[Discussion] Super Four General Enquiry Thread

[syeDsTp]

If u nvr pull throttle engine will stall bro. Could it be carb not tuned properly?

 

 

 

Sent from my GT-N7000 using Tapatalk

[tiku]

If u nvr pull throttle engine will stall bro. Could it be carb not tuned properly?

 

 

 

Sent from my GT-N7000 using Tapatalk

 

my exp is no power even if full throttle.. then this is when my bike gona stall soon in few sec time... everytime i throttle when i feel no power it will stall later...initially the very first time it no power, there is a change in exhaust sound like either riding on a punctured tyre or chopper sound.. after wash tank no prob...nv touch my carb.. hav u tried washing tank? check ur vaccum tube not twist too

[4DToToBig Sweep]

Finding main stand for my 3

[syeDsTp]

U experienced the same thing as i do! Sound like chopper! How much u wash the tank bro?

[tiku]

U experienced the same thing as i do! Sound like chopper! How much u wash the tank bro?

 

i forgot 30 to 40?? cant rem cause hardly ppl wash tank... the shop i went ,price is higher than other shop, like normal spark , wash air filter they charge 12 each, 15 to wash.. so i think other shop should be cheaper... they say is due to water inside... so after wash, no issue liao

[Ah Jeff]

Guys,

 

I understand when we switch on our engine, Our S4 will auto on the headlight.

 

But, My understanding is that we can prevent this by install a switch that can allows u to manuel on ur headlight.

 

Do you have any idea that where to install & the price?

[FTW]

Just bought a Spec 1 few days back. Am a total noob so here is my question. How would I know if my fuel has touched the reserve of 3 liters?

 

Sent from my HTC Sensation Z710e using Tapatalk

[stwb1981]

Guys,

 

I understand when we switch on our engine, Our S4 will auto on the headlight.

 

But, My understanding is that we can prevent this by install a switch that can allows u to manuel on ur headlight.

 

Do you have any idea that where to install & the price?

 

i done mine already...

any proficient shop will be able to do it...

 

some do it with high beam light on when headlight is off (but when headlight on all is normal)

some do it vice versa...

 

Kindly use those bike engine on/off switch like honda SP type instead of those cheapo switch @$5 . trust me save u lots of trouble in the future....

I brought the engine on/off switch from LAB @ $32.... come with a electric start as well but useless lah...lol (From RVF, CBR)

 

Mount onto handlebar ok liao... gt chance i take a photo & put up here

[LXY]

Just bought a Spec 1 few days back. Am a total noob so here is my question. How would I know if my fuel has touched the reserve of 3 liters?

 

Sent from my HTC Sensation Z710e using Tapatalk

When the bar starting running from left to right at upright position.

[FTW]

When the bar starting running from left to right at upright position.

 

Alright thank you for replying.

 

Sent from my HTC Sensation Z710e using Tapatalk

[Nick87]

Hi All,

 

 

Please advice urgently as my handle bar of mY vtec 3 will shake to left and right when i use 1 hand to grab it when riding....

[calvin1991]

Hi All,

 

 

Please advice urgently as my handle bar of mY vtec 3 will shake to left and right when i use 1 hand to grab it when riding....

 

You no skill isit mate? Lol I think is your body posture la.

[bReakBone]

Hi Guys

 

need some advice. i just changed the battery one week ago cos that time i cannot start my bike. then again yesterday the bike cant start when i pressed the ignition key. The tank is half -full.

 

could it be the rectifier / spark plug problem?

anyone know the the price for a rectifier?

[stwb1981]

Hi Guys

 

need some advice. i just changed the battery one week ago cos that time i cannot start my bike. then again yesterday the bike cant start when i pressed the ignition key. The tank is half -full.

 

could it be the rectifier / spark plug problem?

anyone know the the price for a rectifier?

 

Could be starter replay oso....

Rectificer cost ard $100+ with install

Magnetic coil cost ard $300+ with install...

 

Want cheaper...

Go try yr luck @ FJT (Rowell Road)

thye sell Honda ORIGINAL parts @ very good pricing but it juz cash & carry lah...

Do the maths ....

 

I have a original main wire harness available

Used but in working condition.

Removed from my ride as I ordera brand new harness for my ride...

Doing a major refit...

Anyone keen call me...

 

Cheers!!!

[bReakBone]

Could be starter replay oso....

Rectificer cost ard $100+ with install

Magnetic coil cost ard $300+ with install...

 

Want cheaper...

Go try yr luck @ FJT (Rowell Road)

thye sell Honda ORIGINAL parts @ very good pricing but it juz cash & carry lah...

