[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[Ah Pek]

Hello bros, anyone know where to service ver s front brake pump? Mine the piston was stuck so pulled it out using screwdriver and damaged the rubber seal around it in the process. Now i press front brake the there will be a drop of brake fluid from the small hole in the rubber seal.

 

Most mototiam who does S4 bikes can do lah..go Ah Fook lor.

[eddie_ash]

bros, my fren is riding a non- vtec model but the outlook all look like vtec,eg the pipe, swingarm ect all looks the same as a vtec one, what model is dat? plus it comes with a original 4 in 1 header..

[eddie_ash]

is the headers interchangeable with our version s or r?

[Ah Pek]

is the headers interchangeable with our version s or r?

 

Don't change it...its the best u can have. All other version are 4-2-1.

[Ah Pek]

bros, my fren is riding a non- vtec model but the outlook all look like vtec,eg the pipe, swingarm ect all looks the same as a vtec one, what model is dat? plus it comes with a original 4 in 1 header..

 

Its one of those 'customised' S4 model from SCDF I believe. Comes with Japan Steel 4-1 header (best!).

[kmjoe]

i jus bought a ver s and i kno nothing about s4... hope u guys can enlighten me =)

 

1) how much and where can i find the rack for e21 side panniers? i kno some might say ah boy, but their workmanship is u know i know =P

2) i see some setup with e21 slanting downwards due to the exhaust, while some position the panniers higher so as to make them look straighter, which would be ezier and more comfortable for my pillion?

3) where can i find this head/windshield? and how much is it? anyone use this b4, got review about it?

http://i8.photobucket.com/albums/a20/kmjoe/sticker0.jpg

4) what are belly pan for? o.O jus cosmetic or there's actually use for it

5) i'm looking for something which can protect my leg, is there such crashbar for s4? coz my crash bar on my phantom saved me couple of times (including accidental drops, wun wan tt happen to my s4, duno got strength pick up anot =.=")... would like to have that on my s4

6) is there anyway to secure the front brakes? i heard alot of stories of stuff getting "borrowed"

7) the suspension that came with my bike is not even showa... its like some cheapo suspension, will it affect my ride? this is how it looks http://i8.photobucket.com/albums/a20/kmjoe/suspensionzz.jpg

Edited February 20, 2011 by kmjoe

[limkim]

Hi,

 

just wondering where can I service my air filter? I have not clean it for close to 40km. I am using K&N one.

 

Thanks Thanks

[Ah Pek]

Hi,

 

just wondering where can I service my air filter? I have not clean it for close to 40km. I am using K&N one.

 

Thanks Thanks

 

Don't waste $s..many has asked me to do it. There is nothing really that u need to clean. The most..next time u at abike shop doing somethig, just borrow their air compressor gun air blower and blast_blast (free lah). If you have to..just mixed kerosene (85%) and soap power water (if you got $$s..go get a spray can degreaser) and scribe wif a umwanted tooth brush and rinse. After taht, left dry overnight. Before putting back...just coat it with a light layer of oil like "Singer" or fork oil...ur mother kitchen cooking corn oil oso can (it just to trapped the dust). Don't waste $$s on so call recharge kit. Anyway..the air in SIngapore road is very clean and free of flying debris and insects these days..your K&N or Simota won't need any cleaning for athousands of km...the instructtion says "50,000 miles" in in Km..that's 80467.2 kilometer!

[kmjoe]

is there such thing as after market ABS for version s?

[limkim]

Don't waste $s..many has asked me to do it. There is nothing really that u need to clean. The most..next time u at abike shop doing somethig, just borrow their air compressor gun air blower and blast_blast (free lah). If you have to..just mixed kerosene (85%) and soap power water (if you got $$s..go get a spray can degreaser) and scribe wif a umwanted tooth brush and rinse. After taht, left dry overnight. Before putting back...just coat it with a light layer of oil like "Singer" or fork oil...ur mother kitchen cooking corn oil oso can (it just to trapped the dust). Don't waste $$s on so call recharge kit. Anyway..the air in SIngapore road is very clean and free of flying debris and insects these days..your K&N or Simota won't need any cleaning for athousands of km...the instructtion says "50,000 miles" in in Km..that's 80467.2 kilometer!

 

Haha so i have another 40km to go. Thanks for advise.

 

Sometime we do that because of mental rather than technical. Just like your engine oil. You recommend us to go beyong 10km but there are still a lot wanna change before that right hehe.

[Ah Pek]

is there such thing as after market ABS for version s?

Better not even if there is..but there is.

[Ah Pek]

Haha so i have another 40km to go. Thanks for advise.

