Kawasaki KRR150 Riders

[Eno]

very hard to skid on battlax tyres. trust me im using those now heehee

very good on wet and suberb on hot weather. especially on tracks hahaa

 

Okaylah next tyre battlax already..see lah u all influence me use battlax tyres..i've never used battlax tyre my whole life..always go for cheaper dunlop tyres..but i finally got persuaded after I heard "its better to spend extra on tyres so u dun have to spend extra money after a skid on cheap tyres.."

[Kyrul]

Gd choice!

[alvin8787]

very hard to skid on battlax tyres. trust me im using those now heehee

very good on wet and suberb on hot weather. especially on tracks hahaa

 

Okaylah next tyre battlax already..see lah u all influence me use battlax tyres..i've never used battlax tyre my whole life..always go for cheaper dunlop tyres..but i finally got persuaded after I heard "its better to spend extra on tyres so u dun have to spend extra money after a skid on cheap tyres.."

 

Gd choice!

 

for three shifu

uncle never play coner

ll the while use rear 110

any advise any size smaller thn 110 for rear but not too small like sotong tyre(for safety)

[a d v o C a t e s]

hey guys, how to make my bike fast, porting and racing carb enough ?

[wee keong]

Just as i am starting to love my bike which i use to dislike, someone hit my bike and run. Leaving me with my side cover crack and paint chipped. My heart is so painful like a thousand needles taunting at it. anybody knows how much coverset cost?

[adesmond2]

.... double post....

Edited January 11, 2011 by adesmond2

[adesmond2]

Just as i am starting to love my bike which i use to dislike, someone hit my bike and run. Leaving me with my side cover crack and paint chipped. My heart is so painful like a thousand needles taunting at it. anybody knows how much coverset cost?

 

wow.. that's extremely crap!! where you park sia? as for all the crack.. i would suggest you to "patch" and re-spray... dun buy new ones.. =)

[wee keong]

wow.. that's extremely crap!! where you park sia? as for all the crack.. i would suggest you to "patch" and re-spray... dun buy new ones.. =)

 

Really desmond. My heart is so pain u know when i saw the crack. Patching it up wont be a problem. The paint work is i think. I'll show u on the next outing. See what u guys suggest i can do. It's like stickers peeling off. I can see the base of the coverset.

[wee keong]

wow.. that's extremely crap!! where you park sia? as for all the crack.. i would suggest you to "patch" and re-spray... dun buy new ones.. =)

 

Really desmond. My heart is so pain u know when i saw the crack. Patching it up wont be a problem. The paint work is i think. I'll show u on the next outing. See what u guys suggest i can do. It's like stickers peeling off. I can see the base of the coverset.

[samurai8410]

did i smiled to ani1 here just now at pasirris hee.... im riding a blue rizla kr...

[gutripper]

Really desmond. My heart is so pain u know when i saw the crack. Patching it up wont be a problem. The paint work is i think. I'll show u on the next outing. See what u guys suggest i can do. It's like stickers peeling off. I can see the base of the coverset.

 

I understand how you feel bro. I will feel damn furious that the mofo got away with it.

[Kyrul]

for three shifu

uncle never play coner

ll the while use rear 110

any advise any size smaller thn 110 for rear but not too small like sotong tyre(for safety)

 

If never corner can use frnt 80/90 bck 90/80.

 

hey guys, how to make my bike fast, porting and racing carb enough ?

 

Stndrd port block, port stock carb, empty out fully stock stomach is alrdy gd enugh. Use racing carb will wear out ur conrod faster over time

[Ng Weiming]

I go to about 180km/h but then it starts going into the red (10500rpm) and then i close down the throttle( it can still go but i don't like to push it that hard) . but i have standard front sprocket and 38t rear. and u?

 

 

 

about the same 180kph but that is with rear spocket 40 now have change to 39,i think it can go beyond 180kph now haven really test it..btw my bike all stock.