Do the maths ....

 

I have a original main wire harness available

Used but in working condition.

Removed from my ride as I ordera brand new harness for my ride...

Doing a major refit...

Anyone keen call me...

 

Cheers!!!

 

bike shop said my rectifier and coil maybe got problem and quote me $600plus if change both.

should i ask him to check the starter replay before changing rectifier?

[manbai]

Hi All,

 

 

Please advice urgently as my handle bar of mY vtec 3 will shake to left and right when i use 1 hand to grab it when riding....

 

Probably need to change your front wheel bearing.

[Nick87]

Any one can advice vtec 3 with box will make the handle bar unstable when riding in low speed any 1 face this problem

[danielling1981]

Any one can advice vtec 3 with box will make the handle bar unstable when riding in low speed any 1 face this problem

i think no bikes will become unstable just becoz mount box.

[stwb1981]

bike shop said my rectifier and coil maybe got problem and quote me $600plus if change both.

should i ask him to check the starter replay before changing rectifier?

 

wa.... sound ex....

shouldn't be so ex... i think...

what shop quote U

 

Any one can advice vtec 3 with box will make the handle bar unstable when riding in low speed any 1 face this problem

 

Unlikely mate....

i ride my PB1 low speed oso ok...

unstable as in shaking wildly or vibrate??

 

Steering Cone: sit on yr bike stationary. push with yr both leg then jam the front brake...

if U feel the cone area vibrate, move up or doen, left & right or any movement. high chance cone gone...

 

Front Wheel Bearing: park on mainstand, ask some one to push dw the the bike rear part. turn the handle bar to extreme right hold the tyre one hand in front one hand behind on tyre press in a forward & backward action one hand in opp direction.if gt movement, bearing spoil... repeat the same on the extreme left side....

 

that should be all...

 

there are extreme cases of the body frame having hair line crack which are untracable... this bike gt to scrape or change body frame...

but no frets as this usually happen to older bikes...

My kaki kana b4 once on a k2 1000

 

hope this help...

do ask around the rest of the gurus for advice as well...

I may nt be entirely right....

 

Cheers!!!

[syeDsTp]

Hi Guys

 

need some advice. i just changed the battery one week ago cos that time i cannot start my bike. then again yesterday the bike cant start when i pressed the ignition key. The tank is half -full.

 

could it be the rectifier / spark plug problem?

anyone know the the price for a rectifier?

 

Cannot start means no electric sound at all or gt crank but canot start? Mine no electric sound at all when press the ignition. What i do when that happens is tgat i go gear 1 and "mini push start" my bike and press the ignitiin again then gt the electric sound and can start..

 

Sent from my GT-N7000 using Tapatalk

[STRYKER]

Cannot start means no electric sound at all or gt crank but canot start? Mine no electric sound at all when press the ignition. What i do when that happens is tgat i go gear 1 and "mini push start" my bike and press the ignitiin again then gt the electric sound and can start..

 

Sent from my GT-N7000 using Tapatalk

 

Could be ur starter carbon den...coz i remembered ah pek saying if no cranking push ur bike den engage gear den neutral back and try cranking...if can crank means something to do with starter carbon...

 

Btw my fren riding spec 3,as i noe spec 3 meter needles will turn when switched on to initialize...but his aft the initialization,he crank start the bike & the meter needle turned again.any idea y???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

[Ah Jeff]

i done mine already...

any proficient shop will be able to do it...

 

some do it with high beam light on when headlight is off (but when headlight on all is normal)

some do it vice versa...

 

Kindly use those bike engine on/off switch like honda SP type instead of those cheapo switch @$5 . trust me save u lots of trouble in the future....

I brought the engine on/off switch from LAB @ $32.... come with a electric start as well but useless lah...lol (From RVF, CBR)

 

Mount onto handlebar ok liao... gt chance i take a photo & put up here

 

Hey Bro! Thanks for your advice!! Hopefully I can get to see the pics that u install.

[tiku]

 

Btw my fren riding spec 3,as i noe spec 3 meter needles will turn when switched on to initialize...but his aft the initialization,he crank start the bike & the meter needle turned again.any idea y???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

 

low batt liao

[STRYKER]

low batt liao

 

But can start ley...maybe the batt going to die soon uh...not enuff volts during cranking tats y uh....tanx tiku...

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

[tiku]

But can start ley...maybe the batt going to die soon uh...not enuff volts during cranking tats y uh....tanx tiku...

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

 

yes, gona die soon, get it change asap..