[General] Post Your Bike Pictures Here.

[revhappy]

  CSV said:

@revhappy, where you get the piece of metal behind the headlights? i want also! can fit 1st gen phantom?

 

I guess devil.L has answered your question. It came with the bike, when I bought it. Not sure if it can be fitted for your version. But I can take some close up snaps and post if you want. Then you can check if it fits.

[naim]

DIY rattlecan spray.. with advice from bro jevan.. thanks for the advice! used Nippon Pylox and the paint seems pretty tough, but will be careful with petrol spills...

 

[sparklight]

  naim said:

DIY rattlecan spray.. with advice from bro jevan.. thanks for the advice! used Nippon Pylox and the paint seems pretty tough, but will be careful with petrol spills...

 

[ATTACH=CONFIG]219734[/ATTACH] [ATTACH=CONFIG]219735[/ATTACH] [ATTACH=CONFIG]219736[/ATTACH]

 

Naim,

 

If you worry about Petrol spills, then use clear lacquer spray after your spray works is completed. It will resist the petrol. Done that and tested.

[jevan]

Yeah. Nippon has a clear spray that you can use as well. And I second that it will resist the petrol.

[naim]

Ok noted! Thanks guys!

 

Sent from my HTC Desire S using Tapatalk

[jbern]

  naim said:

DIY rattlecan spray.. with advice from bro jevan.. thanks for the advice! used Nippon Pylox and the paint seems pretty tough, but will be careful with petrol spills...

 

[ATTACH=CONFIG]219734[/ATTACH] [ATTACH=CONFIG]219735[/ATTACH] [ATTACH=CONFIG]219736[/ATTACH]

That's one sexy looking phantom man!

[kzone]

guys, any shop u recommend to respray bike that will do thorough cleaning prior to the spraying? Like dismantling everything, clean & spray everything including frame, chrome covers, rim... derusting also

[naim]

  jbern said:

That's one sexy looking phantom man!

 

thanks bro! alot of blood sweat n tears over the past week alone at the carpark every nyt... hahaha! but worth it!

[naim]

  jbern said:

That's one sexy looking phantom man!

 

thanks bro! alot of blood sweat n tears over the past week alone at the carpark every nyt... hahaha! but worth it!

[CSV]

i've been in this forum for quite some time, then i realise i never put up pictures of my phantom also. what a disgrace!

 

i shall let my pictures do the talking.

 

 

move the signal indicators up abit so that it looks different from other phantoms.

 

DIY spray the forks black. alu foil wrapped exhaust (ugly but makes the bike sound so good)

 

and what else.....hmm, crash bar. that's bout it.

[jevan]

your header wrap looks okay what. why you say ugly. nice bike kept in good condition

[willtam]

  CSV said:

i've been in this forum for quite some time, then i realise i never put up pictures of my phantom also. what a disgrace!

 

i shall let my pictures do the talking.

 

[ATTACH=CONFIG]222871[/ATTACH][ATTACH=CONFIG]222872[/ATTACH][ATTACH=CONFIG]222873[/ATTACH][ATTACH=CONFIG]222874[/ATTACH][ATTACH=CONFIG]222875[/ATTACH][ATTACH=CONFIG]222876[/ATTACH]

 

move the signal indicators up abit so that it looks different from other phantoms.

 

DIY spray the forks black. alu foil wrapped exhaust (ugly but makes the bike sound so good)

 

and what else.....hmm, crash bar. that's bout it.

 

Hi Bro where and how much did you buy your Crash Bar ? BTW anyone WTS Brash_bar for Phantom ?

[Bphomet]

I'm looking crash bar also. How many crash bar type for phantom? I heard wide, anchor, small.

Which 1 is nicer?

[CSV]

  willtam said:

Hi Bro where and how much did you buy your Crash Bar ? BTW anyone WTS Brash_bar for Phantom ?

 

ah koon. 61 lengkok bahru. 85 bucks.

[weian]

nice bike! very well maintained!

 

can i ask what is the alu wrap for? sound only? just curious..

 

and is it true that ah koon's crash bar don't rust?

i bought one from ah boy last time, rust like mad.

i parked at open carpark without cover, maybe that's why.

 

do share! thanks!

[CSV]

alu wrap helps keeps the engine bay cooler by making the exhaust gases hotter. hotter exhaust faster heat dissipation. your exhaust wrap does the same thing as well but mine cost like 5 bucks.

 

and it makes the exhaust sound deeper.

 

ah koon crash bar rust also. but I keep mine always covered. starting to rust abit in the area where the metal is welded.

[weian]

I see i see. Thanks for the insight!

[willtam]

ah koon crash bar rust also. but I keep mine always covered. starting to rust abit in the area where the metal is welded.

 

Anyone can advise where and who sell quality Crash Bar that is less likely to rust - better Chrome work ?

[CSV]

seng kwang!

 

expensive but good quality.

[armani123sg]

  willtam said:

ah koon crash bar rust also. but I keep mine always covered. starting to rust abit in the area where the metal is welded.

 

Anyone can advise where and who sell quality Crash Bar that is less likely to rust - better Chrome work ?

 

just keep polishing n it will be fine. my fre's crashbar more than 3 years old, no rust. i think from ah boy. only deep scratches will rust, but even that can just polish/clean off with turtle wax brand chrome polish.

[weiqiang]

  naim said:

DIY rattlecan spray.. with advice from bro jevan.. thanks for the advice! used Nippon Pylox and the paint seems pretty tough, but will be careful with petrol spills...

 

[ATTACH=CONFIG]219734[/ATTACH] [ATTACH=CONFIG]219735[/ATTACH] [ATTACH=CONFIG]219736[/ATTACH]

 

saw ur bike on forum after spraying. do u have a photo of a side view of your bike. where you mount your side panniers? how much? I wanna find a mounting position that is very close to the top box. most of the bikes i saw, their top box are abit far away from the panniers. I tried to pm but mailbox full

[naim]

  weiqiang said:

saw ur bike on forum after spraying. do u have a photo of a side view of your bike. where you mount your side panniers? how much? I wanna find a mounting position that is very close to the top box. most of the bikes i saw, their top box are abit far away from the panniers. I tried to pm but mailbox full

 

will get a pic for u wen im free... but i got my set off a friend 2nd hand.. i tink brand new is at least $180... i installed DIY wif d brackets dat came wif d sideboxes. its all abt trial n error lar. cux if u alr hv d givi rack, u can mount d clamps on it i tink. but i using those no brand kind..

[weiqiang]

  naim said:

will get a pic for u wen im free... but i got my set off a friend 2nd hand.. i tink brand new is at least $180... i installed DIY wif d brackets dat came wif d sideboxes. its all abt trial n error lar. cux if u alr hv d givi rack, u can mount d clamps on it i tink. but i using those no brand kind..

 

thanks take your time. i m still thinking whether to put side panniers. quite unwilling to sacrifice the convenience of squeezing thru traffic easily

[speedwing]

My Honda rebel...

 

http://i120.photobucket.com/albums/o171/usat_boy/dfbe5ea5.jpg

[cherryE10]

  X-ilED said:

This phantom is hitting the streets tongiht... hahah..

 

A mini RIOT creation

http://farm3.static.flickr.com/2422/3729043557_0e459751e2.jpg?v=0

 

 

on a side note.. this is a phantom i had just finished modding.. u can see more pics in the cruiser section. thread name "RIOT's Den". Hope you guys will enjoy the pics.

 

i want that rear fender!