[dukuwawa]

guys where is the rectifier located for kr??isit near the batt??

[Eno]

guys where is the rectifier located for kr??isit near the batt??

 

Take out your tank. You will see two stuffs. The rectifier is on the left(squarish) while the magnetic coil is on the right(black circular) shape.

 

Additional info: Brand new original rectifier will cost around $75.

[adesmond2]

did i smiled to ani1 here just now at pasirris hee.... im riding a blue rizla kr...

 

lolx.. might not be anyone from the forum?

 

Really desmond. My heart is so pain u know when i saw the crack. Patching it up wont be a problem. The paint work is i think. I'll show u on the next outing. See what u guys suggest i can do. It's like stickers peeling off. I can see the base of the coverset.

 

no problem.. patch it up.. cya soon..

 

Take out your tank. You will see two stuffs. The rectifier is on the left(squarish) while the magnetic coil is on the right(black circular) shape.

 

Additional info: Brand new original rectifier will cost around $75.

 

err.. right that one is ignition coil.. not magnetic coil..

magnetic coil is v.big on the left side of your engine..

[2wheelsdriver]

Hi guys where can i fix a good rear gantong in sg? and what is the price? compared to jb? Hope yyou guys can help help me with this coz its been too long since i ride bike n most probably will be carrot by bikeshop if I don't know the average market price.

And any good brand to look out for? Txs in advance....

[jwylong]

i repair in malaysia about 290 RM you can ask me during the next outing ( with paint work )

[Eno]

lolx.. might not be anyone from the forum?

 

 

 

no problem.. patch it up.. cya soon..

 

 

 

err.. right that one is ignition coil.. not magnetic coil..

magnetic coil is v.big on the left side of your engine..

 

Oooh cey..mistaken both..I thought they say coil refering to magnetic coil..the ignition coil price range how much 1st hand ori sg?

[dukuwawa]

oh oki....so i suspected...there was smoke coming out from my tank area when i was riding...i guess its burnt now

[Hafiz Rahim]

new krr rider checkingin . .

guys i need some help over, anyone cn get a cheap block ?

the other my block got burn, and the workshop told me that i've to change the whole thing including the piston. but when i look at my piston, it can still be use.. total cost will be, $600+ thats too much.. any suggestion ?

[adesmond2]

Oooh cey..mistaken both..I thought they say coil refering to magnetic coil..the ignition coil price range how much 1st hand ori sg?

 

lolx.. price unknown...

 

new krr rider checkingin . .

guys i need some help over, anyone cn get a cheap block ?

the other my block got burn, and the workshop told me that i've to change the whole thing including the piston. but when i look at my piston, it can still be use.. total cost will be, $600+ thats too much.. any suggestion ?

 

go to another shop and ask.. if your bike parts already dismantle, collect back all parts.. Tow your bike to another workshop that quote you a lower price..

Block - $3xx

Piston - $7x~8x

Ring- less den $30

[Kyrul]

new krr rider checkingin . .

guys i need some help over, anyone cn get a cheap block ?

the other my block got burn, and the workshop told me that i've to change the whole thing including the piston. but when i look at my piston, it can still be use.. total cost will be, $600+ thats too much.. any suggestion ?

 

 

Block cn get burned?? U went sg shop? Cnfrm lying

[Kyrul]

lolx.. price unknown...

 

 

 

go to another shop and ask.. if your bike parts already dismantle, collect back all parts.. Tow your bike to another workshop that quote you a lower price..

Block - $3xx

Piston - $7x~8x

Ring- less den $30

 

Piston + ring can get for 70 (ori)

N block if its 300+ mayb local

Must chck ferst

[gutripper]

new krr rider checkingin . .

guys i need some help over, anyone cn get a cheap block ?

the other my block got burn, and the workshop told me that i've to change the whole thing including the piston. but when i look at my piston, it can still be use.. total cost will be, $600+ thats too much.. any suggestion ?

If I am not wrong, someone was selling a block. A few pages back.