Kawasaki KRR150 Riders

[haoKR]

yeow motor paintwork

[yakuza]

Ok. Will check out all the places mentioned. Thanks guys.

[jwylong]

Bro.. can post here instead?

 

 

 

haha.. jeff.. wan to ask you also.. alot of mech say fairing for "swee" nia.. if without fairring, the "aerodynamic" will be gone, isn't it?

 

 

then beside the head light got two hole these hole.

First the hole is to bring the air out of the machine from the side ... it balance the machine calling it the "Aerdynamic" you try take out out the Fairing and run fast see what will happen ...

second after the hole it lead the "air" to the back radiator so that you engine can gain more horse power, alot time bike cnnot start is because of air intake to high or low ... that the reason why we need to tune bike ...

[jwylong]

Dear pilots. I have organised a short riding on 17/08/2012 Starting from

 

meet up point ECP Carl's Jr. (Formally was BIG SPLASH) @10:00PM to Arab Street (Meeting the oldies bikes)

 

Arab street @ 10:45pm to Loyang Ave (sight seeing along singapore of the longest road)

 

Loyang Ave @ 11:30 to Defu lane 10 (A bike shop) For DIY as the bike shop willing impart basic skill of servicing of bike. The bike shop is operating till late night.

 

Planning to stay @ Loyang Ave for chit-chat till comfortable timing, then proceed to Bike shop another chit-chat. simple bike servicing

 

* Upon reach Arab street we have have a MECH from the bike shop with us.

 

meet up timing is 09:45 pm briefing at 10:15 pm and ready to move lastest 10:25pm

Edited August 31, 2012 by jwylong

[vemonstorm]

Guys... Izzit true tt if we wanna change our stock tail to sharp tail must take out the 2T pump and relocate the batt and cooler place??

[yakuza]

Still looking for the pillion seat cowl. Urgently needed. Do PM me. Thanks..

[SparkerS1]

Selling these items:

 

http://i1248.photobucket.com/albums/hh497/sparkers1/Sales%20Items/IMG_0877.jpg

http://i1248.photobucket.com/albums/hh497/sparkers1/Sales%20Items/IMG_0876.jpg

http://i1248.photobucket.com/albums/hh497/sparkers1/Sales%20Items/IMG_0875.jpg

1 pair both KR150 pillon/rider seats, PM for quotation.

 

http://i1248.photobucket.com/albums/hh497/sparkers1/Sales%20Items/IMG_0878.jpg

1 brand new KR150 side stand, PM for quotation.

 

http://i1248.photobucket.com/albums/hh497/sparkers1/Sales%20Items/IMG_0879.jpg

1 pair H4 12v 100/90w white bulb 4700k @ $8.

 

Serious buyers pls PM me

 

Viewing/dealing @ hougang/Sengkang, no obligations.

 

Not for fussy buyers.

 

Non-constructive comments unwanted.

[Chicano535]

WTS: Kawasaki KRR 150 Misc Stuff

Edited September 2, 2012 by Chicano535

[vemonstorm]

Wanna sell moulded tail and hugger. Color is black. Please give me ur offer and whatsapp me at 97990977 for pic too.

[wantongkol07]

looking for standard krr bubble.. sms me 97648095 -wan

[wodepigu]

 

any1 noe whr i cn find e fairing bolt and nut which i circle in e pic.

 

i wen to afew bike shop dey say dun haf those kind.

[haoKR]

did u try ah boy or regina ?

[wodepigu]

did u try ah boy or regina ?

 

i tried ah boy. dey oso dun haf. whr is regina?

[krrRSA]

Hey all! long time since i was on here!

Still got my kips, shes leaking alot of oil and some petrol but i stil ride alot and love her 2 bits, heres a picture of my girlfriend posing on it

 

[krrRSA]

Heres another picture of my baby on a cliff near the sea

People here in south africa love this bike i get asked about it alot and every1 says its beautiful, went to a bike club and they all crowded around it, feels good

[SparkerS1]

People here in south africa love this bike i get asked about it alot and every1 says its beautiful, went to a bike club and they all crowded around it, feels good

 

Yea, KR is a gd bike. Enjoy ur ride and ride safe

[cheo0047]

Hi fellow krr riders, I need some advice on the value of my krr. Only have 0.5 year left on COE. Manufactured in 2003. Any estimates on how much I can sell it? Really appreciate any advice =)

[RainKR]

Hi fellow krr riders, I need some advice on the value of my krr. Only have 0.5 year left on COE. Manufactured in 2003. Any estimates on how much I can sell it? Really appreciate any advice =)

 

Me also... i dun think there's value for our bike... registered 2002 COE ending December 2012. No one want to buy i rather scrap and keep the parts then sell to shop....

