Honda ST1100

[azaryRR]

hey guys...!!

 

need ur approval to join u guys...

 

i just got my ST...n i love it

 

been to gopa last 2days...the kedai looks like chopshop heh..? hihi...

 

his bike is great...3months never start, can still easily start...hallawehh...

 

 

p/s: oso did heard bout goppa...hmm dunno wat to say...

[cbkooky]

hey guys...!!

 

need ur approval to join u guys...

 

i just got my ST...n i love it

 

been to gopa last 2days...the kedai looks like chopshop heh..? hihi...

 

his bike is great...3months never start, can still easily start...hallawehh...

 

 

p/s: oso did heard bout goppa...hmm dunno wat to say...

 

congrats on your ride. try out couple of shops and choose best that you are comfortable with. There are many shops out there that can also service St1100...You riding a euro model?

[vespaboy]

hey guys...!!

 

need ur approval to join u guys...

 

i just got my ST...n i love it

 

been to gopa last 2days...the kedai looks like chopshop heh..? hihi...

 

his bike is great...3months never start, can still easily start...hallawehh...

 

 

p/s: oso did heard bout goppa...hmm dunno wat to say...

 

Welcome to the club - from a newbie also.

Also went to Gopa for servicing.

My only complaint about the ST11 is that at standstill - it is a fairly heavy bike to put on mainstand - haven't really got used to the "technique" yet...but on the road - wow! you should go take a spin around South Bouna Vista Road - handles like a dream around the curves and hairpins.

[vespaboy]

thanks bro for the tip...will try it..

[SMOKEYPIPE]

would'nt the autosol be too abrasive & contribute fine lines ?? I use wax , car body wax then also water seems to float away during rain

[azaryRR]

congrats on your ride. try out couple of shops and choose best that you are comfortable with. There are many shops out there that can also service St1100...You riding a euro model?

 

yup..its US model one...im happy with it..but i have to tighten myb the cone n steering bearing...its shaky when i do free hand...

 

thanx mate...which bikeshop oso u personally recommended...?

[azaryRR]

Welcome to the club - from a newbie also.

Also went to Gopa for servicing.

My only complaint about the ST11 is that at standstill - it is a fairly heavy bike to put on mainstand - haven't really got used to the "technique" yet...but on the road - wow! you should go take a spin around South Bouna Vista Road - handles like a dream around the curves and hairpins.

 

lucky me bro...

 

im been taught how to mainstand the bike..its easy but really heavy..!! like baby hippo..!!

how to check steering stability...wahh...i need to learn alot lah...

 

guys...what is the correct air pressure for the tyres huh..?

for daily use...n touring maybe..?

[edfck]

wax will onli bring out the shine but will not get rid of fine scratch. u can use autosol to polish of fine scratch then use wax 2 shine it. try it on a small area 1st. u will b able 2 c the difference.

[cbkooky]

wax will onli bring out the shine but will not get rid of fine scratch. u can use autosol to polish of fine scratch then use wax 2 shine it. try it on a small area 1st. u will b able 2 c the difference.

 

tested and proven on my previous windshield.Try on the small area first if doubts.

[amen23]

To:azaryRR

Normal:front 38 back 42psi toruing also the same but some go for

touring front 36 back 40psi

 

To: vespaboy

You looking for wire intercomm or wireless intercomm...

[kn2i]

Is the newer version (like '02) shock absorber compatible to 95 model?

[zinc11]

post edited.

Edited March 11, 2009 by zinc11

[Simon Soh]

To:azaryRR

Normal:front 38 back 42psi toruing also the same but some go for

touring front 36 back 40psi

 

 

for what tire size..?

[Simon Soh]

Is the newer version (like '02) shock absorber compatible to 95 model?

 

all the same.

 

I think there's difference with ABS model, maybe botakmonk could enlighten us, he has gone thru quite a bit with it.

[vespaboy]

To:azaryRR

Normal:front 38 back 42psi toruing also the same but some go for

touring front 36 back 40psi

 

To: vespaboy

You looking for wire intercomm or wireless intercomm...

