Harley Riders gather

[ah_veo]

Guys....letting go my '08 RoadKing. anyone interested, pls view at Garage folder. thanks.

[stwb1981]

Does that include labor to install the 6 speed? $k is a bit steep to have the extra gear imho. On my 96ci, I really dont use the 6th gear until over 120kph, but thats a different bike.

 

Yup it is steep....

est S$4k just to deliver to Singapore only...

 

Pricing exclude shipping is already USD$2500+

 

Tempting...

I can get another spare bike with that $$$ ...lol

 

hmmm.....

[jeffrey80]

hi ah_veo, mmm nice RK u have there but does it comes with the cute little gal ??

[jeffrey80]

Guys....letting go my '08 RoadKing. anyone interested, pls view at Garage folder. thanks.

 

 

hi ah_veo, mmm nice RK u have there but does it comes with the cute little gal ??

[lunloon]

hi ah_veo, mmm nice RK u have there but does it comes with the cute little gal ??

 

http://1.bp.blogspot.com/_f3SZ5Tu916o/S8oMjXM7bVI/AAAAAAAAQfA/WHq5GqoU3vA/s1600/pedobear.png

[TWdude26]

Nice Helmet there.

Comtemplating to get a Bell Shorty from "thebellshop" online. As it seems to be the only reliable brand.

Mind sharing where you get info on the Scorpion Expo??

I oso looking for this exo online sometime back... after seeing the helmet at motoworld.

But ended up getting the HJC IS-2 instead, same half helmet with sunshade but I find with better built.

[TWdude26]

Yup it is steep....

est S$4k just to deliver to Singapore only...

 

Pricing exclude shipping is already USD$2500+

 

Tempting...

I can get another spare bike with that $$$ ...lol

 

hmmm.....

Tats a lot of $$$ for an overdrive gear tat u'll not use bery often in SG imho...

[stwb1981]

Tats a lot of $$$ for an overdrive gear tat u'll not use bery often in SG imho...

 

Yup , can get more stuff with that $$$...tricky...lol

[Eastsider_Rider]

Can someone pm me where's the shop address that service Harley at Sim Ming?

Edited November 17, 2010 by Eastsider_Rider
Type wrong add

[stwb1981]

It is Combine Motor....

Located on the 2nd floor of Sin Ming Auto Point...

which house quite a number of car workshop, some bike repair shop & not forgetting the notorious Evershine (Agent for Kawasaki)lol

[TWdude26]

Just finished wiring up the USB charger thingy for my iphone. Oso rewired my IU to the same supply which oni turn on after I turn the key. No more worry of the IU draining my batt if never start for long period if tat actually matters...

[TWdude26]

Guys, care to share if u follow the tyre pressure stated in the manual? TIA

[stwb1981]

Just finished wiring up the USB charger thingy for my iphone. Oso rewired my IU to the same supply which oni turn on after I turn the key. No more worry of the IU draining my batt if never start for long period if tat actually matters...

 

It does matter mate...

my colleague R1 was drained of battery due to a stupid erp signal nearby (I see none though) so he has his cardcard inside & beep thruout as his card value is low thus resulting in a drain battery...

sure 1 damn unlucky guy...

other than tat, not much of a issue...

 

Guys, care to share if u follow the tyre pressure stated in the manual? TIA

 

I Confirm nv follow......lol

[tigertgr]

Sppp alll...

 

What kind of labour charges should i be expecting for a non agent shop to do a full exhaust swap? (header+muffler) ..

 

cheers

[stwb1981]

Sppp alll...

 

What kind of labour charges should i be expecting for a non agent shop to do a full exhaust swap? (header+muffler) ..

 

cheers

 

Well...

Depends on what kind of shop U go to....

 

Diff shop diff prices...

My $$$ is on Sunbrust @ AMK confirm...lol

 

Any way it a better choice than doing it at the agent....

[liaw]

Can someone pm me where's the shop address that service Harley at Sim Ming?

Sim Ming Auto care, Blk 176 #02-21

shop name: combine motor, look for machanik call ah hock

[Dnish]

Well...

Depends on what kind of shop U go to....

 

Diff shop diff prices...

My $$$ is on Sunbrust @ AMK confirm...lol

 

Any way it a better choice than doing it at the agent....

 

+1. I wouldnt go with the cheapest. Find a shop that will work with you. Especially when it comes time for inspection as no way a complete header+exhaust will pass.

 

Also, have you done a airfilter change? Might want to consider doing both to get the most from the better exhaust. Also, if its EFI, will need to remap. So thats why find a good shop who can recommend good overall packages.

[Dnish]

Guys, care to share if u follow the tyre pressure stated in the manual? TIA

 

I would go with whats in the manual, but a few lbs over should be ok. One indie mechanic said to go to 60 lps to get better gas mileage. I shuddered to think what would happen if going 150 kph and blows out beause of overinflated...

