Kawasaki KRR150 Riders

[FREDDY]

Originally posted by d0n^@Oct 26 2004, 06:36 PM

haha

removing the bubble screen is equally ma fan for me

some of the nuts that are held on by the rubber came off liaoz....

 

 

help u buy u dont use~

no lah that day i remove jus use the long right spanner

no need to remove anithing at all

 

 

 

sorry lah not i dun wan to use

now i prefer black color inside of white becoz my bike black

[d0n]

Originally posted by |FREDDY|@Oct 26 2004, 08:15 PM

no lah that day i remove jus use the long right spanner

no need to remove anithing at all

 

 

 

sorry lah not i dun wan to use

now i prefer black color inside of white becoz my bike black

 

then do a white vs black one + superwhite bulbs in the background?

 

anyway my bubble screen the fittingholes doesnt really match well w/ the holes on my saitao...so muz squeeze here squeeze there abit then can fit in one

[d0n]

Originally posted by calebO@Oct 26 2004, 06:57 PM

wah. long long time no see liao hor.. wanan come also tonite? i going with josepg.. that vfr rider..

wah vfr?

i will feel inferior one lehz

[ravenSP]

seriously, is anyone interested in going jb tmr (wed)? i very very long never go le.. just got passport done.. someone bring me around tmr? onz leh?

[d0n]

Originally posted by filbert@Oct 26 2004, 08:33 PM

seriously, is anyone interested in going jb tmr (wed)? i very very long never go le.. just got passport done.. someone bring me around tmr? onz leh?

u jio celebo lor

i dont mind going in tmr if tdy not going in

[ravenSP]

Originally posted by d0n^@Oct 26 2004, 08:39 PM

u jio celebo lor

i dont mind going in tmr if tdy not going in

he got ur number? you either pm me your number or i ask him call you lor

 

around what time you all wana go in?

 

aiyah.. today just pump full tank haha.. nm go in for fun also can! hehehe

[DM]

did your belly rust through or a crack was scraped open by high speed hump. smoke doesn't leave the chamber so observe carefully. what color was the liquid ? clear or black ? black could be excess 2t + carbon. clear = i have no idea (water?) hmm....

[d0n]

Originally posted by filbert@Oct 26 2004, 08:43 PM

he got ur number? you either pm me your number or i ask him call you lor

 

around what time you all wana go in?

 

aiyah.. today just pump full tank haha.. nm go in for fun also can! hehehe

yup

he have my number

think should be going in tonight

he told me 10+pm juz now

havent confirm exact timing yet

 

anyone else interested?

[Guest FireSpitter]

Originally posted by d0n^@Oct 26 2004, 08:17 PM

wah vfr?

i will feel inferior one lehz

Wah... You've got a serious case of inferiority complex!! Going out with a VFR also, you feel down?! (Hint: Don't stand beside me & pee in the urinals when we go toilet together!)

[A3roSmith]

Originally posted by FireSpitter@Oct 26 2004, 11:18 PM

Wah... You've got a serious case of inferiority complex!! Going out with a VFR also, you feel down?! (Hint: Don't stand beside me & pee in the urinals when we go toilet together!)

scully vfr800....

[Guest FireSpitter]

So what? Do you mean going out with a VFR800 or even a Busa or ZX12 means that they'll reach their destination earlier than you? Unless we are not in Sillypore where speeds are limited to a pathetic "maximum" of 90km/h. More likely chances are the big bikes will act as big brothers and help look after the smaller bikes in the group during riding.

[d0n]

Originally posted by FireSpitter@Oct 27 2004, 12:55 AM

So what? Do you mean going out with a VFR800 or even a Busa or ZX12 means that they'll reach their destination earlier than you? Unless we are not in Sillypore where speeds are limited to a pathetic "maximum" of 90km/h. More likely chances are the big bikes will act as big brothers and help look after the smaller bikes in the group during riding.

hm

no lar

personally feel more threatened by big bikes

very hard to follow their taillight + always eat their smoke

[tom3694]

Originally posted by d0n^@Oct 26 2004, 12:07 PM

interested in white VS babyblue one or not?

i tinking of re-doing my speedo

maybe we swop lor + u top me some $$?

but will only do swopping in dec when my hols are here

top up $$ no problem

 

but i hor quite curious how the process got time we do together leh

[tom3694]

Originally posted by alexesben@Oct 26 2004, 07:31 AM

I've done my chain and spocket le... the chain look so thin.. seem to break anytime but nvm la, endure for awhile till i go and change again..

