Kawasaki KRR150 Riders

[adesmond2]

12 minutes ago, MoToRpSyChO11 said:

I'm due for inspection in September,  idk what I'm gonna do!!! Somebody save me!

Think maybe sell off, hahaha

dun worry.. this year still safe.. I went about Jan.. heard it's next year.. we shall see lor..

[MoToRpSyChO11]

8 minutes ago, adesmond2 said:

dun worry.. this year still safe.. I went about Jan.. heard it's next year.. we shall see lor..

Thx man! After my inspection, I'll update on the outcome

[adesmond2]

13 minutes ago, MoToRpSyChO11 said:

Thx man! After my inspection, I'll update on the outcome

can pass one la.. dun worry.. sept.. that means you should have already receive the e-letter.. haha.. as long your bike is the same as last year.. should be ok..  i think they will cross reference with photos from last year..

When i went this year.. they only check engine and body number.. high/low beam light, can brake, signal/brake lights, exhaust fail but they ignore..  pass.. haha.. 

[SkyVersace]

Check again guys

 

https://www.channelnewsasia.com/news/singapore/tighter-emission-standards-older-motorcycles-noise-limits-nea-14574010

[adesmond2]

48 minutes ago, SkyVersace said:

Check again guys

 

https://www.channelnewsasia.com/news/singapore/tighter-emission-standards-older-motorcycles-noise-limits-nea-14574010

ahhhh . 2023.. so you are safe until 2023..

[MoToRpSyChO11]

My coe ends December 2023, maybe sell off right before Hahaha

[MoToRpSyChO11]

1 hour ago, SkyVersace said:

Check again guys

 

https://www.channelnewsasia.com/news/singapore/tighter-emission-standards-older-motorcycles-noise-limits-nea-14574010

Did you guys see the noise limit also?! Sianzzz! No point buying aftermarket exhaust already lor! 

I bought a drz  before I bought the krr. It was cheap considering the balance coe of 8 years, got it at 7k with delta 4 barrel exhaust. But sold it after a week of riding, minor problems which made me very disappointed with the bike!

Edited June 10, 2021 by MoToRpSyChO11
Typo

[MoToRpSyChO11]

where can I buy mikuni 34mm carb? Roughly how much will it be?

Edited June 10, 2021 by MoToRpSyChO11
Add more

[adesmond2]

1 hour ago, MoToRpSyChO11 said:

where can I buy mikuni 34mm carb? Roughly how much will it be?

quite hard to find original.. might need to go in those dealer stores in Singapore and buy from them.. online 75% fake.. 10% not accurate or workable. 15% see luck.. hahaha..

[SkyVersace]

Might have lobang for this. Preorder also. Roughly 2 - 3 weeks. Original. Mikuni tm models

[MoToRpSyChO11]

4 hours ago, SkyVersace said:

Might have lobang for this. Preorder also. Roughly 2 - 3 weeks. Original. Mikuni tm models

I just found one carousell. It's a mikuni tm 34mm for 150. Now gotta find the manifold. Maybe check ah boy when time permits. Any other places you guys know to find that?

[ladkrr]

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

[MoToRpSyChO11]

25 minutes ago, ladkrr said:

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

Hi, hope you're okay. I have been going to HKL since I got my licence. They are expensive and wouldn't say they pro in krr. I still go there because I trust the mechanic. But JB is open already, too long I didn't go there, so I can't recommend any shop in a particular .  Wait a while, there are many pros here. Maybe they can guide you.

Get well soon, brother!

[ladkrr]

11 hours ago, ladkrr said:

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

Also i might need a place or person that i can order indon coverset from

[SkyVersace]

17 minutes ago, ladkrr said:

Also i might need a place or person that i can order indon coverset from

Hi friend. Sorry, i no longer bring in coversets. Its a troublesome thing. Alot of things can go wrong. Things like waiting time and prices aalways turn potential customers away

 

Also, i suggest even if you find a 2nd hand indon coverset, dont take it. The inspection centre might fail you. 

12 hours ago, ladkrr said:

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

Also, dm me on ig yea. 

 

Sky.versace

Edited April 3, 2022 by SkyVersace

[ladkrr]

5 minutes ago, SkyVersace said:

Hi friend. Sorry, i no longer bring in coversets. Its a troublesome thing. Alot of things can go wrong. Things like waiting time and prices aalways turn potential customers away

 

Also, i suggest even if you find a 2nd hand indon coverset, dont take it. The inspection centre might fail you. 

