VFR General Enquiry Thread

[Roger1605198916]

the instructions for vfr800 vtec are included in the article that roger posted up.

 

"The adapter kit for the VFR contains a longer replacement mushroom head bolt and spacer.... blah blah blah"

 

thanks bro

[BlackBandit]

Haiyah, never read the second page, although it did not specifically state it's for the VTEC models.

 

Anyhow, single injector works fine for me.

[loufu]

Roger{;4628582']damages arh......

it depend on which brand, izzit customise, how many function bah bah bah etc.......

there are lots of brand to choose from:

Ohlins

Hyperpro

Bitubo

WP

Technoflex

Wilber

pensek (if not Wrong)

 

Good luck in finding

 

shd b penske i think..

[sino74]

yesterday after a GO NO GO situation kind of traffic ,

I finally reached my destination.Before parking , I noticed e temp. reading is 113 degrees celcius.

After I switch OFF e ignition , can be heard from e left side of e farring from

radiator side , water boiling .

My question is..is this normal ?

Hope someone can clarify.

Tx in advance.

[minime]

Using it on my ride. When you get the full oiler set, there are attachments specifically for VFR. The shop will install this for you. Do note that it is rather tedious. Ah Keong at HKL took 1/2 day to install mine. Kudos to him cos he made sure that the needle is nicely positioned & everything is tip-top.

 

I recommend you go HKL (if you haven't got it yet) and get Ah Keong to install.

 

Been riding with the oiler for more than 11,000 km. My chain is still shiny and no need for adjustments yet.

 

Thanks guys for the replies!

[CKC]

yesterday after a GO NO GO situation kind of traffic ,

I finally reached my destination.Before parking , I noticed e temp. reading is 113 degrees celcius.

After I switch OFF e ignition , can be heard from e left side of e farring from

radiator side , water boiling .

My question is..is this normal ?

Hope someone can clarify.

Tx in advance.

 

113

never had tat high ever

max is 105 b4 the fan starts to work

not sure about the rest

did you check your spare ?

change your coolant ?

[sino74]

113

never had tat high ever

max is 105 b4 the fan starts to work

not sure about the rest

did you check your spare ?

change your coolant ?

 

yet to check ma spare.

btw can i just top-up with any coolant if its at e low level?

if i am to have flushing of radiator ,

any recommendations motoshop

n whats e average cost ?

tx in advance.

[BlackBandit]

yet to check ma spare.

btw can i just top-up with any coolant if its at e low level?

if i am to have flushing of radiator ,

any recommendations motoshop

n whats e average cost ?

tx in advance.

 

Last I did for my Blackbird at HKL was about $60 (I think). It should be around that ballpark figure. If not, you can try Unique Motorsports which distributes Engine Ice.

[sino74]

Last I did for my Blackbird at HKL was about $60 (I think). It should be around that ballpark figure. If not, you can try Unique Motorsports which distributes Engine Ice.

 

ya , bro.

did called up Unique n was quoted S$80.flushing n top-up engine ice.

at e mmt , no stock.stock will only arrive week after next.

i'll be goin down to Defu branch then.

 

btw , Happy Bornday ,bro BlackBandit.

MAY ALL UR WISH COME TRUE...

[BlackBandit]

Hahahahaha!!!

 

Thanks dude...

[sino74]

yesterday after a GO NO GO situation kind of traffic ,

I finally reached my destination.Before parking , I noticed e temp. reading is 113 degrees celcius.

After I switch OFF e ignition , can be heard from e left side of e farring from

radiator side , water boiling .

My question is..is this normal ?

Hope someone can clarify.

Tx in advance.

 

113

never had tat high ever

max is 105 b4 the fan starts to work

not sure about the rest

did you check your spare ?

change your coolant ?

 

yet to check ma spare.

btw can i just top-up with any coolant if its at e low level?

if i am to have flushing of radiator ,

any recommendations motoshop

n whats e average cost ?

tx in advance.

 

ok . high temperature problem solved !

thought of just do with flushing n replacing the radiator & coolant

but end up do with other servicing.

guess what , coolant in e spare reservoir tank was @ LOW level.

no wonder e temp. goes up as high as 114degree celsius.!

now e temp. reading goes up e most 103degree celsius e most.

[Blues]

Anyone knows if a vtec pillon grips can fit on a pre-vtec one?

[CKC]

Anyone knows if a vtec pillon grips can fit on a pre-vtec one?

 

 

Think both are different in shape and mounting points.

