SBF Silverwings Cafe 2008 - JDM/Euro 400/600

[hilfiger]

Hi all,

 

Recently i was trying to adjust my idling speed but instead adjusted the wrong screw! There are 3 screws under seat; 2 screws with single thread located below the idling screw which is cross thread. i adjusted the one with single thread at bottom left of idling screw. Now my consumption drops to 18-19km/litre!

 

Can some kind souls do me a favour? Can u check the position of the single thread of the screw that is located at the bottom left of idling screw and let me know...

 

Hope i don't confuse anyone with my explanation...or if u have other suggestions let me know too...thanks...

[HelmetBOX1605198525]

Hi all,

 

Recently i was trying to adjust my idling speed but instead adjusted the wrong screw! There are 3 screws under seat; 2 screws with single thread located below the idling screw which is cross thread. i adjusted the one with single thread at bottom left of idling screw. Now my consumption drops to 18-19km/litre!

 

Can some kind souls do me a favour? Can u check the position of the single thread of the screw that is located at the bottom left of idling screw and let me know...

 

Hope i don't confuse anyone with my explanation...or if u have other suggestions let me know too...thanks...

 

you can take alook at the onwer manuel.

it does show how to adjust the idling speed.

where do you stay if you take in the west. i don't mind taking a look for you..

[hilfiger]

you can take alook at the onwer manuel.

it does show how to adjust the idling speed.

where do you stay if you take in the west. i don't mind taking a look for you..

 

I now know which is the idling screw to adjust..but the other screw i mentioned above has been changed from factory setting..so that's y i asked if any swingers can check that particular screw for me and let me know, then i go and adjust mine back to original position..

 

I have attached a simple diagram to illustrate what I mean...

 

PS: Have to detach seat from holder and use torchlight to look inside.

Position of screws.doc

[spin37]

any Swinger experience the V light lighting up often ? Cos my keep lighting up after i reach speed more than 120 km/h. I jus changed the belt at 24000km mark and reset it already. now keep lighting up even though i reset it a few times already..

[HelmetBOX1605198525]

I now know which is the idling screw to adjust..but the other screw i mentioned above has been changed from factory setting..so that's y i asked if any swingers can check that particular screw for me and let me know, then i go and adjust mine back to original position..

 

I have attached a simple diagram to illustrate what I mean...

 

PS: Have to detach seat from holder and use torchlight to look inside.

 

oh for that i can't help you..

sorry about that.

[HelmetBOX1605198525]

any Swinger experience the V light lighting up often ? Cos my keep lighting up after i reach speed more than 120 km/h. I jus changed the belt at 24000km mark and reset it already. now keep lighting up even though i reset it a few times already..

 

maybe you can ask the shop will change your bike to take alook.

anyway how do you reset?

push both the buttons?

[spin37]

push both button and turn on the ignition, hold more than 5 sec till it blinks..then release

[HelmetBOX1605198525]

push both button and turn on the ignition, hold more than 5 sec till it blinks..then release

 

i see that is the correct way..

anyway any picture of your bike with arrow? maybe sharing it with us?

[spin37]

my avatar lo..thats my bike

 

lazy to upload lei..

[scoobydoo]

i adjusted the one with single thread at bottom left of idling screw. Now my consumption drops to 18-19km/litre!

if u know exactly which screw u adjusted, why not try turning it back? if can't remember exactly how much is turned, then aga aga try bit by bit. my guess is the screw could be one of those that affects fuel-air ratio... mixture becomes richer so bike becomes hungrier for petrol

[HelmetBOX1605198525]

if u know exactly which screw u adjusted, why not try turning it back? if can't remember exactly how much is turned, then aga aga try bit by bit. my guess is the screw could be one of those that affects fuel-air ratio... mixture becomes richer so bike becomes hungrier for petrol

 

but is'nt our bike FI??

i thought only carb can adjust??

[silverwing73]

hi peeps

what do you use to maintain the black black pvc dashboard and plastic parts below it? waxed my deepblue yesterday about didn't know what to do for the blackies.

any weather proof products that can keep it black and shiny without showing "tears" or "white spots" when it rains?

 

 

Me the lazy one just get the shining team here to wash, polish and wax for me every 3 months

[silverwing73]

Just wondering what you guys placed in both your scoot front compartment.

 

for me :

 

on my right, the shallow compartment contain my wallet, phone and cleaning cloth.

 

on my left, the deep compartment contain, my road tax, umbrella and one rain pant for the sudden downpour when it was just drizzling and I was wearing my top. actually. if folded properly, can store more things, I love this compartment.

[silverwing73]

Just wondering what you guys placed in both your scoot front compartment.

