[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[lauhs8]

Ah Pek, heard alot from u. May i know what i should do when my mileage LED seem to be blacken.Cannot see the reading.

 

Can SMS Ur location to me 98318243.

 

Thanks.

[lauhs8]

Ah Pek, heard alot from u. May i know what i should do when my mileage LED seem to be blacken.Cannot see the reading.

 

Can SMS Ur location to me 98318243.

 

Thanks.

 

Mine is Vtech 1.

[lfc131]

AhPek, how much does Ah fook charge for Fork Servicing?

[limkim]

hi all,

 

I am changing my tyres, check on the tyres thread and looks like everyone is recommending M5.

 

Just wondering what tyres are you guy using now?

 

Any recommendation? I personnally favour Angel.

 

I seldom corner, I looking for long last one.

[pyro13]

hi all,

 

I am changing my tyres, check on the tyres thread and looks like everyone is recommending M5.

 

Just wondering what tyres are you guy using now?

 

Any recommendation? I personnally favour Angel.

 

I seldom corner, I looking for long last one.

 

Long lasting?? Heard the pirelli diablo strada has very good mileage

[pyro13]

Mine is Vtech 1.

 

U can go cmo thread and look for tachnicolor.. He does repair.. Alternatively, bikewerkz can do it too i tink..

[pyro13]

Hi all, would like to wish all S4 riders a Happy Chinese New Year!

 

Guys, i have some problem regarding my PB1. Recently after i have ride my bike hard and stop at petrol station to buy some stuff but when i try to start, it wont start. All lights and horns are working fine but it just wont start. So i switch off and wait a few mins, to my surprise it work and my bike start. This happen 2 times already. Some1 at work told my its the batt but i just wana make sure its dat and nothing else b4 i change the batt. Do any PB1 or S4 riders out there have the same problem as me? Thanks in advance....Cheers

 

Hmm also do anybody knows where to get the ON/OFF switch on the handlebar coz mine is already crack (old already lah)? Or where to get the whole set (left & right)? Tx again....

 

Maybe, wen it happens again.. Try hiting the on off switch or twisting it.. Should be able to start.. Mine at times also the same problem. But twisting it arnd and it will be ok

[lfc131]

hi all,

 

I am changing my tyres, check on the tyres thread and looks like everyone is recommending M5.

 

Just wondering what tyres are you guy using now?

 

Any recommendation? I personnally favour Angel.

 

I seldom corner, I looking for long last one.

 

Dunlop Arrowmax.. Long Lasting..

[Nike]

hey guy... i was just wandering, if i have changed a new batt, retifier and also magneto coil however there is not charging of batt whereby the retifier is working. what could be the problem?

[pyro13]

hey guy... i was just wandering, if i have changed a new batt, retifier and also magneto coil however there is not charging of batt whereby the retifier is working. what could be the problem?

 

Whoa!! Could be ur wiring??

[Ah Pek]

Ah Pek, heard alot from u. May i know what i should do when my mileage LED seem to be blacken.Cannot see the reading.

 

Can SMS Ur location to me 98318243.

 

Thanks.

 

Just get two T10 LED to replace the two bigger incandeence bulbs in the meter will do. 90670020

[Ah Pek]

hi all,

 

I am changing my tyres, check on the tyres thread and looks like everyone is recommending M5.

 

Just wondering what tyres are you guy using now?

 

Any recommendation? I personnally favour Angel.

 

I seldom corner, I looking for long last one.

 

If urs is a non-Vtec..go for ArrowMax GT105 (Frnt 110 Bck 140)..cheap and good.

[Ah Pek]

AhPek, how much does Ah fook charge for Fork Servicing?

 

Change of Oil seal etc with oil..$90. No oil leak and seal ok..he will advise u just to replace the oil..anyway..aske dhim to refill at least 145cc per fork..mine is 150cc..shiok_shiok!

[desewer]

If urs is a non-Vtec..go for ArrowMax GT105 (Frnt 110 Bck 140)..cheap and good.

 

Bro ah pek... is it gt105 or gt501? I need to chg tyres badly. My rear tyre got geometrical shape! Lol! The centre is worn flat and the sides are sharp. My tyre size is also incorrect. Prev owner installed size 150...

