Honda Blackbird CBR1100 XX

[rezasmess]

correct me if im wrong but the max speed for running in is 140km/h.. can someone clarify for me...

 

Running in does not go by speed. It is more according to the RPM.

 

First 500km, do not exceed 3 rpm in all gears

 

Next 500km, do not exceed 4.5 Rpm

 

Next 1000km (not everyone do this), do not exceed 6 Rpm.

 

After 2000km running in, reach your firdt 299kmph.

 

 

Sent from my iPhone using Tapatalk

[JbAtRaCeR]

From what i know running in is needed when you change to new piston and rings...The idea is to get the rings seated properly to avoid piston scuffing due to unseated rings..

 

Since you just change only the conrod and crankshaft bearings,i dont see the need of running in...You can whack the bike bro...hehehe!!

 

Hyperpro vs ohlins...of course lah ohlins syiok...Bling Bling factor and tuneability(can tune like siao but our front fork are not adjustable)...but i stick to hyperpro..within my budget range...less tunability(preload and rebound)...

[BB779]

Hi all,

 

Anyone knws wae i cud get side panniers for bb? Motoworld doesnt bring in anymore.

[stwb1981]

i think stock fork springs are better.. am using hyperpro now..

 

From what i know running in is needed when you change to new piston and rings...The idea is to get the rings seated properly to avoid piston scuffing due to unseated rings..

 

Since you just change only the conrod and crankshaft bearings,i dont see the need of running in...You can whack the bike bro...hehehe!!

 

Hyperpro vs ohlins...of course lah ohlins syiok...Bling Bling factor and tuneability(can tune like siao but our front fork are not adjustable)...but i stick to hyperpro..within my budget range...less tunability(preload and rebound)...

 

Stock fork spring is gd enuf le...

unless gt budget... y not change the spring....

but since ours is nt adjustable... change spring is to make it stiffer or juz add stiffer oil using stock spring oso can...

or can get those valves kit fr k-tech to do those adjustable types but ain't cheap...

up to individual...

 

K lah dun say I'm the man lah... pai say leh....

Well as long i can assist, I will galdly assist mates...haha

Cheers!!!

[blue jellyfish]

Guys,when new bike are produced,they are tested at high revs in all gears before leaving the factory,its better to crack in the factory than with the customer.If the batch fails,they will stop the ongoing batch for inspection.Some sort like QC la.

So running in juz do gradually from 80 - 90 - 100 - 120 - 140 - 200 - 299.

 

Wahhh ..bro ... got to wait long - long for running in ahhhhh ....

[blue jellyfish]

Hey fellow BB riders .. do read this link ... Sujak shared with me and i tink its important for all BB hard core riders to know tis too

 

http://www.visordown.com/motorcycle-top-10s/top-10-sports-tourers/11412-11.html

 

BLACKBIRD IS THE BEST SPORTS TOURER !!!!!!!!!!!!!!!!!!!!!!!!!

 

n im proud to own 1 ...

[zainuddin]

Got bb recrifier for sale At $90... Its for bb 1st batch of FI model. Sms Me At 93698776

[rezasmess]

Hi all,

 

Anyone knws wae i cud get side panniers for bb? Motoworld doesnt bring in anymore.

 

If u looking for OEM side pannier

Check out davidsilver spares, do a google search.

 

 

Sent from my iPhone using Tapatalk

[rok_yantzen]

Thank u all for the info about running in....But is it normal for BB to have rough vibration after overhaul?

The vibration is greater but of course the engine sound is more smoother.......changing gears is damn smooth.......

[JbAtRaCeR]

Thank u all for the info about running in....But is it normal for BB to have rough vibration after overhaul?

The vibration is greater but of course the engine sound is more smoother.......changing gears is damn smooth.......

 

BB have one of the smoothest engines...you might want to check on you counterbalancer...maybe shop does'nt adjust it properly after overhauling the engine...

[rok_yantzen]

BB have one of the smoothest engines...you might want to check on you counterbalancer...maybe shop does'nt adjust it properly after overhauling the engine...

 

hmmmm...wad mean by counterbalancer?

[JbAtRaCeR]

hmmmm...wad mean by counterbalancer?

 

In our bb engine there is a two counterbalancer...Its purpose is reduce vibrations from the engine's crankshaft movement....

 

Here's someting to read on twin counterbalancer...

 

 

 

http://www.autozine.org/technical_school/engine/smooth2.htm

 

 

And on the service manual of our bb(for FI models) there is a guide for adjusting the counterbalancer backlash page 12-22 to 12-23...You might want to print this out and show it to the mechanic that does your bike...Hopefully all they need is just to adjust the backlash to specs...

Edited July 25, 2011 by JbAtRaCeR

[sujak]

its going to rain soon.. ride safe bros..

[greysnail]

Hi there guys,seeing crickets jumping here and there.....guess all are bizi with daily schedule.

Juz a heads up,ride safe and remember to bring ur raincoats coz weather kinda unpredictable aite......til we meet again.

[sujak]

weather check update.. its super duper sunny now!! haha...

[sujak]

Hi there guys,seeing crickets jumping here and there.....guess all are bizi with daily schedule.

Juz a heads up,ride safe and remember to bring ur raincoats coz weather kinda unpredictable aite......til we meet again.

 

 

yea bro.. suddenly it becomes so quiet...

[STRYKER]

guys any idea how much does the akra encan for '99 bb??

[AeROSmitH]

yooohoo~~ eh i recently changed my brake hoses......then i realize now the calipers sometimes like never fully release when i never depress my brakes.....so when i push the bike stationary....it will feel like brake is applied~....does it mean they screwed up the cbs!?!?

[greysnail]

yooohoo~~ eh i recently changed my brake hoses......then i realize now the calipers sometimes like never fully release when i never depress my brakes.....so when i push the bike stationary....it will feel like brake is applied~....does it mean they screwed up the cbs!?!?

 

High chance they never do a proper job bro,i suggest u go back and ask them to reflush back the brakefluid coz it may cause ur disc to warp.Mebbe Jbatracer can help....he is afterall our official BB mechanic.Who noes he may install a forklift piston to his BB...wakakakakaka

[man simei]

bro,the akra end can is aronud $1300 its better you check with rahman he knows the guy who sell akra end can.

[kraikk]

Hi guys I was wondering what is the current price range of a ~10 years old Blackbird with renewed COE?

[hamsterwhale]

Hi guys I was wondering what is the current price range of a ~10 years old Blackbird with renewed COE?

bought mine at 8.8 inclusive of COE renewal at 1.5k...01 model

[STRYKER]

bought mine at 8.8 inclusive of COE renewal at 1.5k...01 model

 

Just got myself a '98 model for 7.8k coe till 2019 with tank bra,headlight protector,steelbraided clutch hose...8.8k for '01 model shud be alright i guess...saw an FU plate at looi with micron pipe tank bra and airbrushed paintwerk for 8k coe due nxt yr may.saw anonther one FU plate also at Teo spray stock cond,selling 9k with renewed coe.

[STRYKER]

endcan only 1.3k...other den akra,scorpion and yoshi what other pipes st legal for '98 model bro?

Im a noobie on b.b...

[sujak]

Just got myself a '98 model for 7.8k coe till 2019 with tank bra,headlight protector,steelbraided clutch hose...8.8k for '01 model shud be alright i guess...saw an FU plate at looi with micron pipe tank bra and airbrushed paintwerk for 8k coe due nxt yr may.saw anonther one FU plate also at Teo spray stock cond,selling 9k with renewed coe.

 

The FU plate at Teo Spray has a long history.. It belongs to our BB Thead Starter R1szuan, and then bought by Wallaby and sold off to Bluewitch's friend.. Now I wonder who is going to take over that bike...