SBF Silverwings / HOM Cafe 2012

[entheos_golf]

Yes. I have a 42L kappa topbox and was going ....ahem....quite fast. Think the wind is the cause i suppose... now i dun dare go beyond a certain speed oredy...������

 

Hmmm ... I also was followed by another scooter was trailing and go very close to my side . Later I will review with my camera . See I can capture the gundu rider and will post it on you tube for others to be aware oh him .

 

Just manage to get the TOP box a GIVI v47 choose this it seems it can hold the load of 10kg , comes with back rest and back break lights . Hopefully will not have any resistance issues during faster speed .

 

Next to get stickers to cover the previous owner scratches on farring and the silver exhaust cover , any suggestion which shop is the best?

[confusehaha]

Anyone looking to let go their coe due silverwing? please msg me at 96249844. thank you!

[kmkoon]

Hi. I wanted to install camera on bike which shop best to go? I know for sw workmanship cfm ex.. So just asking u all know anyone do cheap workmanship?

 

Sent from my D6653 using Tapatalk

[SW9000]

Anyone interested in Betong Countdown... 31 Dec 16 to 2 Jan 17 (long weekend)?

[QuietStorm]

Hi guys!

 

selling my SW400...

 

http://www.singaporebikes.com/forums/showthread.php/490217-WTS-Honda-Silverwing-FJS400?p=8432145#post8432145

 

thx!

[QuietStorm]

Anyone looking to let go their coe due silverwing? please msg me at 96249844. thank you!

 

send u a WA message

[wait4me]

wooo silverwing with LV pipe

rare

[abcdef]

hi guys today i replaced my sliverwing battery by myself. i removed - followed by +, replaced battery and connect + followed by -. is the sequence correct?

 

after battery replaced, my bike still cannot start. i replaced underseat 30A fuse with a spare and bike back to normal. do you think fuse blown due to me replacing the battery incorrectly?

 

oh is there any shop that will take back used battery and i can earn abit too???

[SW9000]

To remove Batt... start with 'minus'.

To add Batt... start with 'Plus'.

Simple, yah? You're correct.

 

Fuse blow might be due to other factors.

[Salem514]

I convert my H7 lights to H4 which is look good and sporty also I add a flood LED lights with laser fog light at rear.

 

[Crazy]

Hi All, what is the price range for full servicing for replacing roller, belt and clip? Anything that I miss out? First time doing servicing for scooter. Mileage close to 60k. Thanks in advance.

Edited December 9, 2016 by Crazy

[SW9000]

Belt, rollers and U clip should be around $230++.

Still need to change Engine Oil (2.2L) and transmission oil (0.320L), Oil Filter and spark plugs.

Air filter? Original about $40++.

[Crazy]

Hi, SW9000 thank you very much for your input. I belive ac motor shld be around that price right?

[mU]

Echo Crazy fr the thx. Will use that as a reference fr future sw maintenence.

 

I would also like to hear the opinion of fellow riders regarding some price comparision:

 

Spent $145 on rear diablo scoot (tyre n labour). Is this abt the market price now?

 

Saw a Unique price list on sw costing $288. Includes belt+clips etc

 

http://uploads.tapatalk-cdn.com/20161209/9d09790bf9b1b68aec8990c1e6378d53.jpg

 

Referencing SW9000's post, an additional 50odd dollars fr the filter, EO etc sounds like a good deal to novice like me.

 

Any advice/opinion on these will be helpful.

 

Thx.

 

Sent from my SM-G920I using Tapatalk

[SW9000]

Diablo should be around $210-$230 a pair. Used to be $180 but base cost has increased in recently years.

 

For full service stated in the earlier post, the difference between shops are just $20-$30.

It's the Mech that you should consider.

 

Most would have gone to ACM because he is also a Maxi-Scooter rider.

He would actively provided advises if he spotted any issues with the bike.

There might be other Mechs like him elsewhere but not easy to find.

 

Get someone your trust and then stick with him.

[abcdef]

To remove Batt... start with 'minus'.

To add Batt... start with 'Plus'.

Simple, yah? You're correct.

 

 

Fuse blow might be due to other factors.

 

Hi, today my bike won't start again same issue as the previous time. Pressed the start button with left lever pressed and there's only a click sound. Checked fuse continuity all OK, battery just replaced recently, side stand and red button on right side in correct position. After a while I tested horn and brake lights and decided to try my luck again and this time it started. I am puzzled. ..

[SW9000]

If old bike:

 

1. Connector at the brake lever is dirty or faulty.

 

2. Starter switch faulty.

 

3. Check the Starter.

 

 

Hi, today my bike won't start again same issue as the previous time. Pressed the start button with left lever pressed and there's only a click sound. Checked fuse continuity all OK, battery just replaced recently, side stand and red button on right side in correct position. After a while I tested horn and brake lights and decided to try my luck again and this time it started. I am puzzled. ..

[entheos_golf]

I convert my H7 lights to H4 which is look good and sporty also I add a flood LED lights with laser fog light at rear.

 

 

Yah man looks great . I also like that you manage to get dual head lamp un like the standard that looks like one eye . Very cool .

[Dick Steele]

Happy New Year everyone !!

 

I need anyones expert advise. I friend of mine suffered a low side crash. And his SWing 400 will need a whole lot of parts. Are the parts off a 600 will fit a 400? Specifically the Front Cowl, Forks, & possible lower side fairings.

 

Advise pls... Cheers !!!

[vknesh]

Happy New Year to all!

 

I'm planning to upgrade to SW400 from X8 that I have been riding for almost 8 years. Can I seek advice from the experts here what to look out for when purchasing this beauty? I'm intending to purchase directly from Boon Siew. Is it a good idea to get the top box directly from them also?

Thanks!

[SW9000]

Helping to advertise...

 

Bike Info:

Registered on May 2015.

Age: 20 months old. Mileage: 13,000.

Price include the following ...

. Hepco Box with backrest - $550

. HD Bike cam front and rear - $400

. 20k Servicing package - $1.3k

. Crash Guard - $550

 

https://sg.carousell.com/p/bmw-c650-78070762/

[Exu]

Hi fellow sw riders, I have the clock reset problem which it resets to 1.00 everytime I turn on ignition.

 

Checked the fuse but apparently not issues. Can recommend any workshop to check?

 

My silverwing year of manufacture is 2001. Can the hagon shocks for FJS400 2009 fit?

 

http://www.wemoto.com/bikes/honda/fjs_400_silverwing_a9_d9/09/

Edited January 10, 2017 by Exu

[joey_sfb]

Will be getting my SW-T400 from Boon Siew this month. I am a CB400 rider for 8 yrs. Any advise for a SW newbie?

[SW9000]

huh? Boon Siew got new SW-T400?

[joey_sfb]

I ordered since Apr last year. They are finally here. Reason for the delay. Earthquake and their factory production is hitted. Boon Siew state that Dec 2016 is the last month for SW-T400 production.

 

If they could not fulfilled SW they would replace it with the new 750S. I am glad to be able to get the last new SG SW from Boon Siew:o