 

Now is my tyre, HKL run out of stock for BT0039 so i thinking of waiting first..

brudder dont worry as long size428 chain is lubed and slack tightened often easily use up to 6 months

 

last time my rxz, tzr kia anyhow lut and tompang also never break where got use what O-ring or X-ring

 

read it in one those web sites by private enthusiatic the crucial pt is lbs per inch in strength of chain ( heavy-duty is as strong as O-ring if not stronger ) numbers about 7000 lbs if not wrong

[tom3694]

Originally posted by alexesben@Oct 26 2004, 07:53 AM

Nothing much to earn so they dun want to waste effort wat.. who dun... But it is not for everyshop la, some still do small or big business. Jus be patience and wait loh..

JB bo bian too many shop and too cheap that sporean also went over, so business have to treasure it, so they do all.... lolx But still not all the shop in JB are good and worthwhile too..

brudder i dont mind waitin but they tell it to your face i dont want to do leh

 

what meat u want bone u leave it for others hah

 

well i can always take my business else where lor

[RedHare]

Hey guys...

My bike sometime very hard to engage to higher gear. Some time also very hard to engage to lower gears too. Sometime when this two problem occurs the bike engine just die off. Wat actually happened? Izzit my engine oil need to change or somethings is work with my clutch plate???

[tom3694]

Originally posted by d0n^@Oct 26 2004, 12:10 PM

hm...how abt TT900GP?

also not bad marhz...

got front and back tyres for kips ornot

 

size = ??

 

price = ??

[tom3694]

Originally posted by |FREDDY|@Oct 26 2004, 04:08 PM

bring out speedo no need to remove sai tao at all

can dont remove lah but beri hard to screw up the speedo and rpm cables pek chek hand diffucult to go in

[tom3694]

Originally posted by |FREDDY|@Oct 26 2004, 04:11 PM

i got a speedo and fuel gauge faceplate for sale

white back ground

wording in red

 

anione keen?

brudder i want all 3 leh speedo rpm and temp gauge in white wording in red ok lah but hor dont know how to fix leh

 

how much ??

[tom3694]

Originally posted by sKyVodKa@Oct 27 2004, 02:57 AM

Hey guys...

My bike sometime very hard to engage to higher gear. Some time also very hard to engage to lower gears too. Sometime when this two problem occurs the bike engine just die off. Wat actually happened? Izzit my engine oil need to change or somethings is work with my clutch plate???

try adjusting your free-play of your clutch cable if not clutch plates need to change

 

use a jack to lift up your rear wheel engage 1st gear while depressing fully on clutch lever rear should not spin if clutch plates are still good

[RedHare]

Originally posted by tom3694@Oct 27 2004, 03:13 AM

try adjusting your free-play of your clutch cable if not clutch plates need to change

 

use a jack to lift up your rear wheel engage 1st gear while depressing fully on clutch lever rear should not spin if clutch plates are still good

Thanks !!! Hope nothing serious happened to my bike.

[cArRotZ]

Originally posted by sKyVodKa@Oct 27 2004, 03:18 AM

Thanks !!! Hope nothing serious happened to my bike.

try changing engine oil. mine works this way.

[Metalfyre]

I can remove my entire speedo panel without removing anything else at all...

 

and for those who want to put blue bulb, don't bother. You look at my bike you'll know the result...the light seems greenish one...those faint greenish hue that normally ghost will appear in that colour -_-

and you sometimes can't see the display coz of the lousy lighting.

 

If gear hard to engage your engine oil needs replacing.

[Metalfyre]

Originally posted by calebO@Oct 26 2004, 05:39 PM

hmm i went over 2 big humps recently without slowing down coz i can't see the hump.. dark dark without yellow lines.. tyre not puncture. anything would be affected nort hAr?

invisible humps?

 

those gradual ones or very steep ones..

 

i think go over at high speed once or twice still ok

 

but last time i did it on a regular basis my bike now in the motor diam changing steering cone

[Metalfyre]

Originally posted by |FREDDY|@Oct 26 2004, 04:11 PM

i got a speedo and fuel gauge faceplate for sale

white back ground

wording in red

 

anione keen?

looks like the original..

 

the fuel gauge also white background with red words???