 

either - whichever's that cheaper and works.. ha ha!

[Aurium]

dear st riders,

 

i'm organising a day trip to camerons.

to there and back in the same day, so we'll be cruising rather fast.. as such, i'm organising this trip by invitation only.

i do hope u all can let me know if u're interested so i can set a date for everyone.

 

cheers,

aurium

[Yzf_R1]

dear st riders,

 

i'm organising a day trip to camerons.

to there and back in the same day, so we'll be cruising rather fast.. as such, i'm organising this trip by invitation only.

i do hope u all can let me know if u're interested so i can set a date for everyone.

 

cheers,

aurium

 

When??????

[Stourer]

Hi Guys,

I have a used original rear shock absorber to give away FOC,the bushing at the top mounting part was broken and the sponge @top worn off,you need to find and replace the bushing yourself from old shocks or try to source it somewhere. Also you'll need to get the securing bolt.

 

Bought a new one cos been hearing clinking noise,after removal by my mech then saw the bush was broken. Shock was checked and found is still in good condition but have to clean it abit. For those with a tight budget,you just have to find the bushing yourself to save abit $.

 

Self collect @SK if interested. I'll be going up north this weekend,will only be able to reply after 29Mar.

 

Thanks.

[BotakMonk]

Is the newer version (like '02) shock absorber compatible to 95 model?

 

all the same.

 

I think there's difference with ABS model, maybe botakmonk could enlighten us, he has gone thru quite a bit with it.

 

hahaha simon when come out la kopi?! u so busy earnin milk powder $ till neglect us le.

 

my 01 TCS/ABS/CBS model de comes stock with black colour rear spring instead of the normal blue colour one. service manual(pic attached) shows the diff in size of the springs btwn ABS & non-ABS model. ABS version springs will be harder and stronger due to extra weight of the bike.

 

i was riding 2up most of the time when i 1st got my bike so i backside itchy go change to aftermarket hyperpro springs for both front and rear. bad move! the aftermarket springs were simply too freaking hard. can feel every single bump on the road.

 

kn2i n other fellow ST11 owners can take reference of my bike settings before deciding whether u need aftermarket springs or just replacement back to original shocks again.

 

my settings for the bike since hyperpro springs were installed:

1st few mths of installation

- rear spring ultra hard

- ride till wanna cry with/without pillion

- with 1st click(default was at click 3) compression on the rear shock, rebound set min or max also no diff

- front spring too stiff and long, front of whole bike raised, light beam shining higher

- front spring fantastic for all kinds of terrains

- rear spring big headache

 

after 6mths - now

- rear spring still super hard when riding without pillion

- rear spring seasoned for riding with pillion

- fantastic for smooth highways n twisties without bumps

- STILL @ 1st click(default was at click 3) compression on the rear shock, rebound set min or max also no diff

- front spring still as good, just raising front of bike too much

- already gotten use to the extreme craps it gives on bumpy roads

 

average weight taken on bike with hyperpro springs:

- without pillion with luggage ard 120+kg(good as long dun get too bumpy roads)

- with pillion with luggage ard 170+kg(smooth like butter, no complains)

- tried b4 with pillion n luggage ard 250+kg, 1st click compression on the rear shock, rebound set min or max also no diff. this is how freaking hard the aftermarket springs can be!!!(no kick or stress for the spring)

 

took me a long time to get used to the hard front n rear aftermarkets. nearly crashed coupled of times due to freakin hard springs on uneven terrains at cameron highlands n PG.since most ST11 is almost decade old, unless u intend to ride another decade, aftermarket springs might be overkill. if anybody interested to try fixing my ABS springs on non-ABS ST11 can pm me, if it suits ur requirements i can sell it off at a good price.

