Kawasaki KRR150 Riders

[milktm]

Jam your foot on the tyre with as much force as possible..

 

Just close throttle la..It will slow down..Simple?

 

but the valve sometimes will have problem. should i clutch in after i brake or hold both the clutch n brake? will it affect the valve as well?

 

when i drag my gear until high rpm and suddenly close throttle, my engine will sound like as if its choking like that. is this normal?

 

it does happen to my bike as well.

[compfused]

when i drag my gear until high rpm and suddenly close throttle, my engine will sound like as if its choking like that. is this normal?

I dunno..Define chokin sound please..

 

but the valve sometimes will have problem. should i clutch in after i brake or hold both the clutch n brake? will it affect the valve as well?

You should not clutch in when you brake..That way you get the most effective brakin..Only clutch in when you are about to come to a stop..Forget what you learn at drivin centre already?

 

It seems like you need to get the valve checked/serviced..It shouldn;t have any problem if its workin the way it should..

[happieshalala]

brake and clutch does not affect the valve. valve is when rpm7 it will open. so when at traffic life u feel like no power or ur engine stalling, u have to clear valve. means let the rpm go till 7 before u change gear. my friends all call it "TIONG YOU" smthg like stuck oil lol.

 

 

correct me if i`m wrong =D

[epk]

I dunno..Define chokin sound please..

 

 

i also don't know how to explain. sounds like bike coughing. hahaha. but i usually don't straight away close throttle when i drag till high rpm. got a feeling it will spoil my engine. i'll like close throttle slightly then tap abit of brakes. then when rpm lower already then i'll close fully.

[adesmond2]

Did your valve closed back? I'm guessin it didn't..Blow a few times..It should get back to normal..

 

It will not close back until you close back yourself, I can teach you tml, if you free to come down my place with a spanner.. Aljunied... PM me for more details..

 

is it ok if i blow it tml? and blow means the rpm go until? stationary blow can?

 

It wun go back normal... You can try... Mine jammed and my FC becomes 10km/L.. better check your petrol while you going out.. Dun learn from my past experiences... I've push my bike from Bedok to aljunied.. not knowing my petrol is dry...

 

lol.. blow open ur throttle sufficiently and close and open again.. it should do the trick.

 

Can try but most likely wun worked... Been there before... thus I know...

 

ok sure! thanks alot!!

 

close throttle, tap ur brakes, use engine brake if possible, then u slow down liao

 

Normally, brake abit first before close throttle else your engine will "damaged" ABIT... There's this possiblilty... and your swing arm bearing will be affected as well...

 

when i drag my gear until high rpm and suddenly close throttle, my engine will sound like as if its choking like that. is this normal?

 

yeah.. same as one of the forumers who said here.. define choking sound...

 

i also don't know how to explain. sounds like bike coughing. hahaha. but i usually don't straight away close throttle when i drag till high rpm. got a feeling it will spoil my engine. i'll like close throttle slightly then tap abit of brakes. then when rpm lower already then i'll close fully.

 

It wun spoilt but it's bit by bit.. "wear and tear" as some people said.. no need to wait til RPM low... just feel the speed and the sound and just close accordingly will do..

[compfused]

It will not close back until you close back yourself, I can teach you tml, if you free to come down my place with a spanner.. Aljunied... PM me for more details..

If you have to use a spanner and close it back yourself..Only two things come to mind..Either it was assembled incorrectly or your valve is faulty..Time to get it replaced..

 

Normally, brake abit first before close throttle else your engine will "damaged" ABIT... There's this possiblilty... and your swing arm bearing will be affected as well...

Care to elaborate how it will affect the swingarm bearings?

[adesmond2]

have asked few of the mechs before.. If the force is going forward and you just off it, the force will be reduced greatly with the effect of engine breaking.. Thus it will affect your swing arm bearing as you are sitting in the centre, especially someone with heavy weight like me.. keke...

 

& of cuz, use spanner to close it back means valve jammed... have to close it back first to reduced the FC become eat up more and etc... power-loss and etc...

[Guest MeanRider07]

have asked few of the mechs before.. If the force is going forward and you just off it, the force will be reduced greatly with the effect of engine breaking.. Thus it will affect your swing arm bearing as you are sitting in the centre, especially someone with heavy weight like me.. keke...

 

& of cuz, use spanner to close it back means valve jammed... have to close it back first to reduced the FC become eat up more and etc... power-loss and etc...

 

hey bro.. wonder if ya free today? can help me see my bike ? i dun wanna push to shop for them to tell me this spoil tat spoil when its only a minor part tat has worn out and needs to be changed. Quite alot of prob la my bike.. fc high, no power, alignment like ****... even meter also spoil wan! frame also not good.. I really bought a chia lat bike half a yr ago and tot it was a good bike.

[kito]

I mean blow as in you squat near your bike and blow your bike physically..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Just rev for a while..Open close open close..Ride for a while..See if there's any "improvements"..If not its time to take a look at your valve..

 

 

Hello bros and sis,

GOOD MORNING!!!! I've been a long time never logged in liao. Didn't really have the time, sian tonight booking in again.

Seem like I've missed out alot.

 

You're going to miss out again won't u..

 

it works. thanks alot! btw, what is the actual way to slow down when i drag my gear till high speed?

 

Engine breaking + rear brake + front brake = Excellent stopping..

 

when i drag my gear until high rpm and suddenly close throttle, my engine will sound like as if its choking like that. is this normal?

 

Time to get "Nin Jiom Peh Pa Kau"!

