Ducati Riders

[Sols]

after seeing all the new bikes... i feel like getting a street fighter... lol...

[red rocket]

Thanks singkiwi. Am towing the bike to workshop for the time being since its cannot be ridden. Can contact me at 93200430 if you happen to find one or else I got to place an order with workshop.

 

Sols - Parked it at my MSCP. Two days ago, wanted to ride it to work. Pushed the bike out of lot and pulled the brake lever. To my surprise, brake lever went all the way in without any pressure at all. Checked the front, realised that the caliper was missing with all the brake fluid all over the front wheel. Freakin' ahole.... Cant imagine what wld happen if I did not push the bike out of the lot and just ride it as usual. Think I wld have crashed in the MSCP.

 

claim insurance? these calipers don't come cheap

[red rocket]

Ducati fans should check out this guy's 1098r... enjoy and drool

 

http://www.ducati.ms/forums/showthread.php?t=76500

[ducati]

claim insurance? these calipers don't come cheap

 

 

Does insurance cover calipers? I always thought its the theft of the whole bike then it would be covered.

[red rocket]

Does insurance cover calipers? I always thought its the theft of the whole bike then it would be covered.

 

why not call and check.

[singkiwi]

Thanks singkiwi. Am towing the bike to workshop for the time being since its cannot be ridden. Can contact me at 93200430 if you happen to find one or else I got to place an order with workshop.

 

.

 

http://shop.ebay.com.sg/i.html?LH_AvailTo=180&_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A2396&_nkw=brembo%20caliper%20ducati&_trksid=p3286.c0.m14&_pgn=2

 

there's quite on few on Ebay, are yours the same as the 1098s?

Edited May 6, 2010 by singkiwi

[ducati]

http://shop.ebay.com.sg/i.html?LH_AvailTo=180&_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A2396&_nkw=brembo%20caliper%20ducati&_trksid=p3286.c0.m14&_pgn=2

 

there's quite on few on Ebay, are yours the same as the 1098s?

 

Checked Ebay earlier but am not sure which is suitable. However, I remembered some sites stating that the hym uses the same calipers as the 1098. So if the 1098S uses the same ones, shld be a good fit. Worst case scenario got to order.

Edited May 7, 2010 by ducati

[phantom150]

HI,

 

Have 2 ONLY pairs of GFA95HH left over from the MO.

 

some ass booked but didnt collect in the end.

 

Going for 80/per pair, usual 113. Take note this is the GFA series, which means the highest range in EBC equivalent of current EPFA. Much stronger and faster biting than the usual HH sintered which is already commonly used for track.

 

This is the ultimate series in EBC range.

 

suitable for the following ducati models:

 

Supersport 400 93-97 F

400 Monster 95-97 F

Supermono (549cc) 93-95 F

600 Monster 93-99 F

600 Monster Dark 98-99 F

600 Monster City/City Dark 99 F

600 Supersport 91-97 F

748 SP 95-98 F

749 Biposto 95-98 F

750 Supersport 91-98 F

Supersport 750 (Twin disc) 91-98 F

750 Monster 96-98 F

750 Monster City/City Dark 99 F

750 Monster/Monster Dark 99 F

851 Superbike Biposto 89-92 F

884 SP4/SP5 92-93 F

888 Superbike Strada 94-95 F

900 Supersport 89-90 F

900 Supersport/Superlight 91-97 F

900 Supersport CR USA 98 F

900 Supersport FE 98 F

900 Monster 93-99 F

900 Monster Cromo/Special 98 F

900 Monster City/City Dark 99 F

907 IE 90-93 F

916 SPS (996cc) 97-98 F

916 Biposto 94-98 F

916 Senna 94-98 F

916 SP 94-96 F

 

 

 

 

 

contact me 82280836 to pick it up.serangoon/amk/ubi area depending on days/situation.

 

brand new seal in packing.

[ocel]

SORRY TO interupt . i gt a puma ducati jacket for sale for 60 dollar. brand new nt used. do pm me for enquiry. its grey in color n xl size.

[Lass]

........................

Edited May 8, 2010 by Lass

[red rocket]

Duplicate post

[red rocket]

After 17 years HD's dominance is broken.

 

http://www.gizmag.com/ducati-hypermotard-1100evo-powered-flat-tracker/15017/

[alkapot]

Hi pple,

Just now when I was "trying" my 916 at raymonds plc, I discovered that it takes alot of effort for me to kick to neutral gear. I had just changed e clutch plates and raymond told me that I gotto ride it for sumtime till the plates are thin enough. Is this a common issue for a 916 upon changing to new plates? or are there any alternatives?

Thank You..

[maxbg]

Hi pple,

Just now when I was "trying" my 916 at raymonds plc, I discovered that it takes alot of effort for me to kick to neutral gear. I had just changed e clutch plates and raymond told me that I gotto ride it for sumtime till the plates are thin enough. Is this a common issue for a 916 upon changing to new plates? or are there any alternatives?