[Dnish]

Funny. after seeing the HJC IS2, I decided to go with the Exo. They are pretty similar. But I did get the CLST for $100. Best FF helmet for the $$.

 

Found the reviews on HD Forums.

[tigertgr]

+1. I wouldnt go with the cheapest. Find a shop that will work with you. Especially when it comes time for inspection as no way a complete header+exhaust will pass.

 

Also, have you done a airfilter change? Might want to consider doing both to get the most from the better exhaust. Also, if its EFI, will need to remap. So thats why find a good shop who can recommend good overall packages.

 

Yea... agree... but been new to the Harley scene ... not too sure who to go with... lol.. agree too that usually stage 1 set up should be the done together ( exhaust, intake and remap)

 

but long story short ... i wanted a little more sound than the stock exhaust. So actually decide on a 49 state pipe.. but i wanted it black.

 

So happens that a mate is coming back from the states , and are willing to hand carry the shite for me.. lol.. thus decided to get the whole set in black. (SE headers/Buckshot heat Shield/Se Slip ons)

 

Hopefully it wouldnt back fire too badly ... if it does.. i guess i will just slap on the intake and remap.

 

and yes.. i know it will be lta approve... but being a new bike.. i have 3 years to enjoy it b4 worrying abt it..

 

thanks for the input!

cheers

[TWdude26]

It does matter mate...

my colleague R1 was drained of battery due to a stupid erp signal nearby (I see none though) so he has his cardcard inside & beep thruout as his card value is low thus resulting in a drain battery...

sure 1 damn unlucky guy...

other than tat, not much of a issue...

 

 

 

I Confirm nv follow......lol

wah... wat an unlucky day for him...

tats y i rewired it just in case the IU goes berserk...

 

I would go with whats in the manual, but a few lbs over should be ok. One indie mechanic said to go to 60 lps to get better gas mileage. I shuddered to think what would happen if going 150 kph and blows out beause of overinflated...

u meant 60psi?

40psi already bery hard... where is he working? i better siam...

 

Funny. after seeing the HJC IS2, I decided to go with the Exo. They are pretty similar. But I did get the CLST for $100. Best FF helmet for the $$.

 

Found the reviews on HD Forums.

haha... tat explains y no 2 harleys r alike... everyone hv diff taste for things...

[stwb1981]

Yup Harley is a lifestyle mates....

Different ppl different lifestyle thus different taste...lol

 

Still searching for side panniers....

Getting on my nerves....

[Dnish]

Yea... agree... but been new to the Harley scene ... not too sure who to go with... lol.. agree too that usually stage 1 set up should be the done together ( exhaust, intake and remap)

 

but long story short ... i wanted a little more sound than the stock exhaust. So actually decide on a 49 state pipe.. but i wanted it black.

 

So happens that a mate is coming back from the states , and are willing to hand carry the shite for me.. lol.. thus decided to get the whole set in black. (SE headers/Buckshot heat Shield/Se Slip ons)

 

Hopefully it wouldnt back fire too badly ... if it does.. i guess i will just slap on the intake and remap.

 

and yes.. i know it will be lta approve... but being a new bike.. i have 3 years to enjoy it b4 worrying abt it..

 

thanks for the input!

cheers

 

Thats cool. If they are willing to carry it back for you, you owe them more than a few drinks. I bought a paid of shocks from the states and put them in my checked luggage. They have a scanner before you go to the check in counter. They thought I was carrying a rocket launcher. HahA

 

I would just go to a shop that is close to you. All the ones listed here are reputable and will do a fine job if you make it clear you plan to use them going forward. They need your business. For me. I am going to VTwins Performance as its a few blocks from where I live (Hillview Area) and they seem to be good.

[Dnish]

For Sale. Rhineharts Slip on mufflers. Will fit 2006 onwards Dynas. They sound awesome and if you pair it with a stage 1 (airfilter), then will get more hp. But will also need a tuner (SERT or PCIII). Stock is about 60 hp, after stage 1 and PCIII had it Dyno'd at low 80hp. If you commit now, will let go for $300. First offer takes them. Otherwise, will be on consigment at Twins Performance. Will attach photo shortly.

 

Am replacing with Bassani road rage 2-1 exhaust. (Wish I had the above poster's buddy to carry mine from Cali...)

[tigertgr]

Thats cool. If they are willing to carry it back for you, you owe them more than a few drinks. I bought a paid of shocks from the states and put them in my checked luggage. They have a scanner before you go to the check in counter. They thought I was carrying a rocket launcher. HahA

 

I would just go to a shop that is close to you. All the ones listed here are reputable and will do a fine job if you make it clear you plan to use them going forward. They need your business. For me. I am going to VTwins Performance as its a few blocks from where I live (Hillview Area) and they seem to be good.

 

LOL... yea... i would imgine ..airport peeps will be going crazy looking that all the tubing and metal parts... thanks for the tip... i guess have to pay some money to see which mech that i can click better... the usual thing that one have to go thur..