 

Sometime we do that because of mental rather than technical. Just like your engine oil. You recommend us to go beyong 10km but there are still a lot wanna change before that right hehe.

 

 

Actually more than that unless you frequent West Malaysia a lot. You can find all kinds of insects and debris more often than usual. EO?..u should talk to those that comes back fro 15k-39k...LOL!

[kano]

Actually more than that unless you frequent West Malaysia a lot. You can find all kinds of insects and debris more often than usual. EO?..u should talk to those that comes back fro 15k-39k...LOL!

 

how ah pek

think i hitting 5k liao with ur EO liao

somemore go west malaysia often

how still can continue to 10 k km bo?

somemore RPM is lower then the S4.

 

Thanks Ah Pek

[pish]

hi, juz wondering will if i use my high beam to ride rather than the normal one...is there any bad outcomes that might hapen to the bike in the long run like maybe batt life span shorter or anyting lah....coz i notice that riding with a high beam i feel much safer and it seems vehicles notice bright lights wakakakakaka

[Ah Pek]

how ah pek

think i hitting 5k liao with ur EO liao

somemore go west malaysia often

how still can continue to 10 k km bo?

somemore RPM is lower then the S4.

 

Thanks Ah Pek

 

If I were u, will go ahead...should be no problem..its formulated for that kind of task..S4 or not. Touring bike less stress. Been use on a Kawa GTR Concorse before on frequent trips.

[Ah Pek]

hi, juz wondering will if i use my high beam to ride rather than the normal one...is there any bad outcomes that might hapen to the bike in the long run like maybe batt life span shorter or anyting lah....coz i notice that riding with a high beam i feel much safer and it seems vehicles notice bright lights wakakakakaka

 

Its good that u do that as it uses both filaments...but don't stretch the usage too long.Switch over to low beam once in awhile.

[kano]

If I were u, will go ahead...should be no problem..its formulated for that kind of task..S4 or not. Touring bike less stress. Been use on a Kawa GTR Concorse before on frequent trips.

 

okok power

yesterday went to ah fook check my front fork whether got problem cuz still bumpy

he never test ride but check the front wheel and fork no prob say "Hen Mei"

ask me go back to the shop where i changed the front fork and seal but i never go

 

instead went to Ah Hai (well known) at Sin Boon motors

he say the damping? rebound? rate fast and found it soft

somemore when release the left and right fork oil, one is black, one is white

he changed the fork oil with the required amount to fill the left and right fork

haha now feels better

[kmjoe]

not sure if anyone ask this.. how many liters of reserve does a ver s have? full tank is 18l ya?

[thrasher]

Its one of those 'customised' S4 model from SCDF I believe. Comes with Japan Steel 4-1 header (best!).

 

wah that guy is super duper lucky man!

[Ah Pek]

not sure if anyone ask this.. how many liters of reserve does a ver s have? full tank is 18l ya?

 

3 litres..on average..can do 60+ km to the nearest kiosk.

[kmjoe]

3 litres..on average..can do 60+ km to the nearest kiosk.

 

ok thks alot! =) btw my trip meter's pin is gone since previous owner, anyway to replace it?

[whoisdat]

Ah pek.. need your opinion..

 

Recently i have hearing like grinding+knocking sounds from the bike when i am riding it.. especially during low speeds n low RPMs. And when riding, i can feel like a ticking feel(something like something got stuck in the tyre but tyre is fine).

Could it be caused by a loose chain?, coz when i touch the chain it feels loose. (but i also dunno how tight it should be in the first place)

[Ah Pek]

ok thks alot! =) btw my trip meter's pin is gone since previous owner, anyway to replace it?

 

Tough to get a replacement. Don't think they sell the stalk dial. If I were u..go claim a replacement unit from the seller.

[Ah Pek]

Ah pek.. need your opinion..

 

Recently i have hearing like grinding+knocking sounds from the bike when i am riding it.. especially during low speeds n low RPMs. And when riding, i can feel like a ticking feel(something like something got stuck in the tyre but tyre is fine).

Could it be caused by a loose chain?, coz when i touch the chain it feels loose. (but i also dunno how tight it should be in the first place)

 

 

Go check ur back wheel bearings first. Just leverage the back wheel up and grab the tire while rocking left and right. If it moves..the bearings gone liao. Do the same for the front wheel bearings but this time..rotate it..if can feel grinding..oso need replacement liao.

[kmjoe]

Tough to get a replacement. Don't think they sell the stalk dial. If I were u..go claim a replacement unit from the seller.

 

thks agn =)