Thank You..

 

your answer....

 

http://www.ducati.ms/forums/showthread.php?t=72872

[alkapot]

your answer....

 

http://www.ducati.ms/forums/showthread.php?t=72872

 

That answers it. I guess I gotto try hitting it 2 neutral before the bike completely stops for now. Thanx Maxbg!

[maxbg]

http://pix.crash.net/motorsport/360/PA740727.jpg

 

1. Max Biaggi ITA Aprilia Alitalia Racing RSV-4 1min 42.121s

2. Cal Crutchlow GBR Yamaha Sterilgarda YZF R1 1min 42.154s

3. Michel Fabrizio ITA Ducati Xerox 1198 1min 42.499s

4. Jonathan Rea GBR Ten Kate Honda CBR1000RR 1min 42.566s

5. Leon Haslam GBR Alstare Suzuki GSX-R1000 1min 42.633s

6. Ruben Xaus ESP BMW Motorrad S1000RR 1min 42.725s

7. James Toseland GBR Yamaha Sterilgarda YZF R1 1min 42.789s

8. Tom Sykes GBR Kawasaki SRT ZX-10R 1min 43.111s

 

9. Max Neukirchner GER Ten Kate Honda CBR1000RR 1min 43.410s

10. Luca Scassa ITA Supersonic Ducati 1198 1min 43.431s

11. Carlos Checa ESP Althea Ducati 1198 1min 43.506s

12. Troy Corser AUS BMW Motorrad S1000RR 1min 43.508s

13. Leon Camier GBR Aprilia Alitalia Racing RSV-4 1min 43.530s

14. Sylvain Guintoli FRA Alstare Suzuki GSX-R1000 1min 43.691s

15. Shane Byrne GBR Althea Ducati 1198 1min 43.813s

16. Noriyuki Haga JPN Ducati Xerox 1198 1min 43.957s

 

17. Jakub Smrz CZE PATA B&G Racing Ducati 1198 1min 44.291s

18. Chris Vermeulen AUS Kawasaki SRT ZX-10R 1min 44.802s

19. Lorenzo Lanzi ITA DFX Ducati 1198 1min 44.878s

20. Matteo Baiocco ITA Team Pedercini Kawasaki ZX-10R 1min 46.180s

 

21. Daisaku Sakai JPN Yoshimura Suzuki GSX-R1000 1min 45.821s

22. Roger Lee Hayden USA Team Pedercini Kawasaki ZX-10R 1min 46.771s

23. Vittorio Iannuzzo ITA SCI Garvie CBR1000RR 1min 46.912s

24. Broc Parkes AUS Echo-CRS Honda CBR1000RR 1min 45.799s

[Jan]

Hi pple,

Just now when I was "trying" my 916 at raymonds plc, I discovered that it takes alot of effort for me to kick to neutral gear. I had just changed e clutch plates and raymond told me that I gotto ride it for sumtime till the plates are thin enough. Is this a common issue for a 916 upon changing to new plates? or are there any alternatives?

Thank You..

 

ride more often.......n you will be able to engage neutral....

[maxbg]

http://pix.crash.net/motorsport/360/PA740727.jpg

 

1. Max Biaggi ITA Aprilia Alitalia Racing RSV-4 31mins 07.044s

2. James Toseland GBR Yamaha Sterilgarda YZF R1 +0.247s

3. Cal Crutchlow GBR Yamaha Sterilgarda YZF R1 +0.297s

4. Leon Haslam GBR Alstare Suzuki GSX-R1000 +0.958s

5. Leon Camier GBR Aprilia Alitalia Racing RSV-4 +4.493s

6. Ruben Xaus ESP BMW Motorrad S1000RR +7.343s

7. Michel Fabrizio ITA Ducati Xerox 1198 +7.369s

8. Troy Corser AUS BMW Motorrad S1000RR +9.344s

9. Tom Sykes GBR Kawasaki SRT ZX-10R +15.338s

10. Sylvain Guintoli FRA Alstare Suzuki GSX-R1000 +16.761s

11. Noriyuki Haga JPN Ducati Xerox 1198 +16.921s

12. Max Neukirchner GER Ten Kate Honda CBR1000RR +22.231s

13. Shane Byrne GBR Althea Ducati 1198 +22.602s

14. Carlos Checa ESP Althea Ducati 1198 +22.742s

15. Jakub Smrz CZE PATA B&G Racing Ducati 1198 +26.266s

 

16. Luca Scassa ITA Team Supersonic Ducati 1198 +26.415s

17. Lorenzo Lanzi ITA DFX Ducati 1198 +26.968s

18. Chris Vermeulen AUS Kawasaki SRT ZX-10R +36.964s

19. Roger Lee Hayden USA Team Pedercini Kawasaki ZX-10R +51.646s

20. Broc Parkes AUS Echo-CRS Honda CBR1000RR +1 lap

 

