Kawasaki KRR150 Riders

[haoKR]

Bro, wat do u usually do if ur bike overflow?

 

off everything 1st(ingition,choke,engine). kik for sum tym

urs overflow ?

 

i always turn off e petrol 'switch' when iam not on my bike.

[dynehaziq]

off everything 1st(ingition,choke,engine). kik for sum tym

urs overflow ?

 

i always turn off e petrol 'switch' when iam not on my bike.

 

The bike just came back from servicing.. can kick, but den wanna move off from idling it will become "underpower" (i dunno wat words to use. Bobok, some mlys use tat word.) or it will even stall.. It stall when i want to make a rite turn at a junction. lucky no vehicle..

[wayliang]

yoyo long no come in here lol

dont sell le la.

[denial.]

hey guys, wanna ask something.

sometimes when i riding, then i stop, the rpm should go all the way down to 1.5 rpm right.. but now, it stops at 3 rpm for about 3-5 seconds then it goes back to my usual 1.5rpm. why ah? i never rev or anything..

[Kyrul]

hey guys, wanna ask something.

sometimes when i riding, then i stop, the rpm should go all the way down to 1.5 rpm right.. but now, it stops at 3 rpm for about 3-5 seconds then it goes back to my usual 1.5rpm. why ah? i never rev or anything..

 

Service ur carb

[adesmond2]

The bike just came back from servicing.. can kick, but den wanna move off from idling it will become "underpower" (i dunno wat words to use. Bobok, some mlys use tat word.) or it will even stall.. It stall when i want to make a rite turn at a junction. lucky no vehicle..

 

The bike just came back from servicing.. can kick, but den wanna move off from idling it will become "underpower" (i dunno wat words to use. Bobok, some mlys use tat word.) or it will even stall.. It stall when i want to make a rite turn at a junction. lucky no vehicle..

 

yo bro.. check your settings.. + increase your idling... =)

[denial.]

Service ur carb

 

service carb?

 

wahhh, i just sent my bike for full service at ah gua lane ramesh shop last week.

that means they never service my carb properly?

[gutripper]

hey guys, wanna ask something.

sometimes when i riding, then i stop, the rpm should go all the way down to 1.5 rpm right.. but now, it stops at 3 rpm for about 3-5 seconds then it goes back to my usual 1.5rpm. why ah? i never rev or anything..

 

I hope your choke isn't left on.

[Kyrul]

service carb?

 

wahhh, i just sent my bike for full service at ah gua lane ramesh shop last week.

that means they never service my carb properly?

 

U send to ramesh?? Thats the worst thing to do. Quite bad reputation there

[simon85]

@dynehaziq~~~~~~~ Your design same as me lol~~ but colour not same only~~

[dynehaziq]

yo bro.. check your settings.. + increase your idling... =)

 

I just found out d prob.. the shop nvr tune the carburator properly.. -.- waste of money going there..

 

@dynehaziq~~~~~~~ Your design same as me lol~~ but colour not same only~~

 

hahaha.. ya.. i planning to change the design, new wraping for the seats n mold new coverset for my bike.. basically everything.. after i went for servicing at tiz particular shop, nth seems to be working fine.. =(

[gutripper]

I just found out d prob.. the shop nvr tune the carburator properly.. -.- waste of money going there..

 

 

 

hahaha.. ya.. i planning to change the design, new wraping for the seats n mold new coverset for my bike.. basically everything.. after i went for servicing at tiz particular shop, nth seems to be working fine.. =(

 

Lol...maybe they took out all your original parts and put in their local ones....

[Willis]

sometimes idiling drop slow could be because of tuning not properly done as well. Previous i had the same problem as u den i well to tune den ok alr , timing set too high

[Eno]

Tomorrow if anyone going planet motors between 9am-3pm please say hi to me if u see me. Will be there to do some servicing.

[Willis]

i am boreddd anyone online wanna go rounding ?

[adesmond2]

i am boreddd anyone online wanna go rounding ?

 

oh ya.. it's you who commented on my fb.. i was still wondering who is that.. haha!!

[Motor Factor]

sometimes idiling drop slow could be because of tuning not properly done as well. Previous i had the same problem as u den i well to tune den ok alr , timing set too high

yup...correct is the air jet that went wrong....

[Willis]

Yes DES!haha but no address feel like washing my bike ( yes air intake high equal higher timing equal more time to go back idling rpm

[adesmond2]

Yes DES!haha but no address feel like washing my bike ( yes air intake high equal higher timing equal more time to go back idling rpm

 

lolx.. icic.. okok.. next time.. =)

you have my number right? sms me directly..

[Eno]

Yay overhauled bike liao. Been suffering with 200km per full tank on a old, scratched block. Hopefully can get back my 280-300km per tank.

 

Running I'm sucks though. This is my first time in my life I running in a bike.

[adesmond2]

Yay overhauled bike liao. Been suffering with 200km per full tank on a old, scratched block. Hopefully can get back my 280-300km per tank.

 

Running I'm sucks though. This is my first time in my life I running in a bike.

 

lolx.. top overhaul only right? change block only? got remove gears and check?

[SparkEnzo]

Hi guys, talking bout idling, i notice that when my bike's headlight is on, idling and sound of bike drops but when turn off the headlight, bike like got more power, rpm when headlight on is around 1.5 but when headlight is off, rpm goes up to about 2...And also, i could hear some cling cling cling sound around the engine area but dunnoe whats that, sounds something very loose or already drop and bouncing around inside, what could it be ? And just to share, I have to kick start my bike more than 10 times early in the morning almost everyday without trying to use the help of choke, quite worrying !!! Any of you got same experience?

[Kyrul]

Hi guys, talking bout idling, i notice that when my bike's headlight is on, idling and sound of bike drops but when turn off the headlight, bike like got more power, rpm when headlight on is around 1.5 but when headlight is off, rpm goes up to about 2...And also, i could hear some cling cling cling sound around the engine area but dunnoe whats that, sounds something very loose or already drop and bouncing around inside, what could it be ? And just to share, I have to kick start my bike more than 10 times early in the morning almost everyday without trying to use the help of choke, quite worrying !!! Any of you got same experience?

 

The rpm thing is normal... U on light it will drop abit.

 

The sound could be frm the pipe, if not its ur clutch gear alrdy worn out

 

As for the bike difficult to strt, do a full service n a proper setting so bike can strt easily

[Eno]

lolx.. top overhaul only right? change block only? got remove gears and check?

 

Yup. Change block,block head,piston,ring,pin,bearing..

 

Didn't do bottom overhaul. Later in june might do.

[Eno]

Hi guys, talking bout idling, i notice that when my bike's headlight is on, idling and sound of bike drops but when turn off the headlight, bike like got more power, rpm when headlight on is around 1.5 but when headlight is off, rpm goes up to about 2...And also, i could hear some cling cling cling sound around the engine area but dunnoe whats that, sounds something very loose or already drop and bouncing around inside, what could it be ? And just to share, I have to kick start my bike more than 10 times early in the morning almost everyday without trying to use the help of choke, quite worrying !!! Any of you got same experience?

 

Problem 1 is explained by kyrul.

 

Problem 2 and 3 can be solved when you full service your bike. The mechanic will take out your block and check the inside. For now, we can only speculate what thing is loose. It could be con rod, it could be piston ring. Just be sure to service at a reputable bike shop so u won't get chopped.