Kawasaki KRR150 Riders

[tom3694]

Originally posted by Ti-C@Oct 8 2005, 11:28 AM

white smoke. already tune my 2t intake last time? need to tune again? high rpm then bike got power... why ah?? low gears.. engine like wanna die off.. help pls!!!

why dont ya do a full servicing - change the plug, engine oil, service the valve and

 

decarbonise the muffler

 

its much more easier to trouble-shoot from there

[Ti-C]

Originally posted by tom3694@Oct 8 2005, 01:47 PM

why dont ya do a full servicing - change the plug, engine oil, service the valve and

 

decarbonise the muffler

 

its much more easier to trouble-shoot from there

any idea how much would servicing valve and decarbonise muffler cost?? can give a rough gauge so i wont kena chop?? coz i already change my EO and spark plug. thanks

[tom3694]

Originally posted by Ti-C@Oct 8 2005, 02:34 PM

any idea how much would servicing valve and decarbonise muffler cost?? can give a rough gauge so i wont kena chop?? coz i already change my EO and spark plug. thanks

if my memory served me well servicing of valve ringgit $60, decarbonising of

 

muffler ringgit $70 at ah gua lane in jb

[Jayz_sg]

hi every1,

i recently bought maxima K2 2T.... it says on the bottle 'premix only'.... shd i just pour it to my 2T reservoir or must pour into fuel tank.... if must pour into fuel tank... i think i'am gonna try to return it and get castor 927 instead.....

[tom3694]

Originally posted by FireSpitter@Oct 6 2005, 10:17 PM

I can see that u are finally getting somewhere, and getting smart at the same time!! Congrats!!

uncle need ya advice on suspension set-up leh

 

static sag =??

rider sag =??

 

increase or decrease the preload or rebound when ride goes twichy/headshake

 

with hard acceleration on straight above 160km/h on nc29

 

i went thru many articles until myself also 'gong gong'

[winner]

where can i get spit fire spark pulg cable? and how much?

[patrick1131]

Originally posted by Jayz_sg@Oct 8 2005, 07:08 PM

hi every1,

i recently bought maxima K2 2T.... it says on the bottle 'premix only'.... shd i just pour it to my 2T reservoir or must pour into fuel tank.... if must pour into fuel tank... i think i'am gonna try to return it and get castor 927 instead.....

hi .. i using k2 aso .. william pour it all into my 2T reservoir..

but he sae k2 and 927 nt much diff .. k2 wait 3 mins warm up then can whack le

[d0n]

Originally posted by winner@Oct 8 2005, 11:24 PM

where can i get spit fire spark pulg cable? and how much?

JB ah gua lane

RM$28

[Jayz_sg]

Originally posted by patrick1131@Oct 9 2005, 02:23 AM

hi .. i using k2 aso .. william pour it all into my 2T reservoir..

but he sae k2 and 927 nt much diff .. k2 wait 3 mins warm up then can whack le

anr_impex says that it is too think and cannot be used in 2T pump.... any1?????

[il4]

.......................

Edited February 17, 2016 by il4

[tom3694]

Originally posted by winner@Oct 8 2005, 11:24 PM

where can i get spit fire spark pulg cable? and how much?

not advisable waste of $$ try it myself no diff

[tom3694]

Originally posted by il4@Oct 9 2005, 03:25 AM

yours is a RR model?

yep mine is 95' RR model

 

btw had the front and rear rebuilt by Joshua in april

[rankief]

think its time for me to change my spocket and chains...

 

ok think im getting a DID 428 o-ring chain...

but spocket im not quite sure leh... any recommendation for spocket, brand or wat..

 

so both spocket and chain, where to fetch the best price.. jb also can.. pls recommend! THANKS!

[winner]

Originally posted by tom3694@Oct 9 2005, 04:57 AM

not advisable waste of $$ try it myself no diff

so what spark plug is good?

[tom3694]

Originally posted by winner@Oct 9 2005, 01:00 PM

so what spark plug is good?

be it NGK or DENSO or CHAMPION as long same heat range will do

 

too cold carbon build-up too hot pre-dotonation

 

cultivate the habit of changing spark plug and engine oil,servicing the valve

 

monthly this will benefit more than anything

[rankief]

Originally posted by tom3694@Oct 9 2005, 04:04 PM

be it NGK or DENSO or CHAMPION as long same heat range will do

 

too cold carbon build-up too hot pre-dotonation

 

cultivate the habit of changing spark plug and engine oil,servicing the valve

 

monthly this will benefit more than anything

wat heat range ah?

[winner]

jayz sg when can we see the sample of the one sitter ?

[tom3694]

Originally posted by rankief@Oct 9 2005, 04:29 PM

wat heat range ah?

do some reading to enhance ya knowledge http://www.ngksparkplugs.com/techinfo/spar...1000&country=US

[rankief]

i mean krr is wat heat range?

[Jayz_sg]

Originally posted by winner@Oct 9 2005, 04:59 PM

jayz sg when can we see the sample of the one sitter ?

i am waiting for ppl to add their names lor... the sitter is now being designed.... actually i am taking a huge risk now... i ask the guy to design the product already... he will design it and show it to me prob by end of the mth... if u all fly aeroplane i later die... must pay the guy for designing the product...... i also need to know how many sitters to make... i cannot ask him make 10 then ask him make 5 more coz we buying the fibrglass from overseas..... cannot suka suka ship.... lastly if u really want to get this product fast... go jio all yr KRR frens to add their name lor....

[d0n]

Originally posted by rankief@Oct 9 2005, 12:27 PM

think its time for me to change my spocket and chains...

 

ok think im getting a DID 428 o-ring chain...

but spocket im not quite sure leh... any recommendation for spocket, brand or wat..

 

so both spocket and chain, where to fetch the best price.. jb also can.. pls recommend! THANKS!

last time got DID 428 o-ring + normal quality sprockets for $75 frm LAB

[patrick1131]

Originally posted by d0n^@Oct 10 2005, 02:35 AM

last time got DID 428 o-ring + normal quality sprockets for $75 frm LAB

they sell me NO ring + dunnoe wat sprocket -$45

[angeldogleslie]

hey guys recently my front fork gotten abit squeaky wonder why is it ? fork oil not enough or issit the seal break already ?

[k9999]

Originally posted by d0n^@Oct 10 2005, 02:35 AM

last time got DID 428 o-ring + normal quality sprockets for $75 frm LAB

wow so cheap ah.. u diy yourself ? tat time i ask the bike shop he charge me $110..

[Jayz_sg]

Originally posted by angeldogleslie@Oct 11 2005, 12:41 AM

hey guys recently my front fork gotten abit squeaky wonder why is it ? fork oil not enough or issit the seal break already ?

u press brake and pump the forks hard.... use yr hand touch the forks there see got oily or not... if is oily then yr fork leaking lioz.... time to service yr fork lioz... go jb service quite cheap..... or u got $$ go bikelab and do....