Yamaha YZF-R6

[shiroibai]

Hi Mich, im staying bedok too =D

[kornology]

anybody want to sell their race fairing???

[aRcHeR]

Yes, i planned to use this excuse.

 

By the way, anyone here fixed a illegal header + stock or legal endcan?

 

Will it gain any hp if i bring for a dyno tuing with this setup?

 

if you change to aftermarket headers with legal end can, cfm will have hp increase. if not change for what.

[aRcHeR]

but remove the box,need to remove replace with?

 

check back 1-2pages.. the other riders are talking about it.

[ambasnakeman]

 

2008 R6 test video at laguna seca. The front rider is not rossi, but a competitor in AMA who raced r6 last 2 yrs....also 46

[ambasnakeman]

[ambasnakeman]

[ambasnakeman]

[ambasnakeman]

[299]

White smoke while idling from complete cold (i.e left overnight) is pretty common, or when its an extremely cold morning like this month lousy weather.

This due to condensation of water in your components, which basically turns onto gaseous state (vapor) when bike is started with hot gases pumping past the condensation.

 

You should not see smoke once warmed up & ridden, unless the the ambient temp very low, or you just started your bike when parked in rain. (Its all abt rapid vaporisation of water from condensation, like when you speak at low ambient/cold areas... like cameron highlands or during winter ) If you do still white smoke.. then something is terribly wrong.

 

Air/fuel ratio perhaps.

[fruitcakepablohoney]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

 

come on guys.. lets all try n make it for dis meet up!

[R6uddin66]

hi, anyone knows where can i buy the quick release screw

Thanks

[ambasnakeman]

Unity has quick release

[ambasnakeman]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald[/size]

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

7) snakeman(will reach at about 930, afterwork)

 

come on guys.. lets all try n make it for dis meet up!

[rein_jahat14]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald[/size]

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

7) snakeman(will reach at about 930, afterwork)

 

come on guys.. lets all try n make it for dis meet up!

 

I would love to come..see & chat the R6 kaki's..

 

BUT its Haj period period,

Sending my parents off to the pilgrams on that day..

But if can make it..i'll turn up k bros..

 

BUT if i come wit my Runner can..R6 don have light nor mirrors..hehehe:faint:

[R6uddin66]

Unity has quick release

 

thanks for info bro

[bob_r6]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

7) Bob_R6

 

come on guys.. lets all try n make it for dis meet up!

 

Plan on being there.

[sapitos]

any news for 08??? :cry:

[eyz]

bro, i got 2 set @ 9$ each from Biketech. if ya want, i can sell it at 7$ each. can contact me @ 92390400.

 

hi, anyone knows where can i buy the quick release screw

Thanks

[eyz]

any of ya wanna head down to track tml for the morning session??

 

sorry guys, i'll try to be there for the west coast meet up. i'll do 12 hours shift and will finish my work @ 9pm.. usually i'll be dead beat by then... but still.. i'll try to make it~

[Chubb]

louder abit..

 

try gpr w/o muffler..

[mich]

try gpr w/o muffler..

 

haha...lik tat must spend again..

[HOLLA]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald[/size]

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

7) snakeman(will reach at about 930, afterwork)

8) Bob_R6

 

come on guys.. lets all try n make it for dis meet up!

[nihaoma]

Meet Up on Sat 15th Dec 8.30pm @ West Coast McDonald[/size]

ALL ARE WELCOME!Wah lao, so many R6 Rider but so little turning up?

 

1) Alvin

2) fruitcakepablohoney 96679695

3) Wayang

4) Rusdi

5) R M D

6) urbanman

7) snakeman(will reach at about 930, afterwork)

8) Nihaoma 91259173

 

come on guys.. lets all try n make it for dis meet up!

 

will try my best to come over,will call you guys...

[aRcHeR]

haha...lik tat must spend again..

 

den might as well get the micron headers to go with yr micron..