Kawasaki KRR150 Riders

[Jundeang]

yo uncle alvin!! nope i only see 8678.. =x

when wan bring me go loyang bai bai? my wrist bone broken need to go bai ping an lei..

[haoKR]

Hey guys I looking for KR150 Head Fairing. Please contact me at 96751500... or PM me.!

 

sum1 selling at garage sales

[adesmond2]

yeah i know you are only allowed red at the back, white at the front and amber at the sides if i remember correctly..

but il have it on remote so i can just turn it off[ATTACH=CONFIG]227303[/ATTACH]

look how sexy this bike looks...i want that

 

a question for everyone though, my bike in 1st has 0 power above 7000rpm, is this normal?

the rest of the gears are fine

 

O.O any lao jiaos can clarify one the "you are only allowed red at the back, white at the front and amber at the sides if i remember correctly.." part ?

I tot it was so long as led light not on speedo and on other parts of body = illegal? wa got new law ah? haha....confuse siol.

 

garrickchoww i am in South Africa not sure about your laws,

i think the reasoning is because your headlights are white, so white at the front, brakes are red, so you are allowed red at the back,amber on the side because of indicators, it is illegal to have under lights.

i will have to look up the laws

 

haha... that's what I wanted to ask.. I tot you are in South Africa.. thus rules and regulations will be different..

Anyway, for your case, you would need to check up on your end about the laws..

1st gear above 7k rpm will have extra power.. If you run in finish, you can run hitting 13k 1st gear.. BUT.. hitting 13k. don't "HOLD" it there unless you want your piston to jam.. hahaha..

 

Garrick - Under SG laws, no additional lights except, Brake light, front lights, signal lights N speedo lights.. (NOT on bike nor the floor)

 

 

did u saw 8787....!

 

u tio ar! swee~

 

yo uncle alvin!! nope i only see 8678.. =x

when wan bring me go loyang bai bai? my wrist bone broken need to go bai ping an lei..

 

lolx.. meow's paw still can pull clutch ar? haha.. better recover faster by resting more lah...

*take cab there to bai bai or get your friends to pillion you there..

[alvin8787]

yo uncle alvin!! nope i only see 8678.. =x

when wan bring me go loyang bai bai? my wrist bone broken need to go bai ping an lei..

 

see here...http://www.singaporepools.com.sg/en/lottery/4d_result.html

pretty pretty never run water!!

[alvin8787]

yo uncle alvin!! nope i only see 8678.. =x

when wan bring me go loyang bai bai? my wrist bone broken need to go bai ping an lei..

 

haha... that's what I wanted to ask.. I tot you are in South Africa.. thus rules and regulations will be different..

Anyway, for your case, you would need to check up on your end about the laws..

1st gear above 7k rpm will have extra power.. If you run in finish, you can run hitting 13k 1st gear.. BUT.. hitting 13k. don't "HOLD" it there unless you want your piston to jam.. hahaha..

 

Garrick - Under SG laws, no additional lights except, Brake light, front lights, signal lights N speedo lights.. (NOT on bike nor the floor)

 

 

 

 

u tio ar! swee~

 

 

 

lolx.. meow's paw still can pull clutch ar? haha.. better recover faster by resting more lah...

*take cab there to bai bai or get your friends to pillion you there..

 

his wrist Diy too much liao!!

tio abitbit..hehehe!

[fabianau]

@haoKR thanks... i go see see...

[fabianau]

@haoKR thanks... i go see see...

[Jundeang]

anyway, considering trading out my block carb and pipe cuz might be scraping bike.. $50 w trade each.

 

oh ya.. if wan cert for the pipe, add 1 pack of marlboro light.

[krrRSA]

1st gear above 7k rpm will have extra power.. If you run in finish, you can run hitting 13k 1st gear.. BUT.. hitting 13k. don't "HOLD" it there unless you want your piston to jam.. hahaha..

 

i hope so because in first i get upto 7k and it goes nowhere and shakes, go into second, go to 9k no problem..first gear i have to change at 4k if i want to go fast, she doesnt sound nice at 7-8k in first.. only 300km then shes run in

[.BlackSun.]

Hi pilots. Need to clear my store room. Too much stuff.

 

kr stock cdi (malaysia) $40

kr retifer $20

kr tong exhaust stomach $50

kr stock endcan $30

[.BlackSun.]

Kr fuel tank .diy matt black condition 6/10 (fuel tank need adjust adjust to open) $30

[.BlackSun.]

Kr head fairing diy matt black 6/10 without headlight $20

kr tail diy matt black 6/10 $10

[.BlackSun.]

Kr useable block with slight scratches. (with block head) $50

[.BlackSun.]

Kr stock carb $40

kr stock airbox $20

[.BlackSun.]

My contact 91561609

[.BlackSun.]

Monday blue start liao. Haiz

[adesmond2]

his wrist Diy too much liao!!

tio abitbit..hehehe!

 

nice nice..

 

anyway, considering trading out my block carb and pipe cuz might be scraping bike.. $50 w trade each.