[quizesilver]

Dear bro,

 

I have been ask to gather all interest grp within Sport Tourer with al-simmons

 

I am here to let all know about this

http://www.singaporebikes.com/forums/showthread.php?t=206377

http://i231.photobucket.com/albums/ee289/SingaporeBikes/Events/NBW2008/NBW2008.jpg

 

In your individual grp.

I have requested some to assist me as the POC.

 

AT

edouard_g -

 

BMW

coolcat

 

Deuville

vesparazz

 

Fazer

racingter

xgrind

 

FJR1300

Kazky

deanz4

 

GTR 1400 and ZX14

kaozie

neo

 

Hayabusa

quizesilver

Nok97

 

ST11/X

Simon Soh

Yzf_R1

 

TDM900 and Diversion 900

AJ..

Custom

 

Varadero

Don Didie

ATwin

 

VFR

vfrT

Throttlestop

 

V-strom

al-simmons

cstay66

[BlackBandit]

National Biker's Weekend??? Is there gonna be wet t-shirt contests???

[quizesilver]

National Biker's Weekend??? Is there gonna be wet t-shirt contests???

 

haha

that is quite interesting.

i dun noe the "details"

[Roger1605198916]

hmmmmmmm than think it's the time that VFR muct show our true-self to the open public liao hahahahaha :D

[Roger1605198916]

Anyone knows if a vtec pillon grips can fit on a pre-vtec one?

 

no it dun fit

[Blues]

Roger{;4655004']no it dun fit

 

Sigh... I prefer the vtec version pillon grabs then the 2001.

 

It is just the mounting points that are different?

 

 

Oh, btw, recently when I accelerate, the RPM does not generate the power expected, high rev but does not translate to power.

- originally, only need to clutch in a bit, I will hit the biting point (which I find weird as it is too near to full clutch out, plus no free-play)

 

Went to Looi's (at closing time, which I really appreciate their good service attitudes) and they had kindly helped to have a look and release some pressure.

- after the pressure is released, the biting point is mid-way between full clutch in/out

 

Is this indicative of a worn/burnt out clutch plates? Any idea on the costs of replacement for pre-vtec?

[quizesilver]

Roger{;4654994']hmmmmmmm than think it's the time that VFR muct show our true-self to the open public liao hahahahaha :D

 

haha ya do gather all.

[bt]

hey quize. long time no see, what bike ya riding now?

[quizesilver]

hey quize. long time no see, what bike ya riding now?

haha wah kenna spotted at here ah.

 

look at my siggy

 

see that u have upgraded too.

 

ride safe

see u on the road too !

[sino74]

bros , at times , i do hear 'tink tink ' kindda sound near to e left fairing

when i move off from stationary ? dont know how to explain exactly.

any idea ?

whats e ideal moving on temp. after u warm-up ur bike ?

 

btw , CKC or any bros , where to get that kindda side panniers as in CKC signature ? it looks 'slick'

[floppy]

btw , CKC or any bros , where to get that kindda side panniers as in CKC signature ? it looks 'slick'

 

those are the original side panniers.

can get them from any shops as long as they are willing to order for you.

about 1.5k+

[seahmh]

Hi,

 

I know this topic of light bulbs has been asked before. But I don't have the luxury of time to go back page by page to search the history.

 

So mind if I ask what type of STREET LEGAL (NOT those type of the white-colour superb bright light bulbs) light bulbs are you guys using for your NORMAL head-lights (NOT the high-beam or the two small bulbs below the head-lights which I don't know the name for these two little bulbs)??

 

My mechanic only has those very very normal "yellowish light" type of bulbs which both blew after a month. I went back to change them and both blew after a month again. I asked them whether they have the original Honda ones, they do not have, thus I am thinking of getting a pair of Philips STREET LEAGL bulbs or Osram brand. Heard such bulbs which costed around S$80 - S$100+ a pair is more long-lasting.

 

I heard from a friend that Osram brand DO NOT have street legal light bulbs, is it true??

 

If yes, guess I can only buy Philips bulbs...

 

I did come across a thread in Garage sales selling Philips bulbs, I can't remember the name of the bulbs the guy is selling. The bulbs has a fanciful name.

 

So mind if I ask what sort of the Philip bulbs are street legal? Also correct me if I am wrong, our normal head-lights is a H7 bulb, right?? Where can I get such street legal Philips bulbs?? Mustafa??

 

Thanks very much in advance for any advice.

 

If my enquiry here seemed stupid and you don't feel like replying, it's okay, but appreciate no flamings. Thank you.