 

 

Stock springs stats

http://www.picturesky.com/albums/userpics/12609/ST%20front%20spring.JPG

http://www.picturesky.com/albums/userpics/12609/normal_ST%20rear%20spring.JPG

 

Stock ABS/TCS/CBS spring

http://www.picturesky.com/albums/userpics/12609/rear%20resize.JPG

 

Aftermarket Hyperpro spring(purple colour)

http://www.picturesky.com/albums/userpics/12609/normal_DSC00159.JPG

[gunshead]

hello people

 

need a kind favour from you

 

please do let me know

 

Could you kindly find out where I can buy Honda ST1100 parts

 

both new & second-hand?

 

The second hand parts include

a dual seat,

foot pegs for the pillion and

grab rails for the pillion.

 

My bike presently is a single seater and I would like at some point fix a dual seat.

Let me know. See pic of bike in the attachment.

[cbkooky]

hello people

 

need a kind favour from you

 

please do let me know

 

Could you kindly find out where I can buy Honda ST1100 parts

 

both new & second-hand?

 

The second hand parts include

a dual seat,

foot pegs for the pillion and

grab rails for the pillion.

 

My bike presently is a single seater and I would like at some point fix a dual seat.

Let me know. See pic of bike in the attachment.

 

 

Mean looking machine you have there with the lights. YOu can buy new/used parts at ebay.uk or davidsilverspares. google it online. Both cater to st11/13 parts as their country using our workhorse for their police bikes.

[gunshead]

thank you sir

 

however, I am looking for the parts in singapore shops.

 

I just wish to know the shops that people go to get spare parts in singapore.

 

i need the name and contact number. The rest I will do calling and ordering.

 

so where the shops specialize more in honda part ?

 

ebay and online shops are exepensive including shipment price and not sure if customs import duty.

[cbkooky]

thank you sir

 

however, I am looking for the parts in singapore shops.

 

I just wish to know the shops that people go to get spare parts in singapore.

 

i need the name and contact number. The rest I will do calling and ordering.

 

so where the shops specialize more in honda part ?

 

ebay and online shops are exepensive including shipment price and not sure if customs import duty.

 

Then you can try Everscuccess , FJT Parts , Boon Siew Honda Agent all in Sg.All New stuff.

 

Company Name : F J T Parts & Accessories Pte Ltd

Category : Motorcycles

Type : Motorcycles & Motor Scooters -Supplies & Parts - Whsle & Mfrs 164160

Address : 15 Rowell Rd

Product & Services :

 

 

Fax : ----

Tel : 63925928

____________________________________________________________

Ever Success Auto Parts17 Lembu Road, 208450, Singapore

 

p: 62925909,62970138 f: 62934741

 

http://www.eversuccess.com.sg

____________________________________________________________

 

BOON SIEW SINGAPORE PTE LTD

 

Address 75 Bukit Timah Road, #01-01

Boon Siew Building, Singapore 229833

Contact

Showroom

Parts Centre

Service Centre

Marketing

65 6339 9002 (O) / 65 6333 4332 (F)

65 6210 5093/4

65 6210 5081

65 6210 5099

65 6210 5092

 

Email

Showroom

Parts Centre

Service Centre

Marketing

Feedback

[email protected]

[email protected]

[email protected]

[email protected]

[email protected]

Operating Hours

Monday to Friday

Saturday (Showroom)

0830hrs - 1800hrs

0900hrs - 1230hrs (Service & Parts)

0830hrs - 1730hrs

0830hrs - 1230hrs

[gunshead]

Thanks cbkooky.

 

SO KIND OF YOU .

 

I contacted them but they say headache to deal with modfied bikes. One shop said need to see catalog and order from japan.

All of them also don't want to tell cut shops.

 

To get new , it seems expensive and not worth it.

I wonder those st1100 scraped or accident.

 

There must be a cut chop chop shops in spore.

 

I wonder where are all cut -shops in spore.

 

I am looking more for cut-shops in Singapore where I can buy it off the shelf.

 

The second hand parts include

a dual seat,

foot pegs for the pillion and

grab rails for the pillion.

[cbkooky]

Honestly...ebay uk has a list of these stuffs. But of course , if cost is a factor then not a viable option. Can try Gopa at Ang Mo Kio repairing St..maybe he has loose parts for sale or try local scrapyard/.