 

oh ya.. if wan cert for the pipe, add 1 pack of marlboro light.

 

what pipe wif cert sia? SG legal meh?

 

i hope so because in first i get upto 7k and it goes nowhere and shakes, go into second, go to 9k no problem..first gear i have to change at 4k if i want to go fast, she doesnt sound nice at 7-8k in first.. only 300km then shes run in

 

haha.. slowly will become nicer n better.. but.. 300km only? I run in 1000km..

 

Hi pilots. Need to clear my store room. Too much stuff.

 

1) kr stock cdi (malaysia) $40

2) kr retifer $20

3) kr tong exhaust stomach $50

4) kr stock endcan $30

5) Kr fuel tank .diy matt black condition 6/10 (fuel tank need adjust adjust to open) $30

6) Kr head fairing diy matt black 6/10 without headlight $20

7) kr tail diy matt black 6/10 $10

8) Kr useable block with slight scratches. (with block head) $50

9) Kr stock carb $40

10) kr stock airbox $20

 

My contact 91561609

 

Dont spam.. I help u arrange swee swee liaoz..

[krrRSA]

well no, the guy who

[KaiRR]

@ krrRSA

 

woah nice colour!

Never knew SG has such colour code for vehicles?

enlighten me anyone?

 

Was about to do a simple dark blue single colour paint job but then got INSPIRED by urs!

[krrRSA]

Sorry meant to say no, the owner of the bike did 700km on the new motor, i just have to do the last 300, i just really hope the motor is better than, i basically have no first gear :'(

 

@KaiRR

 

wat do u mean "Never knew SG has such colour code for vehicles?" i dont understand?

but thanks the bike was green from new, now its white, with green rim tape and stickers

dark blue can look nice with gold spoke rims i wudnt mind that, heres how i want my bike to look

next year

 

and these are lights i am ordering now

either in green or red or blue, red or blue if i make my bike like the 1 in the picture above, green if i leave the bike as is

[krrRSA]

heres more pics of my bike now, i still want to change alot on her

 

and does any1 know where to get a seat cowl? the plastic thing that covers the rear seat? i need that and the rear grab bar and the piece of plastic over the rear wheel.. i cant get them in South Africa, have to order them from overseas.. if any of u have them for sale let me know, i will put the money into your bank and pay for shipping

Edited December 5, 2011 by krrRSA

[bugsy_]

Just call weda enterpise enquries abbout piston n piston ring.. Ori 85. Japan 50.. Just to share wif u..Cn call them if u wan +65 6297 9429

 

Other than piston, rings and gaskets, somemore got what ah? I also planning to buy from weda then ask mech to do...

[adesmond2]

Sorry meant to say no, the owner of the bike did 700km on the new motor, i just have to do the last 300, i just really hope the motor is better than, i basically have no first gear :'(

 

@KaiRR

 

wat do u mean "Never knew SG has such colour code for vehicles?" i dont understand?

but thanks the bike was green from new, now its white, with green rim tape and stickers

dark blue can look nice with gold spoke rims i wudnt mind that, heres how i want my bike to look

next year

[ATTACH=CONFIG]227457[/ATTACH]

 

and these are lights i am ordering now

[ATTACH=CONFIG]227458[/ATTACH]

either in green or red or blue, red or blue if i make my bike like the 1 in the picture above, green if i leave the bike as is

 

no first gear??!! That means your gear is damage! and sorry to say, you need to overhaul to fix that issue..

 

[ATTACH=CONFIG]227460[/ATTACH]

[ATTACH=CONFIG]227459[/ATTACH]

heres more pics of my bike now, i still want to change alot on her

 

and does any1 know where to get a seat cowl? the plastic thing that covers the rear seat? i need that and the rear grab bar and the piece of plastic over the rear wheel.. i cant get them in South Africa, have to order them from overseas.. if any of u have them for sale let me know, i will put the money into your bank and pay for shipping

 

SG have it but it's imported from US or Indonesia.. What I remember is estimated S$100+++..

 

Other than piston, rings and gaskets, somemore got what ah? I also planning to buy from weda then ask mech to do...

 

hmmm.. I know someone here who knows how to dismantle a KR and wanted to give lessons but need a bike that's willing to be "offered" to him..

R u willing?

*he need tools as well..

[krrRSA]

no first gear??!! That means your gear is damage! and sorry to say, you need to overhaul to fix that issue..

 

SG have it but it's imported from US or Indonesia.. What I remember is estimated S$100+++..

 

i do have first but i cant go over 6000rpm.. just does nothing..

 

100 USD for the seat cowl? coz thats alot!

 

hope some1 here has a cowl, handle and rear wheel cover for me

[drak3st3r]

i do have first but i cant go over 6000rpm.. just does nothing..

 

100 USD for the seat cowl? coz thats alot!

 

hope some1 here has a cowl, handle and rear wheel cover for me

He meant 100+++ SGD bro. And what u mean by rear wheel cover. The battery holder cum mudguard or no. Plate holder cum mudguard or chain guard.