 

for me :

 

on my right, the shallow compartment contain my wallet, phone and cleaning cloth.

 

on my left, the deep compartment contain, my road tax, umbrella and one rain pant for the sudden downpour when it was just drizzling and I was wearing my top. actually. if folded properly, can store more things, I love this compartment.

[scoobydoo]

but is'nt our bike FI??

i thought only carb can adjust??

already said just guess guess nia mah... based on what he described

maybe that screw is somehow someway somewhere somesome "linked" to the FI, coz he say FC went up a lot after he screwed his bike...

oh! i mean using a screwdriver... whahahaha http://smileys.on-my-web.com/repository/Laughing/lol-034.gif

 

hiaz... the service manual would come in really handy now

[yogi]

ok... nw dat u ve said where u put what liao...

 

nex time i nd what i help myself ok?? .. now what is ur plate #??

 

jus kidding la...

[scoobydoo]

ya lor... i also write halfway then suddenly realise... wait pp steal my little bro's rubber raincoat then in times of emergency how... 搞出人命 jia lat liow

[silverwing73]

ya lor... i also write halfway then suddenly realise... wait pp steal my little bro's rubber raincoat then in times of emergency how... 搞出人命 jia lat liow

 

Haha, I always remove my wallet and handphone after I park my bike, don't worry, I always do a complete check before I leave my bike

 

So if they are so cheapo take my cleaning cloth and worn pant, what else can I say.

[anodise57]

my right compartment only put receipts... Left compartment..... rather unused... wasted. HAHAHAHHA

Should put more stuff to make front Heavier......

 

Time due for changing of front tyre already...... Metler Feelfree?

Accordign to the German guy @ the Booth @ BikeAsia

He say Silverwing using 14" 120/80-14 58STL ..

Wonder where have this??? I need to change the front liao!!!!!

Oh btw the rear is 13" 150/70 - 13 64STL

This is Sports touring tyre!!! woohoooo

[HelmetBOX1605198525]

my right compartment only put receipts... Left compartment..... rather unused... wasted. HAHAHAHHA

Should put more stuff to make front Heavier......

 

Time due for changing of front tyre already...... Metler Feelfree?

Accordign to the German guy @ the Booth @ BikeAsia

He say Silverwing using 14" 120/80-14 58STL ..

Wonder where have this??? I need to change the front liao!!!!!

Oh btw the rear is 13" 150/70 - 13 64STL

This is Sports touring tyre!!! woohoooo

 

STL is what brand?

how is the tires?

feelfree right now is out of stock.

JR say the stock will be in around may

120/70R14 Feelfree (Front)

[BlackChocobo]

Hey, I've installed the hazard light at the designated place already... take a look~

http://h1.ripway.com/kager82/HazardLight.jpg

Looks like a stock rather than mod huh?

[hilfiger]

if u know exactly which screw u adjusted, why not try turning it back? if can't remember exactly how much is turned, then aga aga try bit by bit. my guess is the screw could be one of those that affects fuel-air ratio... mixture becomes richer so bike becomes hungrier for petrol

 

Yes that's what i thought also that the fuel-air ratio is out of tune:( ..i tried adjusting back bit by bit and monitoring my FC but it's a slow process..since i only turned 1 screw wrongly, i hope there's a kind soul here who can peep into the idling screw area to help me out...

[bigcow]

ok... nw dat u ve said where u put what liao...

 

nex time i nd what i help myself ok?? .. now what is ur plate #??

 

jus kidding la...

 

bro, thats a lockable compartment.

[SW9000]

Yes that's what i thought also that the fuel-air ratio is out of tune:( ..i tried adjusting back bit by bit and monitoring my FC but it's a slow process..since i only turned 1 screw wrongly, i hope there's a kind soul here who can peep into the idling screw area to help me out...

 

 

Hmm... should get a mechanic to check the number of turns for fuel/air mix on the carb that is ok (i.e. 3 and 1/2 turn out or 3 and 3/4 turn, etc).

Then set the same for the one that has got problem.

I did that for my previous chopper but might not be suitable for yours.

Anyone can confirm if process is correct?

[contacted]

Just wondering what you guys placed in both your scoot front compartment.

 

for me :

 

on my right, the shallow compartment contain my wallet, phone and cleaning cloth.

 

on my left, the deep compartment contain, my road tax, umbrella and one rain pant for the sudden downpour when it was just drizzling and I was wearing my top. actually. if folded properly, can store more things, I love this compartment.

 

Right is IU Unit and squueze 1 cleaning cloth.

 

Left is parking coupon / small deck of playing cards / pen / hong bao (for ad hoc weddings)

 

x9, can i have the contacts of this 'shining team' and how much do they charge for a SW and how long do they take.