Home of CBR600

[Andox]

I might....hehe...i ride to ur place u help me install can?By the way,is it the one where it has 2 triangular mesh vent on the sides?How much huh?

[Sn0w_MaN]

so r u we going for outing...

[T02465]

any good stuff out there?haha

 

hahaha bro wat gd stuff u wan?

[Prankster]

U organise loh... Now wet season leh.... Sianz...

[GTboy]

I might....hehe...i ride to ur place u help me install can?By the way,is it the one where it has 2 triangular mesh vent on the sides?How much huh?

yupz..dats the one....from 03 model...till 07/08 model..the design is the same....only fitting is diff for 03/04...dats y i hav to buy a new one for my 07....heheh...

 

i bought my 03 hugger for 230-240sing......i bought my 07 hugger also around the same price.

 

1 side of the mesh is broken....but u can easily make a new mesh...watever color u want. if u interested gimme a call...so i dun hav to post in forum garage sale to sell...hehehe....i can help u install...no problem at all.

[d3an_cain]

Anyone can give me a rough OTR price for a new CBR600? Doesn't have to be the updated price right now, as long as I get a range of price from anyone who bought it within the last 2 years. Thanks.

 

was qoute 21K.. they say its bcos of the COE rising.. hmmm...

 

so far cbr is the cheapest among the 600cc bike.. m i rite 2 say tat?

[GTboy]

was qoute 21K.. they say its bcos of the COE rising.. hmmm...

 

so far cbr is the cheapest among the 600cc bike.. m i rite 2 say tat?

absolutely correct

[Andox]

Cool....i will get it from you then...price sir?

[GTboy]

Cool....i will get it from you then...price sir?

call me lah....

[ongsujie]

Hello.............bro, Welcome to cbr600 crib dude.

related to your Q, my suggestion, dont do anything yet until you understand

your machine very2 well.

 

try to ride with standard spocket 1st. (I'm on stock spocket for now)

 

for the suspension, dont do anything yet except for the rear preload (just make it a bit harder like 2 clik to hard) leave it to standard.

 

same goes to the triple clamp, dont do anything. (base on other website they susgest to lower the T.C by min 5 / max 10mm.)

 

Once you understand/fimiliar bout the bike then you can do some adjustment/setting to your need....

 

 

 

hi asjunior,

thanks for ur advice! i thought nobody would border me:cry: actually we met b4 at pg,i was riding the white/red/black CBR600RR n i was telling u dat my tyre pressure too high... remember? anyway thanks 4 ur help,im sure i need ur advice again! now planing to change tyre,wind screen n install gear indicator,want to go pg this sunday. r u going too?

[asjunior]

hi asjunior,

thanks for ur advice! i thought nobody would border me:cry: actually we met b4 at pg,i was riding the white/red/black CBR600RR n i was telling u dat my tyre pressure too high... remember? anyway thanks 4 ur help,im sure i need ur advice again! now planing to change tyre,wind screen n install gear indicator,want to go pg this sunday. r u going too?

 

Soooooooo sorry bro (cant recalled), there a few cbr600/07-08 rider, which 1 uhho_O??? are u the 1 with shark helmet.....and with BIG BALL paticipating in 5 laps fun challenge for the 1st time......

 

no problem bro.....try my best to help other in safe way....

 

thing u plan to change is a good move......

 

thanks for the offer bro, but i'm not goin:sian:....1st need to paint my house (for deepavali)wahahaha.......2nd it's a raining season....

 

plan for sepang on nov either 1st or 2nd nov.......

[Genitic]

Guys.. wld like to ask u all which is better... getting a tank bra, or a raceshield... beginning to get scratches on the fuel tank... most prob due to my jeans.... any recommendations on how u all get around it?

[Andox]

Guys.. wld like to ask u all which is better... getting a tank bra, or a raceshield... beginning to get scratches on the fuel tank... most prob due to my jeans.... any recommendations on how u all get around it?

 

Tankbra??

 

hi asjunior,

thanks for ur advice! i thought nobody would border me:cry: actually we met b4 at pg,i was riding the white/red/black CBR600RR n i was telling u dat my tyre pressure too high... remember? anyway thanks 4 ur help,im sure i need ur advice again! now planing to change tyre,wind screen n install gear indicator,want to go pg this sunday. r u going too?

 

 

Hi Sujie...i remember you...u came with Bryan right....nice to see u here...

[muddyxr]

Guys.. wld like to ask u all which is better... getting a tank bra, or a raceshield... beginning to get scratches on the fuel tank... most prob due to my jeans.... any recommendations on how u all get around it?

 

To protect from scratches, use raceshield.

 

Maintaining tankbra is a bit troublesome. Need remove & clean periodically. Rainwater stuck in between tank & tankbra will gradually corrode the tank paint. Even though the rainwater gets evaporated, the acidifying particles will still get stuck. The longer you leave it the more concentrated it’ll get. Tankbra is very useful with tank bags if you go touring though.

[Genitic]

To protect from scratches, use raceshield.

 

Maintaining tankbra is a bit troublesome. Need remove & clean periodically. Rainwater stuck in between tank & tankbra will gradually corrode the tank paint. Even though the rainwater gets evaporated, the acidifying particles will still get stuck. The longer you leave it the more concentrated it’ll get. Tankbra is very useful with tank bags if you go touring though.

 

hey thanks! but anyone using raceshield? its abit ex... so wanna hear some comments from own ppl first...haha...

[Prankster]

Guys.. wld like to ask u all which is better... getting a tank bra, or a raceshield... beginning to get scratches on the fuel tank... most prob due to my jeans.... any recommendations on how u all get around it?

 

If its really only ur jeans which are causing the scratches, which i think the protion just in front ur *ahem ahem* of the tank is scratched rite? Cause by the buttons of ur jeans??

 

Well, for me, i use those tank pad, which is sufficient enuff to protect scratches from my jean's button.... If u can't get what i mean, let me noe, i can take a photo of it and show u....

[Genitic]

If its really only ur jeans which are causing the scratches, which i think the protion just in front ur *ahem ahem* of the tank is scratched rite? Cause by the buttons of ur jeans??

 

Well, for me, i use those tank pad, which is sufficient enuff to protect scratches from my jean's button.... If u can't get what i mean, let me noe, i can take a photo of it and show u....

 

no worries.. i think i know what u referring to...haha.. if its effective enuff.. think i will get that.. Thanks!

[Prankster]

no worries.. i think i know what u referring to...haha.. if its effective enuff.. think i will get that.. Thanks!

 

U need any pictures?

[Genitic]

U need any pictures?

 

Wow, morning.... u are online... hmz... i think its those things that kinda look like... "ribcages" that is stuck to the tank...

[Andox]

Hi guys...anyone here using race fairrings on your CBR?

[ongsujie]

Tankbra??

 

 

 

 

Hi Sujie...i remember you...u came with Bryan right....nice to see u here...

 

 

yes is me. how r u? ur name is Eric right?

i think tankbra means leather tank cover?

[Yellowbiker]

For CBR track junkies

 

Race fAIRINGS

[Prankster]

Wow, morning.... u are online... hmz... i think its those things that kinda look like... "ribcages" that is stuck to the tank...

 

Yupz... U got it...

[Sn0w_MaN]

hmmm... i will think of where to go and let u all know soon.

[Dark_Divine]

hey thanks! but anyone using raceshield? its abit ex... so wanna hear some comments from own ppl first...haha...

 

i think if u wanna cover up the scratches on tank due to ur jeans...i think clever wolf tank pad is sufficient to cover the area.. but it comes only in carbon fiber ... it cost around $140 @ motoworld.