 

Do u know if i can get arrowmax at small mah (jeffrey/ahyu) and what is the next best value tyre u would recommend bro? I was thinking of getting bridgestones before i saw ur reply above. My bike non vtec and used for "cari makan" only.. moderate to heavy riding on e-ways.

 

Am currently on pirellis but only because they were quite new n were fitted when i bought the bike last year jan 2010.

 

Sent from my GT-I9000 using Tapatalk

[Ah Pek]

Bro ah pek... is it gt105 or gt501? I need to chg tyres badly. My rear tyre got geometrical shape! Lol! The centre is worn flat and the sides are sharp. My tyre size is also incorrect. Prev owner installed size 150...

 

Do u know if i can get arrowmax at small mah (jeffrey/ahyu) and what is the next best value tyre u would recommend bro? I was thinking of getting bridgestones before i saw ur reply above. My bike non vtec and used for "cari makan" only.. moderate to heavy riding on e-ways.

 

Am currently on pirellis but only because they were quite new n were fitted when i bought the bike last year jan 2010.

 

Sent from my GT-I9000 using Tapatalk

 

Sorry..it could be GT501..always get mix up. Can go to Ah Fook and install or just about anywhere else. It should cost around $190-$210 for both front and back. This was the original tyres set and tested in Honda R&D circuit to be the best for our ride before S4 was on the market. Bridgestne may be another very close option but try and stick to Japanese. Continental tyres are mostly tested for bigger bikes like 600cc and above..not meant for our smaller S4. Stick to what comes original the Japs recomend if you can..this is Asia and the tarmac (differ from four seasons country) that forms our road matters..so are the rubbers that makes the tyre. This is just my take on it.

 

Myself till date is still using Arrowmax though I have tried others. Yes...never use 150 on the back or at all 120 in front..been there!

[limkim]

Hi Ah Pek,

 

Need your help again.

 

This few weeks, i noticed that my bike (Vtec3) is giving some knocking some, sound like from the engine. it is especially loud if i am at high gear and slow speed without trottling. (when slowing down).

 

Anyone has similar encounter?

[lfc131]

Change of Oil seal etc with oil..$90. No oil leak and seal ok..he will advise u just to replace the oil..anyway..aske dhim to refill at least 145cc per fork..mine is 150cc..shiok_shiok!

 

Ah Fook is at AMK industrial Park 2 right?

My first time going Liao..(",)

[Ah Pek]

Hi Ah Pek,

 

Need your help again.

 

This few weeks, i noticed that my bike (Vtec3) is giving some knocking some, sound like from the engine. it is especially loud if i am at high gear and slow speed without trottling. (when slowing down).

 

Anyone has similar encounter?

 

Can't tell by ur description leh..must hear myself. Normally when one say "knocking" sound in engine..its pre-detonation..due to low "RONS" number like low grade petrol like grade 95 unleaded..insufficient Octane for higher compress ehgine..ur case me be timing chain..wharever.

[Ah Pek]

Ah Fook is at AMK industrial Park 2 right?

My first time going Liao..(",)

 

AMK Ave 3, Blk 5032 #295 AMK Industrial Prk 2. Mention my name otherwise kenna "Ang Pow" I dunno!

[ducktale83]

anyone know how much isit to change block gasket?my block oil leak already..sianz..

[kano]

AMK Ave 3, Blk 5032 #295 AMK Industrial Prk 2. Mention my name otherwise kenna "Ang Pow" I dunno!

 

How Ah Pek you got valve cleaner? Going to Melaka this saturday...

 

kekekeke

[Nike]

Whoa!! Could be ur wiring??

 

yea that what the mechanics said, need to do whole wiring...*sigh*

[Ah Pek]

anyone know how much isit to change block gasket?my block oil leak already..sianz..

 

$100+ but less than $150.

[Ah Pek]

How Ah Pek you got valve cleaner? Going to Melaka this saturday...

 

kekekeke

 

 

Call me tomorrow...see if I can get some.

[desewer]

bro ahpek tks for the eo change. solid lah my bike now! i ride home at ecp from dover to changi, keep on playing between gears 1 and 3 only!!! redline also no problem! damn shiok... by the way i settled for BT45's 110/140 yesterday...

Edited February 10, 2011 by desewer