Also, dm me on ig yea. 

 

Sky.versace

Hi Sky, i have already requested to follow u on ig. Thanks.

[SkyVersace]

Just now, ladkrr said:

Hi Sky, i have already requested to follow u on ig. Thanks.

Yep got it

2 minutes ago, ladkrr said:

Hi Sky, i have already requested to follow u on ig. Thanks.

Not sure why. Cant seem to dm you or any1 of my friends on ig

[adesmond2]

18 hours ago, ladkrr said:

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

Planet motors at ubi.. but call them before heading down 67474740.. heard that they dun do 2 strokes anymore.. cuz cannot find original parts..

BUT.. Malaysia has alot of parts..

17 hours ago, MoToRpSyChO11 said:

Hi, hope you're okay. I have been going to HKL since I got my licence. They are expensive and wouldn't say they pro in krr. I still go there because I trust the mechanic. But JB is open already, too long I didn't go there, so I can't recommend any shop in a particular .  Wait a while, there are many pros here. Maybe they can guide you.

Get well soon, brother!

JB - Kok Seng motor - confirm will do Swee Swee for you.. haha.. just say introduced by Black KR with box (big size guy).. I just WhatsApp them yesterday for my MT03 dyno only.. hahaha...

The rest of the shops I dun recommended.. Got one bike shop forget to put in bearing cover on my kr previously.. got another one forget to put some screws.. =.=... Kok Seng I sit there and observed several times.. all Swee Swee.. no mistakes.. even if got mistakes.. once they saw that additional one screw or etc, they will remove everything and check throughly.. the rest of the shops will throw away that additional spare part.. so dun anyhow go... 

6 hours ago, SkyVersace said:

Hi friend. Sorry, i no longer bring in coversets. Its a troublesome thing. Alot of things can go wrong. Things like waiting time and prices aalways turn potential customers away

 

Also, i suggest even if you find a 2nd hand indon coverset, dont take it. The inspection centre might fail you. 

Also, dm me on ig yea. 

 

Sky.versace

indeed.. coversets will fail inspection if it's too much differences.. they will say cuz it adjusted the "position" and etc will cause accidents more easily...

[ladkrr]

Hi, thank you for recommending that shop in JB but I'm afraid my bike is not in a great position to even ride haha.

Do you think Kok Seng carries indon fairing? 

Been asking around and got a few quotations already in SG. Would rather head down to JB to bring it back myself to Singapore.

[MoToRpSyChO11]

4 minutes ago, ladkrr said:

Hi, thank you for recommending that shop in JB but I'm afraid my bike is not in a great position to even ride haha.

Do you think Kok Seng carries indon fairing? 

Been asking around and got a few quotations already in SG. Would rather head down to JB to bring it back myself to Singapore.

Did you check shopee?

[adesmond2]

14 hours ago, ladkrr said:

Hi, thank you for recommending that shop in JB but I'm afraid my bike is not in a great position to even ride haha.

Do you think Kok Seng carries indon fairing? 

Been asking around and got a few quotations already in SG. Would rather head down to JB to bring it back myself to Singapore.

Fairing - I need to WhatsApp him (boss) /her (lady boss) to check... if your bike cannot ride.. repair it to a condition that can at least ride la..

 

14 hours ago, MoToRpSyChO11 said:

Did you check shopee?

I've checked, only stock fairing..

[MoToRpSyChO11]

Where is the shop exactly? The kok seng workshop in jb?

[adesmond2]

11 hours ago, MoToRpSyChO11 said:

Where is the shop exactly? The kok seng workshop in jb?

yes bro... I've post on your Facebook post as well...  

they did mentioned they included all parts including installation for you..

 

colour left is white/green

[MoToRpSyChO11]

On 4/3/2022 at 1:42 PM, ladkrr said:

Hi, everyone.

i am sure that all of u are expert in kr, i recently met into an accident & require a trustable shop. 
 

can u pls recommend me some that u might have patron before... as i am afraid to put my bike in the hands of any shop

 

 

Someone selling https://www.carousell.sg/p/krr-coverset-1154847423/?t-id=29527123_1649950573416&t-referrer_browse_type=categories&t-referrer_category_id=1592&t-referrer_filter_condition=USED&t-referrer_request_id=uf5KwOATrUibrXHA&t-referrer_sort_by=&t-tap_index=535

[AhHong888]

Hi all, anyone know any shop that do polishing and chrome parts? like engine and pipe all until swee swee