 

brake and clutch does not affect the valve. valve is when rpm7 it will open. so when at traffic life u feel like no power or ur engine stalling, u have to clear valve. means let the rpm go till 7 before u change gear. my friends all call it "TIONG YOU" smthg like stuck oil lol.

 

 

correct me if i`m wrong =D

 

1 method which's true..

 

i also don't know how to explain. sounds like bike coughing. hahaha. but i usually don't straight away close throttle when i drag till high rpm. got a feeling it will spoil my engine. i'll like close throttle slightly then tap abit of brakes. then when rpm lower already then i'll close fully.

 

Since u wanna come to a stop, y do u still need to "close throttle slightly"?

 

hey bro.. wonder if ya free today? can help me see my bike ? i dun wanna push to shop for them to tell me this spoil tat spoil when its only a minor part tat has worn out and needs to be changed. Quite alot of prob la my bike.. fc high, no power, alignment like ****... even meter also spoil wan! frame also not good.. I really bought a chia lat bike half a yr ago and tot it was a good bike.

 

A year ago and it's still in it's previous state?

[jaydon]

whats the story?

 

there was this lady rider who rides damn fast on a rainy day.. and she wear high heels somemore!! i was only going at 120 suddenly she just peh past me!!

[compfused]

have asked few of the mechs before.. If the force is going forward and you just off it, the force will be reduced greatly with the effect of engine breaking.. Thus it will affect your swing arm bearing as you are sitting in the centre, especially someone with heavy weight like me.. keke...

I still don't get it..

 

hey bro.. wonder if ya free today? can help me see my bike ? i dun wanna push to shop for them to tell me this spoil tat spoil when its only a minor part tat has worn out and needs to be changed. Quite alot of prob la my bike.. fc high, no power, alignment like ****... even meter also spoil wan! frame also not good.. I really bought a chia lat bike half a yr ago and tot it was a good bike.

Thought of scrappin it?

 

Engine breaking + rear brake + front brake = Excellent stopping..

Rear brake + engine brakin = breakdance on the bike..

 

there was this lady rider who rides damn fast on a rainy day.. and she wear high heels somemore!! i was only going at 120 suddenly she just peh past me!!

Erm..Alright..Thanks for the info..

[kito]

there was this lady rider who rides damn fast on a rainy day.. and she wear high heels somemore!! i was only going at 120 suddenly she just peh past me!!

 

"Peh"?? What e hell is a "peh"! Anyone on for a search n "rescue" party?

[kito]

Rear brake + engine brakin = breakdance on the bike..

 

[compfused]

"Peh"?? What e hell is a "peh"! Anyone on for a search n "rescue" party?

Search for what?

[kito]

Search for what?

 

Search for e "Peh Peh" lady!

[jaydon]

"Peh"?? What e hell is a "peh"! Anyone on for a search n "rescue" party?

 

peh as in like open throttle past me!!

[milktm]

"Peh"?? What e hell is a "peh"! Anyone on for a search n "rescue" party?

 

im in!! really "in" to see how the girl look like.

 

peh as in like open throttle past me!!

 

y must use peh?? what language is this "peh"?

[compfused]

im in!! really "in" to see how the girl look like.

So eager? Don;t be surprised when you find "her" and found out "she" is a guy..

 

y must use peh?? what language is this "peh"?

Ah "peh" language?

[adesmond2]

hey bro.. wonder if ya free today? can help me see my bike ? i dun wanna push to shop for them to tell me this spoil tat spoil when its only a minor part tat has worn out and needs to be changed. Quite alot of prob la my bike.. fc high, no power, alignment like ****... even meter also spoil wan! frame also not good.. I really bought a chia lat bike half a yr ago and tot it was a good bike.

 

err... can see but no confirm ok hor...

 

can pm me for more details den...

[compfused]

err... can see but no confirm ok hor...

 

can pm me for more details den...

Can I come look look see see also?

[adesmond2]

lolx.. come lah... i think the owner should be ok bah... more people more comments and more help but so far i think valarie is the best... seen him opening up the entire fuel tank and clean the carb.. If it's me.. i dun dare...

[compfused]

lolx.. come lah... i think the owner should be ok bah... more people more comments and more help but so far i think valarie is the best... seen him opening up the entire fuel tank and clean the carb.. If it's me.. i dun dare...

Carb? I wish I know how to even take out one of the many screws on my bike..

[milktm]

So eager? Don;t be surprised when you find "her" and found out "she" is a guy..

 

Ah "peh" language?

 

i wish its not a guy. lol~

 

lolx.. come lah... i think the owner should be ok bah... more people more comments and more help but so far i think valarie is the best... seen him opening up the entire fuel tank and clean the carb.. If it's me.. i dun dare...

 

u guys meeting when n where?

[adesmond2]

Carb? I wish I know how to even take out one of the many screws on my bike..

 

i wish its not a guy. lol~

 

 

 

u guys meeting when n where?

 

 

lolx... screws on bike is the most simplest but most tiring... meet up location unknown yet...

[kito]

peh as in like open throttle past me!!

 

U mean open valve?

 

y must use peh?? what language is this "peh"?

 

Aaaaahhhh... It's in e thesaurus dictionary.. Try flipping e pages..

 

So eager? Don;t be surprised when you find "her" and found out "she" is a guy..

 

Ah "peh" language?

 

 

Can I come look look see see also?

 

I'll gatecrash if my schedule ain't that bz...

 

Carb? I wish I know how to even take out one of the many screws on my bike..

 

Oh i bet u do...

 

i wish its not a guy. lol~

 

u guys meeting when n where?

 

U'd be surprised if it is...

 

Meeting here n now..