[Archived - 2009] PK Official- Questions for Newbie

[jianping]

yea i checked with my friends already, it's the balancer.. thanks..

[econbizer]

Anyone here changes EO at ah boy's workshop?

 

What is the usual price + labour?

I went there today to change, along with footpegs. Only charged $4 for labour n $9 for 1l of EO. The mechs were not so busy n were v nice. Got live karaoke in the workshop. upp man.

 

Btw to answer my own post earlier,

 

@LAB

- Cost of a complete set of Front foot pegs is at $40+ per side.

- Cost of just the rubber (per side) = $5

- Cost of the metal base plate (per side) = $11

- Cost of eagle foot rest (if u buy more, if not up to 30) = $25

[KnightDragon]

Anyone here changes EO at ah boy's workshop?

 

What is the usual price + labour?

I went there today to change, along with footpegs. Only charged $4 for labour n $9 for 1l of EO. The mechs were not so busy n were v nice. Got live karaoke in the workshop. upp man.

........

 

1 EO enought for your bike meh???

1 need almost 2 bottle

how many liter?

[BlackDawn]

1 EO enought for your bike meh???

1 need almost 2 bottle. how many liter?

Phantoms only need 1 liter of EO

[jianping]

Hi, my handle bar lock seems faulty.. can't lock my handle bar to the left when parking le.. haiz..

Anyone know repair/replace the lock will cost how much?

[queirtus]

bike lock go planet ah,cheap cheap

[jianping]

around how much would it be?

[kzone]

bros, my phantom is leaking engine oil. There are oil stains at the screws of the engine.. Used to be very very little, barely noticeable.. but seems to be slightly more now cos I just wash bike over the weekend & already notice it today.

 

I asked ah koon some time back n he said its due the rubber sealing wear & tear and cant do anything abt it. Is that right? Or can it be fixed?

[jB]

which rubber seal? gasket? bring to planet for 2nd(and better) opinion

[jB]

around how much would it be?

maybe 20-30+? check the price at planet motors if they have 2nd hand

[Zhi Ming]

Just a quick question, i was oiling my chain today and notice its quite tight, not much slack...and its not as "movable" as my bicycle chain...is this normal or a sign of something wrong with the chain? please help with the noob question thanks

[kzone]

which rubber seal? gasket? bring to planet for 2nd(and better) opinion

 

Errrr... where is the Gasket? I can see oil here on the right side,

http://i88.photobucket.com/albums/k193/kzzone/Ngine.jpg

 

& here on the left side

http://i88.photobucket.com/albums/k193/kzzone/NgineL.jpg

[lunloon]

Errrr... where is the Gasket? I can see oil here on the right side,

http://i88.photobucket.com/albums/k193/kzzone/Ngine.jpg

 

& here on the left side

http://i88.photobucket.com/albums/k193/kzzone/NgineL.jpg

 

how much oil you notice normally?

[mepkoh]

Just a quick question, i was oiling my chain today and notice its quite tight, not much slack...and its not as "movable" as my bicycle chain...is this normal or a sign of something wrong with the chain? please help with the noob question thanks

 

chain slack is needed..about an inch or so... please check your manual for rec slack (some bikes have it on the chain guard)...this is to accomodate the swing arm motion..if there is little/insufficient slack the chain may snap..

the effect of a tight chain is lost of power and accelerated wear on the chain/sprockets...

get it corrected asap...

[kzone]

how much oil you notice normally?

 

Those parts become greasy abt 1 week after last wash.. there's no noticeable oil drippings at the place I park though.. & I start to see drop in EO level after abt slightly less then 1000km of riding

[snailexpress]

Errrr... where is the Gasket? I can see oil here on the right side,

http://i88.photobucket.com/albums/k193/kzzone/Ngine.jpg

 

& here on the left side

http://i88.photobucket.com/albums/k193/kzzone/NgineL.jpg

 

Kzone have you had the cam chain tensioner replaced by your photos it looks like its coming out from the starter motor.

They have to take the starter motor off when they do the job and if not put back properly you get the symptoms you are describing .

The oil will seep out of the seal and slowly make its way to the places you highlighted in the photos

[kzone]

Kzone have you had the cam chain tensioner replaced by your photos it looks like its coming out from the starter motor.

They have to take the starter motor off when they do the job and if not put back properly you get the symptoms you are describing .

The oil will seep out of the seal and slowly make its way to the places you highlighted in the photos

 

Not sure if the previous owner did but I didnt. But I did had the piston replaced though... about 6 mths back. So its prob due to poor workmanship? Planet can solve this as well?

 

Never been to planet as its not as convenient for me compared to Redhill but will find time to do so if its really cos of workmanship problems with Redhill.

[queirtus]

try planet,won't regret one!

[econbizer]

Hey all,

 

Any workshop & website to recommend ta200 mod ideas?

Like raised tank, resprayed custom art?

[madman]

Not sure if the previous owner did but I didnt. But I did had the piston replaced though... about 6 mths back. So its prob due to poor workmanship? Planet can solve this as well?

 

Never been to planet as its not as convenient for me compared to Redhill but will find time to do so if its really cos of workmanship problems with Redhill.

 

I say go get a 2nd opinion.

 

Hey all,

 

Any workshop & website to recommend ta200 mod ideas?

Like raised tank, resprayed custom art?

 

hmm... airbrush there are plenty in SG doing it. it depends on ur budget, cos it aint cheap.

[jB]

try planet,won't regret one!

its like opposite saying of " go to or@nge shop, sure regret one!"

 

no offence meant

[SNapEl]

Hi all, I passed erp gantry w/o fully pushing the bloody cashcard last night... is it here https://onepay.onemotoring.com.sg/onepay/index.aspx that i go pay the fine?

[gysmily]

Hi all, I passed erp gantry w/o fully pushing the bloody cashcard last night... is it here https://onepay.onemotoring.com.sg/onepay/index.aspx that i go pay the fine?

 

Wah..thanks for the tip. About the payment , think it'll be 24 hours later then they'll up date at payment booth.

Relax....let your money earn interest a bit more in the bank

[SNapEl]

Har tip? lol i asking if it is that url where I can see the fine and pay it. AXS machine also can right? lol sian man... bloody erp

[thenation]

AXS machines can be used to pay fines, speaking from experience haha.