[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[Jehuty]

Anyone keen to sell their PB1 header?

[boy_yuz32]

Im sellin my revtec impedence stabiliser n pivot voltage stabiliser.. anybody keen? Pls pm me..

 

Sent from my Nokia 3210 using Tapatalk2

[HaiR1]

Upppzzzzzz for AhPek....

 

 

Power lh my bike yest u do...

[mark1979]

For cb400 rear showa shock

Add spacer for hard

Interested people pls SMS me...

Not for fussy people...thanks.http://img.tapatalk.com/dcff0143-3242-2e84.jpghttp://img.tapatalk.com/dcff0155-325f-72e2.jpghttp://img.tapatalk.com/dcff011b-326e-ba3b.jpghttp://img.tapatalk.com/dcff012e-328d-8e07.jpghttp://img.tapatalk.com/dcff013e-32a2-eeed.jpghttp://img.tapatalk.com/dcff0142-32ae-873c.jpghttp://img.tapatalk.com/dcff0124-32c3-3fbe.jpghttp://img.tapatalk.com/dcff0133-40fc-a64f.jpghttp://img.tapatalk.com/dcff0110-41cf-a6c4.jpg

Untuk mengetahui maklumat yang lebih lanjut...

Sila SMS me. 8l22,8o82

 

Upssssssssssss

[roderick]

Hi all, any one selling a givi e21 for left side by any chance? ^^

 

Prev owner had a fall and left with only right side.

[stwb1981]

Hi mate,

 

have a pair of YSS dual suspension dekit form my S4

 

information as follow.....

 

YSS Dual Suspension

Dekit from my S4.

Decided to change to a simple no canister rear suspension for the retro look.

Brought brand new @ $300+++

Very lightly used!!! (Brought in June)

Condition like new!!!

Fit S4, RXZ, Wave or any bike using dual suspension

Measure 34cm eyelet to eyelet

View to appericate!!!

Selling $168 cash & carry

http://www.singaporebikes.com/forums/attachment.php?attachmentid=256212&d=1347021989&thumb=1http://www.singaporebikes.com/forums/attachment.php?attachmentid=256213&d=1347021987&thumb=1

[ducktale83]

Anyone here know hw to install alarm?

 

Sent from my IPHONE6 using Tapatalk 2

[eddie_ash]

Anyone have a good condition side stand fir version s for sale plus springs?

[Pericoon]

Looking for Version S, Rpm meter, anyone selling or scraping their bike?

[STRYKER]

Anyone here know hw to install alarm?

 

Sent from my IPHONE6 using Tapatalk 2

 

Y dun ask shop to install???$20-$30 bucks only rather then having someone install it unprofessionally and cause ur wiring harness to burn???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

[stwb1981]

Y dun ask shop to install???$20-$30 bucks only rather then having someone install it unprofessionally and cause ur wiring harness to burn???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

 

Agreed!!!

 

Try Republic Motor, I usually let them service my bike & install alarms always... (i keep changing bikes that y...lol)

[ducktale83]

Y dun ask shop to install???$20-$30 bucks only rather then having someone install it unprofessionally and cause ur wiring harness to burn???

 

 

}STRYKER{ sent this post via iPhone using Tapatalk

 

Haha..already install it myself..but didnt install the auto start..scare later burn my bike..lol

 

Sent from my IPHONE6 using Tapatalk 2

[fi_east]

Anyone can recommend me cheap and good shop to replace clutch plates??

[confusehaha]

Anyone can recommend me cheap and good shop to replace clutch plates??

Yeow motor @ Amk ave 10 industrial park 1. Look for mechanic Ah Hua.

Estimated price of $100 to $110 with gasket and 6 clutch plates.

If you planning to DIY it will be much more cheaper.

[n2bird]

Hi Ah Pek,

 

just got my S4 VS , the FC look low 209km and pump for 11.39 liters.

do you think any reason why so low , exhaust use GRP .

 

thank you

[Ah Pek]

Anyone can recommend me cheap and good shop to replace clutch plates??

 

Cheap and good?..I rather look for good experience mech. Some mototiam overhead rental is higher than others and paying better salary for better experience and quality work hand. Go for reputable advertiser here like Unique or Planet..etc. Can only tell u that each plate cost about $11 per piece (6 ppcs needed) and workmanship is abbout $80 the very most. Last but not least..just REMEMBER that the EO needed not be drained out..same when u do magnetic alternator coil.

[Ah Pek]

Hi Ah Pek,

 

just got my S4 VS , the FC look low 209km and pump for 11.39 liters.

do you think any reason why so low , exhaust use GRP .

 

thank you

 

Ur full tank is 18 litres...reserve is 3 litres..u should be using 15 litres not 11.39 litres...so?..git? If u are reading from ur fuel gauge which likely the needle shows "E"..don't worry about it..it just a guide. Since non Vtec bike like ur Version S has a fuel kock that can switch over to reserve mode..use it..that's, right till the bike jerks and than switch over..that's ur real time when u hit reserve.

[shahrul_azmil3]

Do take note, some pb1 has small tank capacity.

 

My uncle pb1 is one of them. It has only 15l tank capacity.

 

Took him 10 years plus to notice it as we often overlook how many litters we pump. Usually we will look at the $$$ sign.

 

Xp

 

 

 

 

 

 

Azmil rempit

[ProFatSir]

I'm holding on a 1993 make, 1995 register pb1.

I manage to fill 18.5L into the tank.

I believe all NC31 are 18L spec.

sent from my Ericsson GH388.

[Jehuty]

Hi Ah Pek,

 

just got my S4 VS , the FC look low 209km and pump for 11.39 liters.

do you think any reason why so low , exhaust use GRP .

 

thank you

 

I assume its just the end can, anyway Version S powerful enuf without a 4 by 1, your FC shouldn't be affected that much.

[Pericoon]

Ah Pek,

 

Can I check, just now on my way back I heard metal rubbing sound whenever I throttle in. The sound is getting more. Initial I though it's my brake but when I clutch in and let it free flow, there no metal rubbing sound. Hope my description is clear. Pls advise is it my clutch having problem or what's my bike problem? Thanks in advance.

[Sprint74]

Sorry to hijack thread. Anyone wana sell their pb1?

Contact me at 96397195. Thx

[Ah Pek]

Do take note, some pb1 has small tank capacity.

 

My uncle pb1 is one of them. It has only 15l tank capacity.

 

Took him 10 years plus to notice it as we often overlook how many litters we pump. Usually we will look at the $$$ sign.

 

Xp

 

 

 

 

 

 

 

 

Azmil rempit

 

???....u shuld be looking at the litres figures not $$$ sign. Never heard of a 15 litre tank since the last 16 years and that's how old my S4 is.

[Ah Pek]

Ah Pek,

 

Can I check, just now on my way back I heard metal rubbing sound whenever I throttle in. The sound is getting more. Initial I though it's my brake but when I clutch in and let it free flow, there no metal rubbing sound. Hope my description is clear. Pls advise is it my clutch having problem or what's my bike problem? Thanks in advance.

 

Could be ur clutch housing going bad..expensive stuff. Could oo be ur clutch cable stretch or bad biting point adjustment..shouldn't be too tight..meaning some slack play at the clutch lever end.

[Pericoon]

Could be ur clutch housing going bad..expensive stuff. Could oo be ur clutch cable stretch or bad biting point adjustment..shouldn't be too tight..meaning some slack play at the clutch lever end.

 

Ok will try check and adjust the clutch cable and clutch lever end later. Hope can solve the problem. Thanks Ah Pek!