CBR150R Riders, Join us now!

[xXxRatedxXx]

shiok sia! Hahaha! How much OTR?

 

$10.5K

 

10 char

[limbat]

Np uncle lim. Will be there tml after i meet my client ! Around afternoon time.

 

Thks mate - see you later ..... going into JB-Skudai soon .....

 

 

$10.5k 10 char

 

Is this bike also made in Thailand ? Class 2B rider still cant buy this ley....

[d0n]

ON.................laaaaaa

 

@fishy............. ring ring .... ring ring ..... i need help again on the rear PC....... Don buying KOPI for U & I will get TEH-SI siew tai........

 

lai ah lai ah~

who wants to head down to uncle lim's place w/ me later? hehe

buy kopi no problem~

 

Got a chance to try out my friend's new CBR250R.... looks good, huge plastic fairings, 12 litre tank, nissin brakes, one main light and 2 pole lights.... It is super blindingly bright... the brake light and signal lamps are also equally blinding.... The seat is a bit hard.... and the vibration strong. According to him the acceleration is non existent as it is single cylinder EFI. Comes with autochoke as do most FI bikes have nowadays. The bike can easily cruise at 120km/h.... Tank is 13 litres.... fuel consumption untested... should be about 30-40km/l..

 

Good potential sports touring bike... too bad no mainstand. And the rear tail lamp looks like a CBF150... =.=

 

http://1.bp.blogspot.com/_J3_liDBfbvs/TMsaHyO0yKI/AAAAAAAAzQ8/1afTqlSsUs0/s1600/2011%2BHonda%2BCBR250R%2BBlack.jpg

 

hahaha. faint. CBF taillight. these designers just cannot bear to combine best designs into a single bike eh?

[xXxRatedxXx]

 

 

 

Is this bike also made in Thailand ? Class 2B rider still cant buy this ley....

 

Yes thai made

[limbat]

Morning Everyone ............

 

If Thai made then spare parts will not be an issue Lorrr ............. too bad I bought a scooter leow ...... anyway the price is on the high side ley

[Kenneth.C]

Uncle Lim, u bought simi brand?

[xXxRatedxXx]

Uncle Lim, u bought simi brand?

 

http://bp2.blogger.com/_Mvhjidbvdzc/RnqjFTQd3WI/AAAAAAAABAA/2w9NKLThm9o/s400/g1.jpg

[limbat]

Uncle Lim, u bought simi brand?

 

Hi mate how have U been ?

 

 

http://bp2.blogger.com/_Mvhjidbvdzc/RnqjFTQd3WI/AAAAAAAABAA/2w9NKLThm9o/s400/g1.jpg

 

This is my new ride - Gilera Fuoco 50iE .......... Thank you Mr.xXx ..... for the racing picture....

[d0n]

uncle lim~

just dropped you PM on the projector lights DIY.

[limbat]

Yes mate - I saw all those pictures........wah say ..... U sure U wan to try ??? We use yr bike as test ok ?

[d0n]

Yes mate - I saw all those pictures........wah say ..... U sure U wan to try ??? We use yr bike as test ok ?

 

haha

no problem

the reflector assembly on my bike is aftermarket anyway, so can anyhow cut.

but got to look for another headlight assembly to fix onto the bike in the meantime while project is ongoing.

went to read up posts by other pple who DIY projector light + HID and saw the method they used to maintain lightbeam level (to prevent glare to other road users).

chim ah!

 

but wait, let me know the cost of the projector lens 1st (PM if not convenient to put price here).

i try to work out my budget for this project. hehe.

may attempt a one-eyed monster 1st since i usually only use 1 side of my headlight only.

[limbat]

I will sponsor the Projector lamp for your project - this unit is our Demo Unit....

[limbat]

btw the demo unit got "led angel eye" around it as well ........

[xXxRatedxXx]

i would like something brighter than our stock headlight.... i still can't see **** at night. Something to flood the area in front of me... no need throw

[xbfish]

I smell a DIY coming soon ! lol

 

Gogogo before I sch re-open

[ahbiao]

dudes, question.

 

When i travel at 100km/h (according to meter) and negotiate a very gentle bend (like the sheares bridge), my whole bike wobbles and becomes very unstable at that speed. Never used to be an issue. Then realized it wobbles when i try to do cornering as well.

 

Any idea what's wrong? I'm suspecting suspension, but don't know front or rear.

[xXxRatedxXx]

dudes, question.

 

When i travel at 100km/h (according to meter) and negotiate a very gentle bend (like the sheares bridge), my whole bike wobbles and becomes very unstable at that speed. Never used to be an issue. Then realized it wobbles when i try to do cornering as well.

 

Any idea what's wrong? I'm suspecting suspension, but don't know front or rear.

 

1. Wheel bearing cui already

2. Steering cone and bearings cui already

3. Tires uneven and bumpy... cui already

4. Gantung leaking cui already...

 

Check those in that order. For me it was 2. After changed already it is smooth.

[ahbiao]

ah...it was a lot simpler than that...

i was riding with a flat tyre...

[myfriendisdead]

Hi cbr150 owners. I have a problem wif my bike. Sometimes when I ride, my engine will stall halfway and I have to electric start it. Sometimes, while riding my bike, when I stop at traffic lights, my engine will stall. -_-( quite dangerous when there are alot of cars on the road. And sometimes, it's very hard to start my bike. Do u guys know the problem with my bike? I've went to 2 bike shops and it didn't solve the problem. I'm so clueless as to what shall I do..

[xXxRatedxXx]

Hi cbr150 owners. I have a problem wif my bike. Sometimes when I ride, my engine will stall halfway and I have to electric start it. Sometimes, while riding my bike, when I stop at traffic lights, my engine will stall. -_-( quite dangerous when there are alot of cars on the road. And sometimes, it's very hard to start my bike. Do u guys know the problem with my bike? I've went to 2 bike shops and it didn't solve the problem. I'm so clueless as to what shall I do..

 

1. Check sparkplug

2. Check idling

3. Check air filter

4. Check carb and hoses

5. Check CDI

6. Check rectifier and coil

 

For me no 5. did the trick

[Puteraboncet]

hi guys, may I know which shop do u guys go to get yr spare parts ? like footrest, gear shifter

[xXxRatedxXx]

hi guys, may I know which shop do u guys go to get yr spare parts ? like footrest, gear shifter

 

1. Everfit motor

2. FJT autoparts

3. united motor

4. LAB

[Puteraboncet]

1. Everfit motor

2. FJT autoparts

3. united motor

4. LAB

 

aites ! thanks . noted

[xXxRatedxXx]

aites ! thanks . noted

 

NOte that everfit need to pay GST.... so if u dont want to.... go to other shops. But its GENUINE ORIGINAL HONDA PARTS unlike the last one on the list.

[Puteraboncet]

NOte that everfit need to pay GST.... so if u dont want to.... go to other shops. But its GENUINE ORIGINAL HONDA PARTS unlike the last one on the list.

 

but i'm only wanted to buy footrest and mirror .. cause i skidded at my left side and only the left side rabak. so any recommandation whre to get the replace ? footrest and mirror