Kawasaki KRR150 Riders

[wulalala]

if i were to change 100 sing enough to do my piston ring or wat ah?

go malaysia i do full service etc carb, block, piston, coolant = rm85 than u can choose to change your ring at an additional rm35 i do it at ramesh motorshop

[Yatz86]

sigh...accident liao.,,now can barely walk...only can limp..

[hellsfury]

For those who riding krr, sp or 2-strokers, i have found a gd deal for top overhaul going at only $195. This includes changing of new

piston

carb washing and tuning

engine oil change

coolant flush

gaskets

chain tightening

spark plug

Replace piston ring

Service valves

Polish block

Polish cylinder head

and checking of ur bike. Only genuine parts are used and they will show it to you.

Y am i promoting them? i think they r really gd and i bargained with them to come out with this package for the benefit of most 2B riders who r STUDENTS working part time. Hope this will help ur wallets. cheers!

btw if wanna change other stuff, just ask them n remember to bargain

This is as cheap as it gets unless u r willing to go Ah gua lane

 

Blk 1017 Yishun industrial park A #01-262

Brother Motors Servicing(The sign board says San Tar Wielding)

[Blahhh]

sigh...accident liao.,,now can barely walk...only can limp..

 

Bro, you what happened? skidded ar? Sounds bad man

[Mr Kips]

go malaysia i do full service etc carb, block, piston, coolant = rm85 than u can choose to change your ring at an additional rm35 i do it at ramesh motorshop

 

how long must wait ah?

[xjrredbull]

sigh...accident liao.,,now can barely walk...only can limp..

 

bro, how is ur legs??

hope u have a speedy recovery...

[tiempo]

ex-kawa rider reporting in...

 

[scroll:499761facb]

kawa ... kawa ... kawa ...

[/scroll:499761facb]

 

future kawa rider reporting also ... pending tp clearance

 

Future Kawa rider here reporting too Already cleared TP, saving money and looking for good deal. All the best to misterbean, hope you're from SSDC.

[xjrredbull]

 

Future Kawa rider here reporting too Already cleared TP, saving money and looking for good deal. All the best to misterbean, hope you're from SSDC.

 

Kawa kawa kawa kawa kawa kawa................krRulez...

[Blahhh]

 

Future Kawa rider here reporting too Already cleared TP, saving money and looking for good deal. All the best to misterbean, hope you're from SSDC.

 

Um, dude.. which page did u quote dat? MrBean was a very old poster, if I am not wrong, he had an accident on the NSH and passed on.

[Yatz86]

bro, how is ur legs??

hope u have a speedy recovery...

 

im limping all the way...lucky xray shows no fracture...

[skirtchaser]

......

 

 

wah bro ur bike very nice leh black n gold...all geared up for hari raya heh..

hehe

[skirtchaser]

im limping all the way...lucky xray shows no fracture...

 

lucky u ns evertin cover hor...

[skirtchaser]

how long must wait ah?

 

if wash carb, block, piston n change coolant n tuning only i think not more than 3 hrs if the mechanic there only concentrate on ur bike...i reckon it takes less than tat though...

[skirtchaser]

For those who riding krr, sp or 2-strokers, i have found a gd deal for top overhaul going at only $195. This includes changing of new

piston

carb washing and tuning

engine oil change

coolant flush

gaskets

chain tightening

spark plug

Replace piston ring

Service valves

Polish block

Polish cylinder head

and checking of ur bike. Only genuine parts are used and they will show it to you.

Y am i promoting them? i think they r really gd and i bargained with them to come out with this package for the benefit of most 2B riders who r STUDENTS working part time. Hope this will help ur wallets. cheers!

btw if wanna change other stuff, just ask them n remember to bargain

This is as cheap as it gets unless u r willing to go Ah gua lane

 

Blk 1017 Yishun industrial park A #01-262

Brother Motors Servicing(The sign board says San Tar Wielding)

 

they mech name ah tat rite??

if so ive been there a few times cuz its near my camp...

nice chap reasonable workmanship but pricewise not so sure leh i find them quite ex

[skirtchaser]

go malaysia i do full service etc carb, block, piston, coolant = rm85 than u can choose to change your ring at an additional rm35 i do it at ramesh motorshop

 

my fren kr all stock sent to ramesh do tuning then bike can reach >200km/h!! of cuz he did change the gear ratio too

[AH_PEK_LAH]

wah...dont bluff lah... u give the most tips here...hhaha... btw, when's ur next race? invite me arh...

 

yaya

i also wanna see

@_@

:angel:

[Blahhh]

they mech name ah tat rite??

if so ive been there a few times cuz its near my camp...

nice chap reasonable workmanship but pricewise not so sure leh i find them quite ex

 

Haha yeh, ah tat & ah beng. I agree with what u say.. nice chaps (esp to talk **** with), workmanship not bad (i think one of the better ones in YISHUN) but pricewise abit ex sometimes. Hmm, long time never go there, maybe will go there soon to annoy ah beng

[Blahhh]

my fren kr all stock sent to ramesh do tuning then bike can reach >200km/h!! of cuz he did change the gear ratio too

 

Ramesh is a very skilled mech.. good at tuning and 2 stroke bikes. Noticed alot of KRR's, TZM's, 125z' and RXZ's there. Shop seem to be filled with more malay & indian riders den chinese riders tho. Anyway, Ramesh got a fierce reputation in AGL, most of the mechs there noe his skills as a racer. Very humble fellow too.

[skirtchaser]

Haha yeh, ah tat & ah beng. I agree with what u say.. nice chaps (esp to talk **** with), workmanship not bad (i think one of the better ones in YISHUN) but pricewise abit ex sometimes. Hmm, long time never go there, maybe will go there soon to annoy ah beng

 

my bike mostly done by ah tat so far talk to him only i find his brother doesnt talk much...only went there when desperate if not i only patronize agl

[skirtchaser]

Ramesh is a very skilled mech.. good at tuning and 2 stroke bikes. Noticed alot of KRR's, TZM's, 125z' and RXZ's there. Shop seem to be filled with more malay & indian riders den chinese riders tho. Anyway, Ramesh got a fierce reputation in AGL, most of the mechs there noe his skills as a racer. Very humble fellow too.

 

well didnt noe he got fierce reputation as a racer but do find him easy to talk to...didnt get the chance to tune my bike by him...

[kito]

dudes..how do i know its time to wash/service carb, block, piston??will the bike show any signs of this things??

[hellsfury]

haha yes it USED to be expensive i think last time he charged 240? but todae i told him frankly it was too high... anyways i confirm its 195. if he charge u higher than that just print out this page n F3## him:)

[Mr Kips]

Ramesh is a very skilled mech.. good at tuning and 2 stroke bikes. Noticed alot of KRR's, TZM's, 125z' and RXZ's there. Shop seem to be filled with more malay & indian riders den chinese riders tho. Anyway, Ramesh got a fierce reputation in AGL, most of the mechs there noe his skills as a racer. Very humble fellow too.

 

care to me wat time he open?

[Yatz86]

hmm i donno about ramesh but engine wise i go to ah kiang next door to ramesh.

[AH_PEK_LAH]

`chUn;3396659']u look at alex bike =nick "ah pek lar"

 

dun think will be boring anymore..

 

LOL!! top speed anytime more den 200km/h

 

erm if rs250 no more then 200km/hr

think the bike gt problem le

:dozed: