Kawasaki KRR150 Riders

[Guest FireSpitter]

Originally posted by at0m87@Aug 17 2005, 08:37 PM

hiaz.. so sianz.. i got no riding KAKI !! urgghhh.... so bored.. so sianz.. got bike no one pei go out tgt... hiaz................ =S

enjoy this time as self practice instead. To be a better rider than you are, you need to clock more mileage. Riding alone may not be that bad an idea after all because riding in a group also means more kopi stops and that will take away time that was meant for riding.

 

Ride around more, familiarise yourself with the bike, with the (Horrendous) Singaporean driving/riding behaviour and the routes of Singapore.

[patrick1131]

yea... finally get my hose changed @vectorone and top up break fluid ....

the password "eddy sent me here" same price aso HKL but the boss quite a nice guy la ...

[patrick1131]

Originally posted by FireSpitter@Aug 17 2005, 05:13 PM

I presume your piston is already cleaned, hence nobody can "piston read" it.

 

Also it would be quite impossible to tell as by right, pistons are measured for wear (in microns I think) then a replacement is considered at this point. Unless again , the piston is not cleaned and can be "piston read" to see any symptoms. A good running engine can easily last 60,000 to 80,000 km minimum with good care.

omg ... took the pics at wrong time...

next time will take it before he clean lol ... 10,000km later ..right?

[patrick1131]

Originally posted by spy69@Aug 17 2005, 07:32 PM

1. im thinking of switching to Maxima Extra 4 EO 15w50. does it helps in 'improving' my engine condition??

2. do my top speed gets higher?

2. any idea of places doing gd overhaul in spore & jb? the prices??

3. what do they change when doing overhaul??

 

thanxx in advance (kR seniors pls guide me)

er..1st of all I am not a senior..i just passby only//

1. i dun think any EO can improve engine condition .. they can only protect ur engine from being further wear and tear..

2.by doing full service does gain back more power .. but for my bike .. i only feel the difference for 2 weeks maybe i am used to the power liao

3.done mine at racewerk ..the best price i found in s'pore $90

they will flush coolent ,change spark plug and gasket for u ...

[at0m87]

Originally posted by FireSpitter@Aug 17 2005, 10:02 PM

enjoy this time as self practice instead. To be a better rider than you are, you need to clock more mileage. Riding alone may not be that bad an idea after all because riding in a group also means more kopi stops and that will take away time that was meant for riding.

 

Ride around more, familiarise yourself with the bike, with the (Horrendous) Singaporean driving/riding behaviour and the routes of Singapore.

ya i got lost on the expressway today.. took the wrong one.. den again the wrong one.. got no sense of directions at all.. den go back to u turn den took the expressway and it is longer den the bus route way home.. tiring.. =S

[at0m87]

izzit true dat southern , new southern and albert motor in AV are black shop?

[patrick1131]

Originally posted by at0m87@Aug 17 2005, 10:28 PM

izzit true dat southern , new southern and albert motor in AV are black shop?

be careful ya

just don't go too fast .. don't go too slow aso

[Guest FireSpitter]

Originally posted by at0m87@Aug 17 2005, 10:28 PM

izzit true dat southern , new southern and albert motor in AV are black shop?

Wow.... the last time I've been to those shops, I thought their walls were white?!

[patrick1131]

Originally posted by FireSpitter@Aug 17 2005, 10:40 PM

Wow.... the last time I've been to those shops, I thought their walls were white?!

now they business good mah ..

oil spill all over workshop liao

[patrick1131]

i shd have asked benard if eddy is handsome ....

[at0m87]

haha i mean do dey like chop ppl alot.. esp the noobs..? yahh...

[patrick1131]

Originally posted by at0m87@Aug 17 2005, 11:00 PM

haha i mean do dey like chop ppl alot.. esp the noobs..? yahh...

for me .. i think all are the same ..

how i wish i can take out my p plate before going motordiam ...

[at0m87]

ya but i know the ppl from new southern.. actually quite a few from AV.. most i konw dem one... dunno will dey still chop me $$ cos i P plate too.. but i know dem well la.. one even offered to let me trial the mod pipe.. yeahh.. say exchange for me and see if i like it anot.. if like dey go mod dun like den dun mod.. yay !!

[Guest FireSpitter]

Originally posted by patrick1131@Aug 17 2005, 10:50 PM

i shd have asked benard if eddy is handsome ....

Have you got a pretty chick to recommend to him?

[patrick1131]

Originally posted by at0m87@Aug 17 2005, 11:09 PM

ya but i know the ppl from new southern.. actually quite a few from AV.. most i konw dem one... dunno will dey still chop me $$ cos i P plate too.. but i know dem well la.. one even offered to let me trial the mod pipe.. yeahh.. say exchange for me and see if i like it anot.. if like dey go mod dun like den dun mod.. yay !!

lol ... then u got ask him bend down for u??

if he likes can bend 2 time 3 times aso nvm

[patrick1131]

Originally posted by FireSpitter@Aug 17 2005, 11:18 PM

Have you got a pretty chick to recommend to him?

yea.. saw a yellow ducati 999s there ... but one guy more horny .. he go 1st before u in front of everybody ... but nvm 999s got 2 holes

[at0m87]

Originally posted by patrick1131@Aug 17 2005, 11:19 PM

lol ... then u got ask him bend down for u??

if he likes can bend 2 time 3 times aso nvm

huh wat bend down? =S

[razorblade41]

Originally posted by patrick1131@Aug 17 2005, 11:23 PM

yea.. saw a yellow ducati 999s there ... but one guy more horny .. he go 1st before u in front of everybody ... but nvm 999s got 2 holes

eh pls....dun go . this is a kawa thread.....not some gay thread.

 

don, sold ur kawa alr??

[Guest FireSpitter]

Originally posted by patrick1131@Aug 17 2005, 11:23 PM

yea.. saw a yellow ducati 999s there ... but one guy more horny .. he go 1st before u in front of everybody ... but nvm 999s got 2 holes

The "holes" in the 999 is too small to accomodate my tra la la....

[razorblade41]

Originally posted by FireSpitter@Aug 18 2005, 10:30 AM

The "holes" in the 999 is too small to accomodate my tra la la....

speaking abt class 2 bikes...wat is ram air?

 

how to check whether exhaust is hollow or not? i hear other kawas on idling mode like very soft sound...mine's like quite loud.

[razorblade41]

Originally posted by patrick1131@Aug 17 2005, 11:02 PM

for me .. i think all are the same ..

how i wish i can take out my p plate before going motordiam ...

noobs and p plates always get chopped

[Guest FireSpitter]

Originally posted by razorblade41@Aug 18 2005, 10:35 AM

speaking abt class 2 bikes...wat is ram air?

 

how to check whether exhaust is hollow or not? i hear other kawas on idling mode like very soft sound...mine's like quite loud.

RAM Air works when there is high velocity air (Usually above 160km/h) . Notice Ram-Air assisted bikes usually have a gaping hole somewhere in the front fairing, this tunnel leads into the airbox. The idea is to force feed air into the carbs. Hope this helps your understanding.

 

Original exhaust mufflers are usually mechanical baffled designs meaning there are internal 3 chamber routings etc.. This helps reduce exhaust noise. There are many guys that use a steel rod and puncture through the plates "to get a straight path", hence increasing noise.

[Guest FireSpitter]

Originally posted by razorblade41@Aug 18 2005, 10:37 AM

noobs and p plates always get chopped

Everybody has their fair share during the noob stage to get "smoked" once in a while. Hopefully through these experiences, we learn and "grow up".

 

Secondly, it really depends what chopped means? For some is because they paid $1-$5 more than another shop would charge....

[razorblade41]

Originally posted by FireSpitter@Aug 18 2005, 11:29 AM

RAM Air works when there is high velocity air (Usually above 160km/h) . Notice Ram-Air assisted bikes usually have a gaping hole somewhere in the front fairing, this tunnel leads into the airbox. The idea is to force feed air into the carbs. Hope this helps your understanding.

 

Original exhaust mufflers are usually mechanical baffled designs meaning there are internal 3 chamber routings etc.. This helps reduce exhaust noise. There are many guys that use a steel rod and puncture through the plates "to get a straight path", hence increasing noise.

thx bro..understand more abt RAM air alr. thx

 

y would they wanna puncture it?

[razorblade41]

Originally posted by razorblade41@Aug 18 2005, 12:16 PM

y would they wanna puncture it?

to increase top speed or pick up speed?