Kawasaki KRR150 Riders

[sUuQre]

http://img.tapatalk.com/daba0c0a-d331-1dd8.jpg

 

hehe thanks bro duo, long time no see. )

[sUuQre]

i think if ah cheong is better than most of us here. lol.

 

 

just get a decent one will do. save money. not likely you will be able to fully utilize it anyway.

i know of ppl using semi syn oil. their kr still surviving well.

i think my replies arn't helpful since i dont have the habit of spoonfeeding

 

well you could use semi-synthetic, no harm, well in the end we're 2 strokers, we dont really rely on EO that much compared to a 4 stroker.

BUT! i would like to remind you that, KRR gearbox have the tendency to have a greater wear and tear compared to the SP or other 2 strokers alike,

i have changed some of my gears in the gearbox, due to the fact that it was worn out badly, and it doesnt come cheap.

[duo]

hehe thanks bro duo, long time no see. )

Very long. Got involved in an accident I did not even know about. Nice to know you are on a 2stroke now. Its the most fun.Maybe I could teach you abit of what I know next time for I rode this bike for 3years. Do be careful of NEA though. Hope I recover soon as before.

[dela]

hey guys.i need to double confirm some things. when i do a full service, what do i need to take note of,

or tell the mech particularly. like wash valve and tuning and carb.

what else do i need to take note of..

thanks in advance guys..

[banks]

Haloo all lao jiaos.. Anybody selling their KR fairings?? Just the 2 side pieces & center piece thats holding the 2 side pieces together.. Pm thks..

[wayliang]

well you could use semi-synthetic, no harm, well in the end we're 2 strokers, we dont really rely on EO that much compared to a 4 stroker.

BUT! i would like to remind you that, KRR gearbox have the tendency to have a greater wear and tear compared to the SP or other 2 strokers alike,

i have changed some of my gears in the gearbox, due to the fact that it was worn out badly, and it doesnt come cheap.

 

thanks for the info

then how can protect my gearbox / clutch plates etc. since EO doesn't play a big part.

[bugsy_]

Hey guys looking for rear break pump.

[kawa150]

Hi guys letting go my krr rim gold colour wif batax tire still in good conditon letting go at $50... Can contact me at 85102893 or pm me

[faazul]

Rare KR R6 tail with intergrated signals for sale...

contact 94454013

[faazul]

Rare KR R6 tail with intergrated signals for sale...

contact 94454013

[rrTam]

hello guys,im from malaysia,i would like to buy krr zx150 coverset(any singapore colour),anyone can help me,i realy2 need your help,hopefully u all can help me,im newbies,u also can add me thru Facebook https://www.facebook.com/#!/profile.php?id=100001728756382

tq

[sUuQre]

hey guys.i need to double confirm some things. when i do a full service, what do i need to take note of,

or tell the mech particularly. like wash valve and tuning and carb.

what else do i need to take note of..

thanks in advance guys..

 

full service, in my honest opinion, clean top head, block, wash carb.

thats all, normally mech will inform u IF there's any defects to your block or top head or piston.

be wary of shops which will CHOP off your head, do know about ur bike,

find a shop which u really trust, thats all...

 

And oh yah, tuning of carb is a diff part of the story. No use tuning when bike is on stock condition,

cos if STOCK condition, just use the stock jettings and settings.

[sUuQre]

Very long. Got involved in an accident I did not even know about. Nice to know you are on a 2stroke now. Its the most fun.Maybe I could teach you abit of what I know next time for I rode this bike for 3years. Do be careful of NEA though. Hope I recover soon as before.

 

you got into an Accident? oh my... hope u will recover real fast bro! ill add u at FB! hehehe

[sUuQre]

thanks for the info

then how can protect my gearbox / clutch plates etc. since EO doesn't play a big part.

 

ok i think u got me wrong MAYBE, why i say EO doesnt play a big part cause im comparing the usage of EO of 2 strokes with 4 strokes,

why i say that because, 4 stroke needs a regular change of EO compared to 2 stroke.

just use a decent EO would be enuf, for me MOTUL TRANSOIL. try it, for what i feel, its just right for 2 stroke engines,

not too "heavy" compared to other EO which actually cater for 4stroke bikes.

