Kawasaki KRR150 Riders

[SparkEnzo]

To add on...whr can get nice integrated rear light which fits nicely? Mine which is already on the bike since i bought it is broken on the sides...Think the rearlight is being cut to fit in, doesn't look nice and my bike's fairing doesn't fit in nicely, got some gap in between the joints, cacat abit...ahaha...got recommendations anyone?

[Jundeang]

lol wait i heard about this surge of power and acceleration thingy, is it like very obvious or what? my bike v hard to go to rpm 7. i compare w my bf's bike, at the same speed his rpm much higher than mine. gee. and the sound, i think i can tell a slight diff.

 

try mine? =x

[adesmond2]

Huh? Sure or not. Never heard before. Wjere the valve come from?. Kr valve open fully at 11k have uh.

 

Careful with jettings... Most mechs reduce the main n air jet amount. This can result in premature heat build up n even jam.

Standard kr main jet is 280, air not too sure but i think its 27.5. Reducing will make ur bike rev higher but wear n tear will be faster.

 

ya.. i understand.. dun worry.. mine is 270 and air jet is higher.. lolx.. thanks..

 

Wah, really got another valve open at 11rpm? didnt know that but I really wudn't dare doing it man...rpm at 9 i scared ready, haha ! Anyway, does main jet and air setting plays a part in starting our bike? Sorry if its noob Qs to you guys...haha...

 

hmmm.. i would say, everything does?

anyway, wait till you are in comfort zone with your kr before playing all these..

 

To add on...whr can get nice integrated rear light which fits nicely? Mine which is already on the bike since i bought it is broken on the sides...Think the rearlight is being cut to fit in, doesn't look nice and my bike's fairing doesn't fit in nicely, got some gap in between the joints, cacat abit...ahaha...got recommendations anyone?

 

actually quite alot.. just go any jb shop and do..

 

try mine? =x

 

haha.. your bike start already diff lor.. lolx..

[Jundeang]

start? mine stock stock normal normal.. where got different.. just sproc abit bigger only.. >.

[Kyrul]

what if make it higher?

 

Oh... So standard is 270, 22.5. K now i know the exact ones.. Haha.

 

Make it higher is ok as long its not lowered.

[weiliang]

what about mine? is 240.. need to make it higher?

[Kyrul]

what about mine? is 240.. need to make it higher?

 

Yup, find mech who do setting by using as close to stock settings

[.CandyZam.]

if difficult to start means air or patrol jet need to adjust?

[blueacidic]

hi des. stock CDI can reach 13k RPM?

 

doesnt necessarily means your bike can rev till 13RPM which means it is fast, that's what i learn from my mech tho. setting wise is very important. There must be sufficient air going in, not too much/little etc.

[Manfred003]

try mine? =x

 

can i try try plz

[Kyrul]

if difficult to start means air or patrol jet need to adjust?

 

Shuld be... My bike i laid up since nov den just strt to warm up ystrdy. 3 kick + choke n it strts normally. Just that my batt weak.

 

doesnt necessarily means your bike can rev till 13RPM which means it is fast, that's what i learn from my mech tho. setting wise is very important. There must be sufficient air going in, not too much/little etc.

 

Yup true its how u set, but if u want betta try using original krr CDI that's made in japan.

[Jundeang]

can i try try plz

 

can! we try see who push bike faster ok? xD

[adesmond2]

doesnt necessarily means your bike can rev till 13RPM which means it is fast, that's what i learn from my mech tho. setting wise is very important. There must be sufficient air going in, not too much/little etc.

 

lol.. the pro has spoken..

yup yup.. the setting.. the air jet.. even 1mm turn makes a diff of a jerky pick up.. or a smooth pick up..

[Willis]

des! thank you very much for helping me !!

[simon85]

Shuld be... My bike i laid up since nov den just strt to warm up ystrdy. 3 kick + choke n it strts normally. Just that my batt weak.

 

 

 

 

 

Yup true its how u set, but if u want betta try using original krr CDI that's made in japan.

 

why batt weak? i not sure issit recharge automatically~~ and orginal krr CDI made in japan how much?

[Tequila]

KR parts for trade... before monday 21/3/11.. hurry!

 

http://www.singaporebikes.com/forums/showthread.php/317900-All-KR-parts-for-trade%28pushing-bike-to-shop-soon%29

[Kyrul]

why batt weak? i not sure issit recharge automatically~~ and orginal krr CDI made in japan how much?

 

6 mnths never strt den summore my wiring i do direct frm batt. Means if bike never strt for a long time it will get weak. N weak batt = weak bike.

 

 

That cdi is never for sale. Must find 2nd hand ones frm ppl. Originally came with 1st batch of krr, those will silver coloured frame in 1999 before s'pore implemented powercut for all vehicles. Even if u get frm ppl expect price to be arnd 150-300 (rare item)

[adesmond2]

des! thank you very much for helping me !!

 

lolx.. no worries.. cya later if you going planet... =)

[adesmond2]

des! thank you very much for helping me !!

 

lolx.. no worries.. cya later if you going planet... =)

[artpark]

hi guys i selling my bike for 800dollar any takers can call or pm me , 91708670

[haoKR]

Did u know that there is another valve which will open at rmp 11 ?

Juz for your info

 

wa..rpm11 sia..

 

wun de lah.. lolx.. unless you tell that person where you stay and etc.. lolx..

 

 

 

yup yup..

that's the most noticeable.. Must try if you have KR.. heehee.. at least once per life time.. you wun forget that feeling..

 

u tried b4?

haha

 

haha. thats why i say scrap. overhaul how much alr. plus not all ppl appreciate. plus if i say i overhaul the other party might not believe. thats why scrap better.

selling $400? must be desperate alr. or either bike chui. tia the bike and sell also worth more lor.

 

ya la..scrap lo

think i sell(if any1 wan),or i scrap liao,on sep

 

siao uh infeeeenieeetyyyy! try 2nd link lor safest haahaa!

 

cfm ?

haha

 

ohhh... den bo bian liaoz..

 

 

 

got. gear 2 can reach RPM 13.. but you must be able to slow down and stop in time.. remember that place i bring you all go quite sometime ago?

No car / no traffic light..

 

where.lol

 

hi guys i selling my bike for 800dollar any takers can call or pm me , 91708670

 

y wan sell? haha

[artpark]

wa..rpm11 sia..

 

 

 

u tried b4?

haha

 

 

 

ya la..scrap lo

think i sell(if any1 wan),or i scrap liao,on sep

 

 

 

cfm ?

haha

 

 

 

where.lol

 

 

 

y wan sell? haha

oh well i have a bigger toys lo haha

[Manfred003]

oh well i have a bigger toys lo haha

 

Ups for fast bike

[wayliang]

oh well i have a bigger toys lo haha

 

likes. haha, ups for your sales.

[blueacidic]

lol.. the pro has spoken..

yup yup.. the setting.. the air jet.. even 1mm turn makes a diff of a jerky pick up.. or a smooth pick up..

 

no lah just sharing what i know only.. you then pro!