Edited August 26, 2012 by RainKR

[artpark]

hmmmmmmmmmmmm

[krrRSA]

Hey all i need some help, my bikes a town bike, never hits the highway, gets ridden hard a few times a week, but never above 80 kph and never above 10k rpm, and lately its been leaking black stuff out the exhaust, just a lil drop every now and then.

 

so i havent been on the highway in a few months and today i did 40km on the highway, 120kph-130kph at 8k revs, when i got home the bike looked like this : all of that came out of the exhaust canister and leaked down, my wheels and swingarm where covered in oil.

 

this bike hasnt been ridden 2 hard or been above 80kph for months so it myt be carbon burning out the exhaust..

 

any1 know what this is from?

 

[yakuza]

Hey all i need some help, my bikes a town bike, never hits the highway, gets ridden hard a few times a week, but never above 80 kph and never above 10k rpm, and lately its been leaking black stuff out the exhaust, just a lil drop every now and then.

 

so i havent been on the highway in a few months and today i did 40km on the highway, 120kph-130kph at 8k revs, when i got home the bike looked like this : [ATTACH=CONFIG]255331[/ATTACH] all of that came out of the exhaust canister and leaked down, my wheels and swingarm where covered in oil.

 

this bike hasnt been ridden 2 hard or been above 80kph for months so it myt be carbon burning out the exhaust..

 

any1 know what this is from?

 

[ATTACH=CONFIG]255332[/ATTACH]

 

My guess, lots of carbon trapped inside or maybe your 2T didn't burn totally. Not too sure. Wait till the rest say what they think it is. Cause i ever experience this before too. So once in a while i blast my bike hard. And every seems fine now.

[adesmond2]

Hey all i need some help, my bikes a town bike, never hits the highway, gets ridden hard a few times a week, but never above 80 kph and never above 10k rpm, and lately its been leaking black stuff out the exhaust, just a lil drop every now and then.

 

so i havent been on the highway in a few months and today i did 40km on the highway, 120kph-130kph at 8k revs, when i got home the bike looked like this : [ATTACH=CONFIG]255331[/ATTACH] all of that came out of the exhaust canister and leaked down, my wheels and swingarm where covered in oil.

 

this bike hasnt been ridden 2 hard or been above 80kph for months so it myt be carbon burning out the exhaust..

 

any1 know what this is from?

 

[ATTACH=CONFIG]255332[/ATTACH]

 

My guess, lots of carbon trapped inside or maybe your 2T didn't burn totally. Not too sure. Wait till the rest say what they think it is. Cause i ever experience this before too. So once in a while i blast my bike hard. And every seems fine now.

 

Yakuzza is correct, when carbon got trapped inside the exhaust and since you hardly drag above rpm 7 as you are riding mostly below 80kph, the carbon got trapped.

 

*rest assured it will not do any harm to your bike except dirtying your floor.

 

to resolve it, fine tune it and ride it hard once a week at least.. maintain 8000RPM for a certain length of route let's say 10~20km..

[bruce71]

Me also... i dun think there's value for our bike... registered 2002 COE ending December 2012. No one want to buy i rather scrap and keep the parts then sell to shop....

 

I completely disagree. Many singaporeans are "brainwashed" into the idea that 10 years is old for a bike or car! On my trips to just nearby Johor, I see many bikes or cars that are 15 / 20 / 25 years old and still being used daily ! Stupid COE system !

 

Think, will there be another CBR / R / GSX-R etc etc newer, better bike than the present 4-stroke versions we have now in 10 years time? Probably yes, right? Eg. A new CBR150 has replaced the older version , a FZ-16 has replaced FZ-150i.

 

But will there be a 2-stroke replacement for our KRR, SP, RXZ, TZ, 125Z, etc? Probably not! Eg. SP which are more than 10 years old are still in demand more than a 8-yr old CBR150? You need 2A for the 4-stroke 250 ninja, which leaves out most beginners who will understandly prefer CB-400 or class-2 when they got those licenses. However, many will find them costly to maintain, which is no issue if you are financially successful, however not all of us can afford it.

 

I have fellow "uncle" friends that regret scrapping their old RXZ for new CBF / YBR / Tiger / Twister. ( no offense to those owners, sorry! ). Many of those less financially successful find CB-400 / class 2 unaffordable or not logical budget wise if you are using it to do dispatch.

Edited August 27, 2012 by bruce71

[shahmir92]

I realise that there is black oil leak at the stomach of my bike..the stomach part that is connected to the block..it will only leak if i were to ride the bike..but if the bike is off..there will be no leaking..but also the leaking is on off..sometime if i were to ride my bike there will be no leaking..sometime it will leak..its just abit of leaking u can see like after riding like one drop of black oil come out from there..can anyone help?

[jwylong]

Me also... i dun think there's value for our bike... registered 2002 COE ending December 2012. No one want to buy i rather scrap and keep the parts then sell to shop....

yup .. the value is looking at 200 only ...as the COE value is only 10 plus ? unless you renew COE then you bike value goes up ..