[duo]

you got into an Accident? oh my... hope u will recover real fast bro! ill add u at FB! hehehe

I was also surprised when I found out I got into an accident. Sure be waiting for your friend request. Thanks for the well wishes. Just remember me in your prayers bro.

 

 

 

 

 

 

 

ok i think u got me wrong MAYBE, why i say EO doesnt play a big part cause im comparing the usage of EO of 2 strokes with 4 strokes,

why i say that because, 4 stroke needs a regular change of EO compared to 2 stroke.

just use a decent EO would be enuf, for me MOTUL TRANSOIL. try it, for what i feel, its just right for 2 stroke engines,

not too "heavy" compared to other EO which actually cater for 4stroke bikes.

http://img.tapatalk.com/daba0c0a-f2b7-8de6.jpg

[Zerio]

hi guys, anyone ever encounter revving to much throttle and the power of the bike doesn't response well. Could it be the clutch plate due to wear and tear? Usually when I released the clutch right after I changed the gear, I could feel the bike response once I throttle in. But now it responded much slower and it takes few seconds to build up and reaches its biting point. Please advise:(

[kawa150]

hi guy looking for a cheap krr150 coe going to end oso can... contact me at 85102893

[tik]

Can other bike join you guys for outing?

 

Rain u change bike liao ah?

[adesmond2]

hi guys, anyone ever encounter revving to much throttle and the power of the bike doesn't response well. Could it be the clutch plate due to wear and tear? Usually when I released the clutch right after I changed the gear, I could feel the bike response once I throttle in. But now it responded much slower and it takes few seconds to build up and reaches its biting point. Please advise:(

 

as you mentioned, yup.. "mostly" if the clutch plates BUT also possible it's your gears.. Check it with your fav mech or bike shop.. bear in mind, if they claim to be clutch plates, once change, immediate diff.. if they claim to be gears, you have to overhaul.. so check carefully before determine..

[adesmond2]

outing cancelled...

thanks and have a great day..

Edited May 3, 2012 by adesmond2

[dela]

Hey guys. I notice that my krr kind of abit not straight from behind. Like the rearguard and tyre is not straight. Like off abit. Very obvious leh. And when i ride fast, can feel the whole tail like awinging around especially if my wife bhind leh. Been looking around for new body frame. Cant seem to find any. Pls help guys. Look ard at yishun ind also dun have. Thanks guys.

[adesmond2]

Hey guys. I notice that my krr kind of abit not straight from behind. Like the rearguard and tyre is not straight. Like off abit. Very obvious leh. And when i ride fast, can feel the whole tail like awinging around especially if my wife bhind leh. Been looking around for new body frame. Cant seem to find any. Pls help guys. Look ard at yishun ind also dun have. Thanks guys.

 

ask your BIKER friends to sit on your bike and you see it from behind.. Gf/wife "might" not be rider or doesn't ride sport bikes thus you might see abit "not straight".. Bring to bike shop to confirm it and change to a 2nd hand if your favorite bike shop have..

 

*body fame cannot be change.. because our LTA has engraved the number on it.. you can only purchase a brand new body frame, import and update LTA = TONS of hassle..

*2nd hand body fame? Bike has to scrap with body fame and engine..

 

*correct me if i'm wrong, thanks..

[haoKR]

Hey guys. I notice that my krr kind of abit not straight from behind. Like the rearguard and tyre is not straight. Like off abit. Very obvious leh. And when i ride fast, can feel the whole tail like awinging around especially if my wife bhind leh. Been looking around for new body frame. Cant seem to find any. Pls help guys. Look ard at yishun ind also dun have. Thanks guys.

 

rim bend issit ?

most change swing arm

[faazul]

Rare KR R6 tail with intergrated signals for sale...

pillion seat removable

cover included

contact 94454013

1st come 1st served

 

[dela]

ask your BIKER friends to sit on your bike and you see it from behind.. Gf/wife "might" not be rider or doesn't ride sport bikes thus you might see abit "not straight".. Bring to bike shop to confirm it and change to a 2nd hand if your favorite bike shop have..

 

*body fame cannot be change.. because our LTA has engraved the number on it.. you can only purchase a brand new body frame, import and update LTA = TONS of hassle..

*2nd hand body fame? Bike has to scrap with body fame and engine..

 

*correct me if i'm wrong, thanks..

 

Seriously. Where cn i find 2nd hand body frame. I didnt know LTA kept track of frame.