Not Classified

 

21. Daisaku Sakai JPN Yoshimura Suzuki GSX-R1000 9 laps completed

22. Jonathan Rea GBR Ten Kate Honda CBR1000RR 8 laps completed

23. Vittorio Iannuzzo ITA S.C.I Garvie Honda CBR1000RR 1 lap completed

 

Excluded

 

Matteo Baiocco ITA Team Pedercini Kawasaki ZX-10R

[maxbg]

http://pix.crash.net/motorsport/360/PA742009.jpg

 

1. Max Biaggi ITA Aprilia Alitalia Racing RSV-4 18 laps

2. Leon Haslam GBR Alstare Suzuki GSX-R1000 +4.547s

3. Troy Corser AUS BMW Motorrad S1000RR +5.469s

4. Leon Camier GBR Aprilia Alitalia Racing RSV-4 +10.267s

5. Tom Sykes GBR Kawasaki SRT ZX-10R +15.561s

6. Noriyuki Haga JPN Ducati Xerox 1198 +15.816s

7. Sylvain Guintoli FRA Alstare Suzuki GSX-R1000 +15.861s

8. Jakub Smrz CZE PATA B&G Racing Ducati 1198 +20.977s

9. Shane Byrne GBR Althea Ducati 1198 +21.920s

10. Luca Scassa ITA Team Supersonic Ducati 1198 +21.974s

11. Carlos Checa ESP Althea Ducati 1198 +27.152s

12. Max Neukirchner GER Ten Kate Honda CBR1000RR +29.315s

13. Chris Vermeulen AUS Kawasaki SRT ZX-10R +30.858s

14. Roger Lee Hayden USA Team Pedercini Kawasaki ZX-10R +47.160s

15. Broc Parkes AUS Echo-CRS Honda CBR1000RR +48.824s

 

 

Not Classified

 

16. Cal Crutchlow GBR Yamaha Sterilgarda YZF R1 12 laps completed

17. Matteo Baiocco ITA Team Pedercini Kawasaki ZX-10R 10 laps completed

18. Lorenzo Lanzi ITA DFX Ducati 1198 9 laps completed

19. Vittorio Iannuzzo ITA S.C.I Garvie Honda CBR1000RR 6 laps completed

20. Michel Fabrizio ITA Ducati Xerox 1198 1 lap completed

21. James Toseland GBR Yamaha Sterilgarda YZF R1 0 laps completed

22. Ruben Xaus ESP BMW Motorrad S1000RR 0 laps completed

23. Jonathan Rea GBR Ten Kate Honda CBR1000RR 0 laps completed

 

Did Not Start

 

Daisaku Sakai JPN Yoshimura Suzuki GSX-R1000

[oranje]

anyone has a right side mirror from the 749/999 series for sale?

 

dropped my bike so.. i'll need a replacement.

[alkapot]

ride more often.......n you will be able to engage neutral....

 

Oh yes lanz, I bought e same plates that you've ordered the other time when ur bike is at rays, the barnett plates. Apparently raymond told me that this plates are thick and he recommends me to get e newfren plates nxt time whch is much mre cheaper, 99euros a set. Thanx for the advice.

[red rocket]

Oh yes lanz, I bought e same plates that you've ordered the other time when ur bike is at rays, the barnett plates. Apparently raymond told me that this plates are thick and he recommends me to get e newfren plates nxt time whch is much mre cheaper, 99euros a set. Thanx for the advice.

 

yo bro,

clutch pack thickness got spec. not every model year the same. All can use, but to perform is a different matter.

[alkapot]

yo bro,

clutch pack thickness got spec. not every model year the same. All can use, but to perform is a different matter.

 

Ic ic.. I didn't noe that. So for optimum performance on a 95' 916, any thickness or make would u recommend bro? i'm usin a 30.5mm clutch slave cyl.

[maxbg]

Ic ic.. I didn't noe that. So for optimum performance on a 95' 916, any thickness or make would u recommend bro? i'm usin a 30.5mm clutch slave cyl.

 

The issue with the difficulties to find neutral is due to the clutch disengagement distance.

 

So there are quite a number of factors that can cause that:

1) clutch thickness

2) Slave cylinder diameter (bigger means less travel distance)

3) Air in the hydraulic system (the neutral gets harder to find after engine gets hot)

4) Worn off clutch housing causing the clutch to bind.

 

so depending on the cause, the corrective actions differs.

[red rocket]

Ic ic.. I didn't noe that. So for optimum performance on a 95' 916, any thickness or make would u recommend bro? i'm usin a 30.5mm clutch slave cyl.

 

Need to check the workshop manual.

 

I encounter this before when I bought the clutch pack for 916 for my 998. The pack thinkness is the same (916) but the 998 ones has an additional set of plates. Still can use but when you launch the bike the 916 plates slip more.

 

that's my experience