-543174-5557153.html

[SiaoSter]

Hi,

Anyone knows roughly the price of trading with a 2nd hand arrow endcan with midpipe with stock endcan ?

 

 

i dont think there are trading in of exhaust for another in shops....unless its thru private selling and the other owner needs ur stock exhaust after selling you his aftermarket ones...

[skateboy]

someone missed me? anyway these days reservist la.. reservist is my holidays & also my sleep days.. hehehe! today i go picked up my sargent seat & go bikewerks kpo.. hehehe! next tue or thu i'll go there again, for servicing..

how much u got the sargent seat for? and wat is ur considerations for a sargent over corbin? i'm oso considering aftermarket seat n need more feedbacks b4 making decision.

[Awin]

Anyone here know where us sporting cycle motodiam?

[Jonborah]

Hi guys, anyone selling or knows where i can buy Fazer headlights like the one in the picture? (the yellow fazer)

 

http://connect.in.com/yamaha-fazer/wallpapers-543174-5557153.html

 

more specifically, i'm looking for headlight for FZ6N. anyone knows where i can get?